my profile |
register |
faq |
search upload photo | donate | calendar |
05-13-2012, 08:02 PM | #1 |
Super Moderator - Patron
LugerForum Life Patron Join Date: Dec 2009
Location: Eastern North Carolina, USA
Posts: 3,909
Thanks: 1,374
Thanked 3,110 Times in 1,510 Posts
|
Study Identifying Luger Caliber: .30 Luger or 9mm Luger?
Here are some illustrations to help with identifying the caliber your luger was made in.
The original Luger cartridge was the .30 Luger (7.65x21mm Parabellum), a bottleneck cartridge. The chamber that this cartridge fits into has a stepped shape that supports the bottleneck. The 9mm Luger (9mm x 19mm Parabellum) cartridge has a similar cartridge base, and does not have the bottleneck. This is why the one Luger magazine design can work with both cartridges. Several posts mention the "pencil test". The fact is that a hex shaped (sharp edges) No. 2 pencil Will snugly fit down a .30 Luger caliber barrel. A round No. 2 pencil generally will not fit down the .30 Luger barrel. Both pencils will loosely fit down a 9mm Luger barrel. The pictures attached to this post are annotated. They first show a 9mm cartridge placed in a .30 Luger barrel's chamber. It will NOT fit properly into this chamber, and would do damage if it went off (photos are of a dummy cartridge). It will stick out of the chamber, and the toggle train will not go into battery. Next, pictures show how a 9mm Luger round will rest on the end of a .30 Luger barrel, and a 9mm Luger barrel. Next, a Hex No. 2 pencil fits tightly into a .30 Luger barrel, and a Round No. 2 pencil rests on top of the .30 Luger Barrel. Next, a Hex No. 2 pencil fits loosely into a 9mm Luger barrel, and a Round No. 2 pencil fits loosely into a 9mm Barrel. Hope that these help you identify the caliber of your Luger! Marc
__________________
Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war. Last edited by mrerick; 04-23-2017 at 07:55 PM. |
05-13-2012, 08:38 PM | #2 |
User
Join Date: Mar 2008
Location: Marco Island, Florida
Posts: 4,867
Thanks: 1,685
Thanked 1,916 Times in 1,192 Posts
|
Hard to believe, but this "primer" seems to have been necessary lately...
Thanks, Marc!! |
05-13-2012, 09:08 PM | #3 |
Lifer
Lifetime Forum Patron Join Date: Feb 2009
Location: ...on the 'ol Erie Canal...
Posts: 8,183
Thanks: 1,400
Thanked 4,442 Times in 2,330 Posts
|
Here's my contribution - 7.65mm Luger on left; 9mm Luger on right...
And since most of us will have a 5/16" drill bit lying around, the bit will fit in a 9mm barrel but not a 7.65mm barrel... (It'll be a very sloppy fit in the 9mm)
__________________
I like my coffee the way I like my women... ...Cold and bitter... |
05-13-2012, 09:15 PM | #4 |
Moderator
Lifetime Forum Patron Join Date: Jun 2002
Location: Arizona/Colorado
Posts: 7,772
Thanks: 4,940
Thanked 3,124 Times in 1,434 Posts
|
Rich..And since most of us will have a 5/16" drill bit lying around, the bit will fit in a 9mm barrel but not a 7.65mm barrel...
That's not true! I turned on my drill and it went right in! Few shavings and chips but in it went! HAHA! Seriously... should move this over to a sticky. Good Job Rich and Eric
__________________
Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know." |
The following 3 members says Thank You to lugerholsterrepair for your post: |
05-14-2012, 06:32 PM | #5 |
Patron
LugerForum Patron Join Date: Mar 2011
Location: Az.
Posts: 2,292
Thanks: 2,709
Thanked 973 Times in 718 Posts
|
Excellent illustrations in an easy format.
|
05-15-2012, 11:13 AM | #6 |
User
Join Date: Aug 2002
Location: South America
Posts: 948
Thanks: 598
Thanked 584 Times in 254 Posts
|
A very nice tutorial, that proved needed lately.
|
05-15-2012, 01:52 PM | #7 |
Patron
LugerForum Patron Join Date: Aug 2004
Location: Houston, TX
Posts: 1,429
Thanks: 67
Thanked 292 Times in 191 Posts
|
We need to keep Jerry away from power tools! Best stick with a needle and thread, Jerry!
__________________
Regards, Don donmaus1@aol.com Author of History Writ in Steel: German Police Markings 1900-1936 http://www.historywritinsteel.com |
The following member says Thank You to Don M for your post: |
01-31-2013, 11:03 AM | #8 |
Super Moderator - Patron
LugerForum Life Patron Join Date: Dec 2009
Location: Eastern North Carolina, USA
Posts: 3,909
Thanks: 1,374
Thanked 3,110 Times in 1,510 Posts
|
This question keeps coming up. Sticky?
Marc
__________________
Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war. |
01-31-2013, 02:09 PM | #9 |
Lifer
Lifetime Forum Patron Join Date: Jun 2002
Location: The Capital of the Free World
Posts: 10,154
Thanks: 3,003
Thanked 2,306 Times in 1,097 Posts
|
Excellent Tutorial on distinguishing .30 caliber from 9mm. I will make it a "sticky"!
__________________
regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL and are endowed by their Creator with certain UNALIENABLE rights, and among these are life, LIBERTY, and the pursuit of happiness..." |
04-23-2017, 04:44 PM | #10 |
Lifer
Lifetime Forum Patron Join Date: Dec 2003
Location: PORT ST LUCIE, FLORIDA
Posts: 12,216
Thanks: 6,209
Thanked 4,133 Times in 2,173 Posts
|
Up until 1908 with the exception of the commercial fat barrel 1902, 7.65 including the Swiss was the only calibre that I am aware! All the 1908 models Army, Commercial and Military were the 9mm. A few 1920 carbines retained the smaller calibre 7.65. as many used leftover parts during the Weimer era~
|
04-23-2017, 04:53 PM | #11 |
Moderator
Lifetime Forum Patron Join Date: Jun 2002
Location: Arizona/Colorado
Posts: 7,772
Thanks: 4,940
Thanked 3,124 Times in 1,434 Posts
|
Was there a specific time when the switch occurred from 7.65 x 21mm (.30 Luger) bottleneck cartridge to the 9 x 19mm Parabellum cartridge? Yes, almost immediately after George Luger invented it.
Was this transition across the board (did all manufacturers change simultaneously)? Yes, since there was only one manufacturer, DWM. What was the reason for the change (i suspect it had to do with the forever argued concept of knockdown power)? Exactly! Good guess! There is little to argue about here really. BIGGER is better 100% of the time.
__________________
Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know." |
The following member says Thank You to lugerholsterrepair for your post: |
04-23-2017, 05:11 PM | #12 | |
User
Join Date: Feb 2015
Location: Switzerland
Posts: 63
Thanks: 1
Thanked 45 Times in 23 Posts
|
Quote:
|
|
Tags |
caliber, pencil, test |
Thread Tools | |
Display Modes | |
|
|