broken Stoeger Luger 22

EatonMauser · 06-07-2003, 12:46 AM

I need to know how the sear works......the sear fits on the trigger and when the trigger is pulled, the sear moves, but it won't engage the hammer when cocked....how is the sear supposed to fit on the assembly? Thanks

policeluger · 06-07-2003, 11:16 AM

By the sear spring, it holds tension on the sear, keeping it in place until you pull the trigger and force the sear out from under the hammer, causing the hammer too fall. If it is not engaging the hammer, there is no spring force/tension pushing it back in place, under the hammer as it where, and leaving the hammer at full ****. While I have worked on Stoeger Lugers at my shop for years, it is far more detail then I can type out here on how it all works, and two way shipping too repair you gun is not cost effective...try the Internet and see if you can find a detailed drawing on how the gun is put together, how parts inter face with each other and see if it helps you.

MG · 07-29-2003, 02:09 AM

Hello,
I do not know if you are still needing help but you might try these links.
Frist is for parts, second for stripping down gun.

http://www.e-gunparts.com/products.a...el=3590zPISTOL

http://www.geocities.com/kemays/slfield1.html

Thanks
Michael

06-07-2003, 12:46 AM	#1
EatonMauser New User Join Date: Jun 2003 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	broken Stoeger Luger 22 I need to know how the sear works......the sear fits on the trigger and when the trigger is pulled, the sear moves, but it won't engage the hammer when cocked....how is the sear supposed to fit on the assembly? Thanks

07-29-2003, 02:09 AM	#3
MG User Join Date: Jun 2002 Posts: 93 Thanks: 0 Thanked 0 Times in 0 Posts	Hello, I do not know if you are still needing help but you might try these links. Frist is for parts, second for stripping down gun. http://www.e-gunparts.com/products.a...el=3590zPISTOL http://www.geocities.com/kemays/slfield1.html Thanks Michael __________________ MG "Si vis pacem, para bellum" 'If you want peace,prepare for war'

06-07-2003, 11:16 AM	#2
policeluger RIP Join Date: Jun 2002 Location: Ca. Posts: 2,141 Thanks: 8 Thanked 89 Times in 54 Posts	By the sear spring, it holds tension on the sear, keeping it in place until you pull the trigger and force the sear out from under the hammer, causing the hammer too fall. If it is not engaging the hammer, there is no spring force/tension pushing it back in place, under the hammer as it where, and leaving the hammer at full ****. While I have worked on Stoeger Lugers at my shop for years, it is far more detail then I can type out here on how it all works, and two way shipping too repair you gun is not cost effective...try the Internet and see if you can find a detailed drawing on how the gun is put together, how parts inter face with each other and see if it helps you.