toggle disassembly

Rick W. · 05-03-2002, 06:08 PM

i

Aaron · 05-03-2002, 09:53 PM

The pin you are referring to only can come out by pushing from the right side of the toggle toward the left side. If it is a bit stiff, tap it out with a small wooden dowel.

Thor · 05-03-2002, 10:02 PM

Yes, you need a punch slightly smaller (metric) than 1/16" to drive the small pin out, I prefer to drive them down towards the inside. Then you drift the larger pin sideways right to left, these will sometimes fall out once the small vertical keeper pin is removed. The smaller pin may be damaged upon removal, they are really tight and small. Thor

05-03-2002, 06:08 PM	#1
Rick W. User Join Date: Jun 2002 Posts: 339 Thanks: 81 Thanked 359 Times in 198 Posts	toggle disassembly i

05-03-2002, 09:53 PM	#2
Aaron Banned Join Date: Jun 2002 Location: Vista, CA Posts: 1,008 Thanks: 0 Thanked 9 Times in 9 Posts	Re: toggle disassembly The pin you are referring to only can come out by pushing from the right side of the toggle toward the left side. If it is a bit stiff, tap it out with a small wooden dowel.

05-03-2002, 10:02 PM	#3
Thor User Join Date: Jun 2002 Location: Rio Rancho, New Mexico Posts: 4,583 Thanks: 958 Thanked 970 Times in 276 Posts	Re: toggle disassembly Yes, you need a punch slightly smaller (metric) than 1/16" to drive the small pin out, I prefer to drive them down towards the inside. Then you drift the larger pin sideways right to left, these will sometimes fall out once the small vertical keeper pin is removed. The smaller pin may be damaged upon removal, they are really tight and small. Thor