HI ED, Erics technical question??

cirelaw · 08-18-2010, 10:39 AM

Often I post an issue and like to reference where it is discussed. It took me 5 years to be able to post photographs and is the procedure the same on both sites? Thank You Uncle ED!

Edward Tinker · 08-18-2010, 12:25 PM

Yes, primarily by luck, and what is considered the best software out there.

A few improvements actually on this site, John has made it easier to post much larger pictures, it self shrinks them here.

The picture shown was 1.92 megabytes; this trick will not work on Jan's forum, as John did some special software changes (he is a genius when it comes to computers, seriously)

HOWEVER, keep in mind that the forums EACH require logging on and you must be a member. There are many, many folks who are NOT members on both forums.

Ed

cirelaw · 08-18-2010, 12:31 PM

Tks I need to know how to include post access to a site like You do above 'http://www.simpsonlugers.com' all you need and it brings you there.

Edward Tinker · 08-18-2010, 12:34 PM

You mean how to have you have your own signature line?

Too hard for me to write it

Write me or here what you want and I will include it in both of your forum ID's

ed

ed_tinker@hotmail.com

cirelaw · 08-18-2010, 01:10 PM

No say Simpson is selling your book, i want to include the exact address to that exact page taking my there, Hit the exact site and page, You did it yourself!!! Started out with "HTTP..............."

Edward Tinker · 08-18-2010, 01:13 PM

Links to dealer sites are not allowed.

I get away with it on gunboards because Simpson's is a sponsor and on this board because John has allowed it for me.

Ed

cirelaw · 08-18-2010, 01:20 PM

OK Thank You! What about non dealer sites like a reference cite?

Edward Tinker · 08-18-2010, 01:28 PM

sure, referance sites are okay

Jack Lawman · 08-18-2010, 08:17 PM

This is the web address for Jan Still's site. If you click on the link, it will take you there:

http://luger.gunboards.com/

Eric,
How I did it to follow.

cirelaw · 08-18-2010, 08:41 PM

Thank You but I'm trying to post a reply containing Jan or so other address, I can't post any adddress!

Jack Lawman · 08-18-2010, 08:45 PM

First, highlight the web address you wish to link, right click it with your mouse, then hit "copy".

Then hit the "reply to thread" button, click on the "hyperlink" button (picture of earth w/ paperclip), right click on blue text field that says "http:", then click on "paste". This will insert the address you wish to link to into your reply in clickable form.

Craft your response around the link code, and hit reply. I hope this is the answer you were looking for.

Edward Tinker · 08-19-2010, 03:58 AM

Jack, its why I told Eric, tell me what you want and I'll add it.

I would be confused by the above let alone Eric (no offense my friend)

e
d

Jack Lawman · 08-19-2010, 06:15 AM

I originally put screen capture images of what to do in my post. They have somehow disappeared. With the images, it is easier to understand.

I believe Eric's request was how to hyperlink an ongoing discussion (on this forum or any other) into a new thread on the Lugerforum. I believe he's interested in more than just a one shot link that someone can do for him (I could be wrong).

Quote:

Originally Posted by cirelaw

Thank You but I'm trying to post a reply containing Jan or so(me?)* other address, I can't post any adddress!

*parenthesis added

You know the old argument... "Give a man a fish, feed him for a day... Teach a man to fish, feed him for a lifetime."

Jack

Edward Tinker · 08-19-2010, 06:42 AM

I "think" that he just can't post url's.

and I am not sure if in his signature or any line.

One issue, which I have told him, is no longer put "this" around url's / thats old school, you used to do it like that, but no longer....

ed

cirelaw · 08-20-2010, 03:31 PM

http://landofborchardt.com A must see Luger History site. His site has been around for years and contain pictures and diagrams from the Borchardt luger the almost every type of Lugers and all the trimings. I wish I could get it in hard form. Thank You Ed for the attachment feature!

Jack Lawman · 08-20-2010, 04:25 PM

AHHH GRASSHOPPA.... I knew you could do it!

cirelaw · 08-20-2010, 05:11 PM

Thank You, A liitle knowledge is a dangerous thing!And Thank You Jack!!

Edward Tinker · 08-20-2010, 10:10 PM

I knew that was the site he'd pick too

Don M · 08-21-2010, 11:59 AM

Jack, judging from your avatar, you have found the fountain of youth.

Jack Lawman · 08-21-2010, 12:09 PM

Quote:

Originally Posted by Don M

Jack, judging from your avatar, you have found the fountain of youth.

Hey Don,
That's how I look on the inside!

Here's a more current view of the outside*:
http://glencove.patch.com/articles/s...-against-crime

*The reporter misidentified me as another guy in the unit.

08-18-2010, 10:39 AM	#1
cirelaw Lifer Lifetime Forum Patron Join Date: Dec 2003 Location: PORT ST LUCIE, FLORIDA Posts: 12,216 Thanks: 6,209 Thanked 4,133 Times in 2,173 Posts	HI ED, Erics technical question?? Often I post an issue and like to reference where it is discussed. It took me 5 years to be able to post photographs and is the procedure the same on both sites? Thank You Uncle ED!

08-18-2010, 12:25 PM	#2
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,909 Thanks: 1,986 Thanked 4,500 Times in 2,076 Posts	Yes, primarily by luck, and what is considered the best software out there. A few improvements actually on this site, John has made it easier to post much larger pictures, it self shrinks them here. The picture shown was 1.92 megabytes; this trick will not work on Jan's forum, as John did some special software changes (he is a genius when it comes to computers, seriously) HOWEVER, keep in mind that the forums EACH require logging on and you must be a member. There are many, many folks who are NOT members on both forums. Ed Attached Thumbnails __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

08-18-2010, 08:17 PM	#9
Jack Lawman User Join Date: Apr 2003 Location: Near NYC Posts: 428 Thanks: 30 Thanked 64 Times in 37 Posts	This is the web address for Jan Still's site. If you click on the link, it will take you there: http://luger.gunboards.com/ Eric, How I did it to follow. __________________ Why do you guys hate black circles so much?

08-18-2010, 08:45 PM	#11
Jack Lawman User Join Date: Apr 2003 Location: Near NYC Posts: 428 Thanks: 30 Thanked 64 Times in 37 Posts	Inserting Hyperlinks First, highlight the web address you wish to link, right click it with your mouse, then hit "copy". Then hit the "reply to thread" button, click on the "hyperlink" button (picture of earth w/ paperclip), right click on blue text field that says "http:", then click on "paste". This will insert the address you wish to link to into your reply in clickable form. Craft your response around the link code, and hit reply. I hope this is the answer you were looking for. __________________ Why do you guys hate black circles so much?

08-19-2010, 03:58 AM	#12
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,909 Thanks: 1,986 Thanked 4,500 Times in 2,076 Posts	Jack, its why I told Eric, tell me what you want and I'll add it. I would be confused by the above let alone Eric (no offense my friend) e d __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

08-18-2010, 12:31 PM	#3
cirelaw Lifer Lifetime Forum Patron Join Date: Dec 2003 Location: PORT ST LUCIE, FLORIDA Posts: 12,216 Thanks: 6,209 Thanked 4,133 Times in 2,173 Posts	Tks I need to know how to include post access to a site like You do above 'http://www.simpsonlugers.com' all you need and it brings you there.

08-18-2010, 12:34 PM	#4
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,909 Thanks: 1,986 Thanked 4,500 Times in 2,076 Posts	You mean how to have you have your own signature line? Too hard for me to write it Write me or here what you want and I will include it in both of your forum ID's ed ed_tinker@hotmail.com

08-18-2010, 01:10 PM	#5
cirelaw Lifer Lifetime Forum Patron Join Date: Dec 2003 Location: PORT ST LUCIE, FLORIDA Posts: 12,216 Thanks: 6,209 Thanked 4,133 Times in 2,173 Posts	No say Simpson is selling your book, i want to include the exact address to that exact page taking my there, Hit the exact site and page, You did it yourself!!! Started out with "HTTP..............."

08-18-2010, 01:13 PM	#6
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,909 Thanks: 1,986 Thanked 4,500 Times in 2,076 Posts	Links to dealer sites are not allowed. I get away with it on gunboards because Simpson's is a sponsor and on this board because John has allowed it for me. Ed

08-18-2010, 01:20 PM	#7
cirelaw Lifer Lifetime Forum Patron Join Date: Dec 2003 Location: PORT ST LUCIE, FLORIDA Posts: 12,216 Thanks: 6,209 Thanked 4,133 Times in 2,173 Posts	OK Thank You! What about non dealer sites like a reference cite?

08-18-2010, 01:28 PM	#8
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,909 Thanks: 1,986 Thanked 4,500 Times in 2,076 Posts	sure, referance sites are okay

08-18-2010, 08:41 PM	#10
cirelaw Lifer Lifetime Forum Patron Join Date: Dec 2003 Location: PORT ST LUCIE, FLORIDA Posts: 12,216 Thanks: 6,209 Thanked 4,133 Times in 2,173 Posts	Thank You but I'm trying to post a reply containing Jan or so other address, I can't post any adddress!

08-19-2010, 06:42 AM	#14
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,909 Thanks: 1,986 Thanked 4,500 Times in 2,076 Posts	I "think" that he just can't post url's. and I am not sure if in his signature or any line. One issue, which I have told him, is no longer put "this" around url's / thats old school, you used to do it like that, but no longer.... ed

08-20-2010, 03:31 PM	#15
cirelaw Lifer Lifetime Forum Patron Join Date: Dec 2003 Location: PORT ST LUCIE, FLORIDA Posts: 12,216 Thanks: 6,209 Thanked 4,133 Times in 2,173 Posts	http://landofborchardt.com A must see Luger History site. His site has been around for years and contain pictures and diagrams from the Borchardt luger the almost every type of Lugers and all the trimings. I wish I could get it in hard form. Thank You Ed for the attachment feature!

08-20-2010, 04:25 PM	#16
Jack Lawman User Join Date: Apr 2003 Location: Near NYC Posts: 428 Thanks: 30 Thanked 64 Times in 37 Posts	AHHH GRASSHOPPA.... I knew you could do it! __________________ Why do you guys hate black circles so much?

08-20-2010, 05:11 PM	#17
cirelaw Lifer Lifetime Forum Patron Join Date: Dec 2003 Location: PORT ST LUCIE, FLORIDA Posts: 12,216 Thanks: 6,209 Thanked 4,133 Times in 2,173 Posts	Thank You, A liitle knowledge is a dangerous thing!And Thank You Jack!!

08-20-2010, 10:10 PM	#18
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,909 Thanks: 1,986 Thanked 4,500 Times in 2,076 Posts	I knew that was the site he'd pick too

08-21-2010, 11:59 AM	#19
Don M Patron LugerForum Patron Join Date: Aug 2004 Location: Houston, TX Posts: 1,429 Thanks: 67 Thanked 292 Times in 191 Posts	Jack, judging from your avatar, you have found the fountain of youth. __________________ Regards, Don donmaus1@aol.com Author of History Writ in Steel: German Police Markings 1900-1936 http://www.historywritinsteel.com