my profile |
register |
faq |
search upload photo | donate | calendar |
|
05-18-2024, 06:38 PM | #1 |
User
Join Date: May 2024
Posts: 7
Thanks: 0
Thanked 1 Time in 1 Post
|
Erfurt Magazine Mystery
New to the forum, and just picked up a super-clean 1914 Erfurt LP-08 Artillery. I'm not a "condition collector", but all the parts do happen to match, except...
I'm a bit suspicious of the magazine. As you can see in the photos, the wood mag bottom is stamped with the matching serial number, as well as the two imperial proof marks. However, the mag tube has the "D" shaped crimp near the top, which several sources indicate is characteristic of DWM magazines, not Erfurt. So what are your thoughts on what I have here? Erfurt ran out of tubes and sourced some from DWM? Someone damaged the feed lips and swapped out the tube with a good DWM one, but keeping the original wood bottom? (seems unlikely) Or did some turkey actually go to the trouble of getting an old unmarked DWM mag and FAKE the serial numbers and the proof marks? (this also seems pretty unlikely but greed can be a powerful motivator). Something I haven't thought of? My reason for asking is not to go after the seller, as I love the pistol and the price was fair, but I would not clean and load an ORIGINAL MATCHING wood mag for actual firing, but would have no problem doing that with a repro/fake. Your thoughts, kind experts. |
The following member says Thank You to BadWolf for your post: |
05-18-2024, 07:53 PM | #2 |
Super Moderator
Eternal Lifer LugerForum Patron Join Date: Jun 2002
Location: North of Spokane, WA
Posts: 15,926
Thanks: 2,014
Thanked 4,523 Times in 2,089 Posts
|
Looks ok to me, except its fairly nice. Show us a left and right so we can see if the pin has been in and out.
Over the years I've swapped bases that were broken onto a nice body, and not worth a hoot on telling if erfurt or dwm unless i really try hard.
__________________
Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV |
The following member says Thank You to Edward Tinker for your post: |
05-18-2024, 08:38 PM | #3 |
User
Join Date: May 2024
Posts: 7
Thanks: 0
Thanked 1 Time in 1 Post
|
Side photos of mag
|
05-19-2024, 10:01 AM | #4 |
User
Join Date: Nov 2013
Location: Southwest Virginia
Posts: 366
Thanks: 762
Thanked 541 Times in 193 Posts
|
I have a similar early Erfurt magazine with the “D” shaped crimp, so I’m also curious to hear.
__________________
John 8:32 reive (riːv) vb (Military) (intr) dialect Scot and Northern English to go on a plundering raid [variant of reave] ˈreiver n e.g., " Some view the Border Reivers as loveable rogues." |
The following 2 members says Thank You to Bill_in_VA for your post: |
05-19-2024, 08:32 PM | #5 |
Twice a Lifer
Lifetime Forum Patron Join Date: Mar 2011
Location: Atop the highest hill in Schuyler County NY
Posts: 3,327
Thanks: 7,216
Thanked 2,544 Times in 1,352 Posts
|
The mag bottom displays rather crusty looking "dishes," while the bottom is smooth and clean, and appears recently finished. The parts of the knobs' circumferences that become flatter when the serial number is removed look pretty danged flattened to me. The pins don't seem to have been disturbed, so my sense is that it's a DWM mag that was force-matched to this pistol.
The digits of the font used to number the mag should be compared to others known to have been marked at that time, which may yield further clues. It would be a shame to blow out the bottom of an original mag, whether it's been doctored or not. Grab a couple Mec-Gar mags next chance you get, and use those for shooting.
__________________
"... Liberty is the seed and soil, the air and light, the dew and rain of progress, love and joy."-- Robert Greene Ingersoll 1894 |
The following member says Thank You to ithacaartist for your post: |
05-20-2024, 07:07 PM | #6 |
User
Join Date: May 2024
Posts: 7
Thanks: 0
Thanked 1 Time in 1 Post
|
Thank you Ithaca Artist - a reworked mag SN does seem the most probable.
But as you suggested, I looked at the font of the SN stamp on the mag in question, and though I have no other period mags to compare it to, I DO have the gun. And here it is... The font on the mag IS a close match to the SN font on the gun itself. And then we have the two inspection marks on the mag bottom, AND it even appears that the script "f" as the alphabet part of the SN was put on there as well (unless that's a dent). Is it a dent? Anyway, seems like the extra markings beyond the SN itself are a lot of effort to go through to fake up a mag. So I had a thought. It appears the gun has rework/repair marks on it - could the mag have been reworked at the factory? And one final general comment - I noticed there are inspection marks on the GRIP SCREWS! I love it! As a person of German/Swedish descent myself, this kind of anal retentiveness really resonates with me. |
05-21-2024, 01:47 AM | #7 |
Twice a Lifer
Lifetime Forum Patron Join Date: Mar 2011
Location: Atop the highest hill in Schuyler County NY
Posts: 3,327
Thanks: 7,216
Thanked 2,544 Times in 1,352 Posts
|
Yep, that's part of the charm of an Erfurt!
The font on the mag looks reasonable, but I'm pretty sure my knowledge would demonstrate the Peter Principle beyond this.
__________________
"... Liberty is the seed and soil, the air and light, the dew and rain of progress, love and joy."-- Robert Greene Ingersoll 1894 |
05-21-2024, 02:22 AM | #8 |
User
Join Date: Jun 2002
Location: Byron, Georgia
Posts: 1,694
Thanks: 792
Thanked 1,676 Times in 550 Posts
|
The last year that Erfurt put inspection stamps on the grip screws was 1914. For someone who has a 1914 or earlier Erfurt, those screws can be hard to find... and expensive.
|
The following 3 members says Thank You to Doubs for your post: |
05-21-2024, 10:20 AM | #9 |
User
Join Date: May 2024
Posts: 7
Thanks: 0
Thanked 1 Time in 1 Post
|
Well how that mag and gun came together is still a cool story, even if it's not the one I would have preferred. My vision: A dark smoky room, somewhere in an industrial area of France, where they labor over their illicit stamps and mismatched Lugers and cackle "HaHa, we will fix those stupid Americans!" Sadly I'm that guy.
|
05-21-2024, 01:47 PM | #10 |
Lifer
Lifetime Forum Patron Join Date: Apr 2015
Location: Austin, Texas
Posts: 709
Thanks: 2,073
Thanked 590 Times in 316 Posts
|
This is why I love Erfurt's !
Thanks for sharing yours |
05-21-2024, 03:36 PM | #11 |
User
Join Date: May 2024
Posts: 7
Thanks: 0
Thanked 1 Time in 1 Post
|
You're welcome, and thank you all for the responses!
|
05-22-2024, 04:05 AM | #12 |
User
Join Date: Jun 2009
Location: Germany
Posts: 517
Thanks: 0
Thanked 411 Times in 160 Posts
|
Sorry, but I see a DWM magazine with faked acceptance marks on the wood.
|
The following 3 members says Thank You to klaus 3338 for your post: |
05-22-2024, 08:37 AM | #13 |
User
Join Date: Nov 2013
Location: Southwest Virginia
Posts: 366
Thanks: 762
Thanked 541 Times in 193 Posts
|
Those rc’d grip screws are a new one on me!
__________________
John 8:32 reive (riːv) vb (Military) (intr) dialect Scot and Northern English to go on a plundering raid [variant of reave] ˈreiver n e.g., " Some view the Border Reivers as loveable rogues." |
05-22-2024, 04:59 PM | #14 |
User
Join Date: May 2024
Posts: 7
Thanks: 0
Thanked 1 Time in 1 Post
|
The lazy buggers could have at least faked the right magazine! I'm a bit disappointed now.
I collect antique Griswold cast iron cookware - and there are jerks out there reproducing THAT! Seriously. A fake frypan. |
05-24-2024, 02:09 PM | #15 |
Always A
Lifetime Forum Patron Join Date: Jul 2009
Location: Colorado
Posts: 2,417
Thanks: 225
Thanked 2,603 Times in 933 Posts
|
Hi Bad Wolf, (I'm old-fashioned, I start every message with a salutation),
The grain lines on the magazine base are consistent with beech wood, which was a late war (1917-1918) expedient. I would not expect to see it on a 1914 magazine. Norm |
The following 3 members says Thank You to Norme for your post: |
05-24-2024, 04:29 PM | #16 |
User
Join Date: May 2024
Posts: 7
Thanks: 0
Thanked 1 Time in 1 Post
|
Thank you Norme. Interesting observation, and the wood species never even crossed my mind. The consensus seems to be I have late-war DWM mag with BS Erfurt markings. Not as collectable, but perhaps the better campfire story.
I think I'll carefully de-gunk the interior of the mag, lube it, and give it a try. I have a repro stainless wood bottom mag from a website somewhere in the UK I know functions well in my 1920s commercial, as well as a blued mag from Holland I found at a flea market I want to try. One of them will shoot for sure. The finish isn't perfect on this 1914 Erfurt LP-08, but the wearing parts basically show no wear. I don't think this was ever fired much. Much appreciate all the insights you've all given me! Cheers! |
Thread Tools | |
Display Modes | |
|
|