my profile |
register |
faq |
search upload photo | donate | calendar |
04-19-2024, 07:59 AM | #1 |
User
Join Date: Apr 2024
Posts: 6
Thanks: 1
Thanked 1 Time in 1 Post
|
655 loading tool question
Hello, new to this community. So not sure where to post. I was wondering if yall who know what their talking about know if this takedown tool looks legit or not? Im not really sure what to look for. So any advice is helpful.
|
The following member says Thank You to Luke99 for your post: |
04-19-2024, 10:40 AM | #2 |
Lifer
Lifetime Forum Patron Join Date: Aug 2006
Location: Florida
Posts: 437
Thanks: 654
Thanked 492 Times in 218 Posts
|
Difficult to say because of dark photos. BUT...the first, and sometimes the best test is the drop test.
Simply find a solid surface like marble, granite, ceramic, etc., found in kitchens and bathrooms or tile floors Then drop the tool from about a foot or so. If it THUNKS. Throw it away. If it clinks like a delicate bell it's probably good. These tools were made of very hardened steel and the hardening process gives it the clinkey, bell like sound. Hopes this helps. John |
The following 2 members says Thank You to guns3545 for your post: |
04-19-2024, 11:01 AM | #3 |
User
Join Date: Apr 2024
Posts: 6
Thanks: 1
Thanked 1 Time in 1 Post
|
I can do that. I have also heard that the legit tools are around 2.4-2.5mm thick and most reproductions are around 3mm? The main thing im concerned about is the deep stamp? I've seen alot of legit ones with a light stamp on them.
|
04-19-2024, 02:37 PM | #4 |
Moderator
Lifetime Forum Patron Join Date: Jun 2002
Location: Arizona/Colorado
Posts: 7,768
Thanks: 4,896
Thanked 3,122 Times in 1,433 Posts
|
WHITE backgrounds take the WORST photos with auto settings. White REFLECTS light and shuts off detail of the tool. Use a dark background for better detail.
The hole lip and the screwdriver tip are important details.
__________________
Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know." |
The following 2 members says Thank You to lugerholsterrepair for your post: |
04-19-2024, 05:41 PM | #5 |
User
Join Date: Apr 2024
Posts: 6
Thanks: 1
Thanked 1 Time in 1 Post
|
I agree, these are the sellers pics. I have not actually gotten the tool yet.
|
04-20-2024, 01:34 AM | #6 |
User
Join Date: Jun 2009
Location: Germany
Posts: 517
Thanks: 0
Thanked 411 Times in 160 Posts
|
It's ok, you can buy it.
|
The following 3 members says Thank You to klaus 3338 for your post: |
04-20-2024, 08:38 AM | #7 |
User
Join Date: Aug 2023
Posts: 73
Thanks: 18
Thanked 56 Times in 34 Posts
|
If it's fake then I wouldn't throw it away if you plan to take it to the range occasionally. Better to use a fake as a mag loading assist tool than an original. Let it take all the finish wear and keep any originals as collectibles or display items.
Even the screwdriver blade on a fake is usually still adequate to remove the grips at the range if necessary. Some fakes are better than others in that respect. -Bob |
The following member says Thank You to velodog455~ for your post: |
Thread Tools | |
Display Modes | |
|
|