ejector spring

03-18-2002, 04:45 PM

I have a 1939 shooter, all matching parts that my dad got in the war. The ejector spring broke after a thousand rounds that I know about. I purchased 4 reproduction ejector springs and all have broken after 2 hundred rounds or less ... I have just purchased an other reproduction spring and I have found an origional.

They all break at the chamber end (front) I have installed all the replacement springs my self, with great difficulty, but once installed they seam fine. Is there some trick to the instalation ..like heating the spring ?? I simply hold the weapon in a vise and push from the rear with a blunt flat tip.

Does anyone know why I am having this problem. Your thoughts please. Thanks Dan

Thor · 03-18-2002, 06:23 PM

My guess is your loads are TOO HOT or your main spring is TOO weak~ Thor

Doug · 03-19-2002, 12:33 AM

I don't know why your breaking them. I can tell you an easier way to install and remove them unbroken. I have a piece of 1/2" walnut that I slide between the cannon rails. It easily pushes the ejector tip up and allows you to either pry the end for removal or tap with a plastic mallet for installation. If you have absolutly no clue as to what I'm tring to describe let me know and I'll take some pics.

Thor · 03-19-2002, 01:24 AM

The reason I mentioned the loading is I broke a couple of ejectors by firing really hot loads in them, after I tamed down the loads the problems went away. Thor

04-01-2002, 10:32 AM

Thor Thanks for the response .. sorry I took so long ... Dont know if Hot reloads are the issue ... have only fired new or factory reloads ..

Dan

04-01-2002, 10:35 AM

Doug .. Thanks .. I understand what you are saying ..(I think) just got a couple of new springs last week ... I give it a try ...Dan

03-18-2002, 04:45 PM	#1
Dan Johnson Guest Posts: n/a	ejector spring I have a 1939 shooter, all matching parts that my dad got in the war. The ejector spring broke after a thousand rounds that I know about. I purchased 4 reproduction ejector springs and all have broken after 2 hundred rounds or less ... I have just purchased an other reproduction spring and I have found an origional. They all break at the chamber end (front) I have installed all the replacement springs my self, with great difficulty, but once installed they seam fine. Is there some trick to the instalation ..like heating the spring ?? I simply hold the weapon in a vise and push from the rear with a blunt flat tip. Does anyone know why I am having this problem. Your thoughts please. Thanks Dan

03-18-2002, 06:23 PM	#2
Thor User Join Date: Jun 2002 Location: Rio Rancho, New Mexico Posts: 4,583 Thanks: 958 Thanked 970 Times in 276 Posts	Re: ejector spring My guess is your loads are TOO HOT or your main spring is TOO weak~ Thor

03-19-2002, 12:33 AM	#3
Doug User Join Date: Jan 2004 Location: USA Posts: 168 Thanks: 0 Thanked 0 Times in 0 Posts	Re: ejector spring I don't know why your breaking them. I can tell you an easier way to install and remove them unbroken. I have a piece of 1/2" walnut that I slide between the cannon rails. It easily pushes the ejector tip up and allows you to either pry the end for removal or tap with a plastic mallet for installation. If you have absolutly no clue as to what I'm tring to describe let me know and I'll take some pics.

03-19-2002, 01:24 AM	#4
Thor User Join Date: Jun 2002 Location: Rio Rancho, New Mexico Posts: 4,583 Thanks: 958 Thanked 970 Times in 276 Posts	Re: ejector spring The reason I mentioned the loading is I broke a couple of ejectors by firing really hot loads in them, after I tamed down the loads the problems went away. Thor

04-01-2002, 10:32 AM	#5
Dan Johnson Guest Posts: n/a	Re: ejector spring Thor Thanks for the response .. sorry I took so long ... Dont know if Hot reloads are the issue ... have only fired new or factory reloads .. Dan

04-01-2002, 10:35 AM	#6
Dan Johnson Guest Posts: n/a	Re: ejector spring Doug .. Thanks .. I understand what you are saying ..(I think) just got a couple of new springs last week ... I give it a try ...Dan