New to the forum\Lugers

parisgrim · 02-04-2014, 08:00 AM

Hello everyone,
My name is Jackson from Nashville, TN. I just wanted to introduce myself. I'm a sucker for all things Swiss. I enjoy collecting Swiss rifles (k31, k11, 1911,etc) but have always wanted to add a Swiss Luger to my collection. Now, other than what i've read on the forums I really don't know a lot about them. I browse Simpson's site, specifically the Swiss Lugers, often. Even with Lugers being what they are I just cannot justify spending $3k+. I found several that I'm interested in however I'm curious about a DWM 1906 Swiss example that is just right in my price range. See here. Can I assume that the straw highlights on the numbering\shield are not original?

However, with my logic of only collecting Swiss I feel i should probably be only concentrating on Bern.

alanint · 02-04-2014, 08:08 AM

Welcome to the forum!

From the photos, the strawings looks original. When asessing strawing and other features, look at the overall condition of the gun. Strong strawing on an otherwise average pistol would raise alarms. Swiss Lugers seem to have survived in better condition than most other variations.
This looks like a correct Swiss to me.

parisgrim · 02-04-2014, 08:12 AM

Alanit,
Thanks! After going through the rest of the Lugers I didn't find another that had the straw highlights. Perhaps it was special ordered for someone as a gift that way?
Swiss guns are generally in remarkably good shape since they have remained neutral since 1815. I'll droll on it for a bit longer and make up my mind.

John Sabato · 02-04-2014, 08:47 AM

They have managed to stay neutral in the worst of times, but they have always been prepared for defense. When you serve in the military there, you end up taking the weapon you were trained with home with you after your service is over, in the event you should need to be recalled. Can you imagine how difficult a house to house takeover would be in Switzerland? That is why the Germans didn't try it in WW2.

The swiss guns are found in remarkably good shape because the swiss have/had a very intensive maintenance program for their ordnance... Guns were probably refinished on an annual or at least periodic basis to make sure they not only functioned but look good. The swiss Lugers were refinished many times by the swiss arsenal at Bern... A refinish on swiss guns is ususally a really good one.

Good luck on your gun purchase, it is a very nice one...and welcome to the Lugerforum.

parisgrim · 02-04-2014, 09:15 AM

While Yamamoto never actually stated "You cannot invade the mainland United States. There would be a rifle behind every blade of grass" the phrase, i believe for now, still rings true.
Alas though I'd be afraid to shoot such a pretty piece.

Neil Young · 02-04-2014, 09:20 AM

Are you referring to the white highlighted shield and other stamps? If so, that is just some sort of white pigment that is rubbed into the stamp depressions to enable you to see them better in photos. It can be removed quite easily.

parisgrim · 02-04-2014, 09:33 AM

Neil,
Yes, the highlights are what I'm talking about. I've seen white paint\whatever used before to highlight serial numbers and the like, however, it appears straw in color on my screen.
However, now when i zoom into the photo i see that the pigment has just turned in color probably due to age. What would be the best way to remove the highlighting material?

NYRommel · 02-04-2014, 09:35 AM

I don't know what your budget is but here is a link to a Swiss that seems to be in outstanding condition.
http://luger.gunboards.com/showthrea...ossibly-others

Good luck with your purchase.

Neil Young · 02-04-2014, 09:50 AM

Gun oil and a brush should do it.

parisgrim · 02-04-2014, 09:56 AM

Rommel,
Thanks for the post. Those are pretty nice but it's pushing the envelope for me. I think my heart may be set on this 1906 DWM.

Neil,
Thanks for the advise.

mrerick · 02-04-2014, 11:25 AM

This is a very nice Luger, and you'll be impressed.

Note that it was made in Germany (Berlin) by DWM under a contract for the Swiss. There are other later Lugers that were actually made by the Swiss.

They took good care of their firearms. Many of these are in remarkable condition for their age. As mentioned above, they had a regular maintenance program.

The Swiss M1900, 1900/06 and W+F manufactured 1906/24 Lugers all incorporate strawed parts. The later ones made by the Swiss were all blued.

Note that many of Simpson's Swiss Lugers are import marked.

parisgrim · 02-04-2014, 12:02 PM

mrerick,
I've bought several k11's from them (Simpson's) and they aren't particularly... discrete with their import markings. I would assume that import markings negatively affect the value of the piece?
Also, I've never shot a 30 Luger before. While I highly doubt that I will ever fire this handgun If i were to purchase a shooter grade Luger in 30 where would a good source of ammunition be?

ithacaartist · 02-04-2014, 02:24 PM

Quote:

Originally Posted by parisgrim

mrerick,If i were to purchase a shooter grade Luger in 30 where would a good source of ammunition be?

All the usual large online sources list it. It is available periodically, usually for $25/box or less. Be patient and jump on some when it appears. Otherwise, check Gunbroker and auction/classified sites, where it will appear whenever. The U.S. made stuff is priced in the stratosphere, but I guess if you gotta, you gotta...

this might also help: http://ammoseek.com/

02-04-2014, 08:00 AM	#1
parisgrim User Join Date: Feb 2014 Posts: 7 Thanks: 0 Thanked 1 Time in 1 Post	New to the forum\Lugers Hello everyone, My name is Jackson from Nashville, TN. I just wanted to introduce myself. I'm a sucker for all things Swiss. I enjoy collecting Swiss rifles (k31, k11, 1911,etc) but have always wanted to add a Swiss Luger to my collection. Now, other than what i've read on the forums I really don't know a lot about them. I browse Simpson's site, specifically the Swiss Lugers, often. Even with Lugers being what they are I just cannot justify spending $3k+. I found several that I'm interested in however I'm curious about a DWM 1906 Swiss example that is just right in my price range. See here. Can I assume that the straw highlights on the numbering\shield are not original? However, with my logic of only collecting Swiss I feel i should probably be only concentrating on Bern.

02-04-2014, 08:47 AM	#4
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,150 Thanks: 3,003 Thanked 2,304 Times in 1,096 Posts	They have managed to stay neutral in the worst of times, but they have always been prepared for defense. When you serve in the military there, you end up taking the weapon you were trained with home with you after your service is over, in the event you should need to be recalled. Can you imagine how difficult a house to house takeover would be in Switzerland? That is why the Germans didn't try it in WW2. The swiss guns are found in remarkably good shape because the swiss have/had a very intensive maintenance program for their ordnance... Guns were probably refinished on an annual or at least periodic basis to make sure they not only functioned but look good. The swiss Lugers were refinished many times by the swiss arsenal at Bern... A refinish on swiss guns is ususally a really good one. Good luck on your gun purchase, it is a very nice one...and welcome to the Lugerforum. __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

02-04-2014, 09:20 AM	#6
Neil Young Lifer Lifetime Forum Patron Join Date: Jun 2008 Location: Scottsboro, Alabama Posts: 540 Thanks: 546 Thanked 438 Times in 165 Posts	Are you referring to the white highlighted shield and other stamps? If so, that is just some sort of white pigment that is rubbed into the stamp depressions to enable you to see them better in photos. It can be removed quite easily. __________________ Neil The hurrier I go the behinder I get. Sometimes it takes me all day to get nothing done.

02-04-2014, 09:50 AM	#9
Neil Young Lifer Lifetime Forum Patron Join Date: Jun 2008 Location: Scottsboro, Alabama Posts: 540 Thanks: 546 Thanked 438 Times in 165 Posts	Gun oil and a brush should do it. __________________ Neil The hurrier I go the behinder I get. Sometimes it takes me all day to get nothing done.

02-04-2014, 11:25 AM	#11
mrerick Super Moderator - Patron LugerForum Life Patron Join Date: Dec 2009 Location: Eastern North Carolina, USA Posts: 3,900 Thanks: 1,372 Thanked 3,094 Times in 1,503 Posts	This is a very nice Luger, and you'll be impressed. Note that it was made in Germany (Berlin) by DWM under a contract for the Swiss. There are other later Lugers that were actually made by the Swiss. They took good care of their firearms. Many of these are in remarkable condition for their age. As mentioned above, they had a regular maintenance program. The Swiss M1900, 1900/06 and W+F manufactured 1906/24 Lugers all incorporate strawed parts. The later ones made by the Swiss were all blued. Note that many of Simpson's Swiss Lugers are import marked. __________________ Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war.

02-04-2014, 08:08 AM	#2
alanint User Join Date: Mar 2008 Location: Marco Island, Florida Posts: 4,867 Thanks: 1,685 Thanked 1,916 Times in 1,192 Posts	Welcome to the forum! From the photos, the strawings looks original. When asessing strawing and other features, look at the overall condition of the gun. Strong strawing on an otherwise average pistol would raise alarms. Swiss Lugers seem to have survived in better condition than most other variations. This looks like a correct Swiss to me.

02-04-2014, 08:12 AM	#3
parisgrim User Join Date: Feb 2014 Posts: 7 Thanks: 0 Thanked 1 Time in 1 Post	Alanit, Thanks! After going through the rest of the Lugers I didn't find another that had the straw highlights. Perhaps it was special ordered for someone as a gift that way? Swiss guns are generally in remarkably good shape since they have remained neutral since 1815. I'll droll on it for a bit longer and make up my mind.

02-04-2014, 09:15 AM	#5
parisgrim User Join Date: Feb 2014 Posts: 7 Thanks: 0 Thanked 1 Time in 1 Post	While Yamamoto never actually stated "You cannot invade the mainland United States. There would be a rifle behind every blade of grass" the phrase, i believe for now, still rings true. Alas though I'd be afraid to shoot such a pretty piece.

02-04-2014, 09:33 AM	#7
parisgrim User Join Date: Feb 2014 Posts: 7 Thanks: 0 Thanked 1 Time in 1 Post	Neil, Yes, the highlights are what I'm talking about. I've seen white paint\whatever used before to highlight serial numbers and the like, however, it appears straw in color on my screen. However, now when i zoom into the photo i see that the pigment has just turned in color probably due to age. What would be the best way to remove the highlighting material?

02-04-2014, 09:35 AM	#8
NYRommel User Join Date: Nov 2013 Posts: 17 Thanks: 1 Thanked 0 Times in 0 Posts	I don't know what your budget is but here is a link to a Swiss that seems to be in outstanding condition. http://luger.gunboards.com/showthrea...ossibly-others Good luck with your purchase.

02-04-2014, 09:56 AM	#10
parisgrim User Join Date: Feb 2014 Posts: 7 Thanks: 0 Thanked 1 Time in 1 Post	Rommel, Thanks for the post. Those are pretty nice but it's pushing the envelope for me. I think my heart may be set on this 1906 DWM. Neil, Thanks for the advise.

02-04-2014, 12:02 PM	#12
parisgrim User Join Date: Feb 2014 Posts: 7 Thanks: 0 Thanked 1 Time in 1 Post	mrerick, I've bought several k11's from them (Simpson's) and they aren't particularly... discrete with their import markings. I would assume that import markings negatively affect the value of the piece? Also, I've never shot a 30 Luger before. While I highly doubt that I will ever fire this handgun If i were to purchase a shooter grade Luger in 30 where would a good source of ammunition be?