Are Stock Lugs All The Same

cirelaw · 01-06-2015, 03:20 PM

My stocks are not interchangeable! Neither are both my artillerys. On the left is the artillery with most wear! The logistics of fitting each must have taken a lot of work and time! The 1908 navy is in the middle with nominal wear. The is no wear at all on the 1937 Krieghoff. A stock lug maybe used only in production process and in the blueing process~ Eric

sheepherder · 01-06-2015, 04:06 PM

My attaching iron wouldn't latch right...But I fixed it...

Ron Wood · 01-06-2015, 04:16 PM

That wood rasp looks effective, but wouldn't a cutting torch been quicker?

Ron Wood · 01-06-2015, 04:19 PM

Quote:

Originally Posted by cirelaw

My stocks are not interchangeable! Neither are both my artillerys. On the left is the artillery with most wear! The logistics of fitting each must have taken a lot of work and time! The 1908 navy is in the middle with nominal wear. The is no wear at all on the 1937 Krieghoff. A stock lug maybe used only in production and in the blueing process~

I think the most time I have spent on fitting a stock iron is maybe 15 minutes. You don't have to remove a lot of metal. I am sure the original fitters knocked them out very quickly.

cirelaw · 01-06-2015, 04:23 PM

Were they fited in post production or at the factory to match the gun?

LU1900 · 01-07-2015, 11:13 PM

I think at the factory and after the sn is applied/stamped

alvin · 01-08-2015, 12:12 AM

Quote:

Originally Posted by LU1900

I think at the factory and after the sn is applied/stamped

Supposedly, the stock was numbered after fitting to the gun.

For commercial pistols, that's even more interesting. How did factory know future customer would want that stock. They did not know. Blindly making a stock for every gun could be waste. The most efficient way would be: matching stocks to guns after receiving customer order. Probably past statistics could tell them the rough ratio of gun and stock to make, so they could do production planning.

For contract pistols, that decision was easy. The stock option must be specified in contact.

Sergio Natali · 01-08-2015, 07:30 AM

Since 1914 all Lugers bear a stock lug and a hold-open, but apparently very few had a wooden stock.
I read that the actual stock lug was useful for the work of the tooling machines as a bit to hold while working on the metal.

Sergio

01-06-2015, 03:20 PM	#1
cirelaw Lifer Lifetime Forum Patron Join Date: Dec 2003 Location: PORT ST LUCIE, FLORIDA Posts: 12,216 Thanks: 6,209 Thanked 4,133 Times in 2,173 Posts	Are Stock Lugs All The Same My stocks are not interchangeable! Neither are both my artillerys. On the left is the artillery with most wear! The logistics of fitting each must have taken a lot of work and time! The 1908 navy is in the middle with nominal wear. The is no wear at all on the 1937 Krieghoff. A stock lug maybe used only in production process and in the blueing process~ Eric Attached Thumbnails

01-06-2015, 04:06 PM	#2
sheepherder Lifer Lifetime Forum Patron Join Date: Feb 2009 Location: ...on the 'ol Erie Canal... Posts: 8,182 Thanks: 1,400 Thanked 4,442 Times in 2,330 Posts	My attaching iron wouldn't latch right...But I fixed it... Attached Images __________________ I like my coffee the way I like my women... ...Cold and bitter...

01-06-2015, 04:16 PM	#3
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 7,019 Thanks: 1,090 Thanked 5,173 Times in 1,701 Posts	That wood rasp looks effective, but wouldn't a cutting torch been quicker? __________________ If it's made after 1918...it's a reproduction

01-07-2015, 11:13 PM	#6
LU1900 User Join Date: Jul 2003 Location: FRANCE Posts: 907 Thanks: 40 Thanked 468 Times in 196 Posts	I think at the factory and after the sn is applied/stamped __________________ Best regards from France...Patrice https://www.fichier-pdf.fr/2016/03/1...nd-snail-drum/

01-08-2015, 07:30 AM	#8
Sergio Natali User Join Date: Feb 2013 Location: Somewhere in Northern Italy Posts: 2,646 Thanks: 1,082 Thanked 1,783 Times in 1,007 Posts	Since 1914 all Lugers bear a stock lug and a hold-open, but apparently very few had a wooden stock. I read that the actual stock lug was useful for the work of the tooling machines as a bit to hold while working on the metal. Sergio __________________ "Originality can't be restored and should be at the top of any collector's priority list.

01-06-2015, 04:23 PM	#5
cirelaw Lifer Lifetime Forum Patron Join Date: Dec 2003 Location: PORT ST LUCIE, FLORIDA Posts: 12,216 Thanks: 6,209 Thanked 4,133 Times in 2,173 Posts	Were they fited in post production or at the factory to match the gun?