P. 08 Luger

beaglerobert · 06-24-2002, 05:06 PM

Need Some Help Identifying This Luger, Thanx.
Toggle inscp.= 42 & last two digits of serial #
Chamber = 1939
Toggle = Squared & Knurled (clean & sharp)
Grip Saftey = no
Stock Lug = Yes (clean & Sharp)
Caliber = 9mm
Grip = Plastic, Brown, No Insig., All Checkering
clean & sharp, with border, no dings or dents in grips.
Thumb Saftey ="Safe" in rear pos. with "GESICHERT"
Markings = Last two digits of serial # is everywhere, Front of trigger housing is the full serial # and a scriptive F and a horizontal 8, Nitro proof mark under barrell (N w/crown above),
there are other markings under the barrell but I cannot make them out, seem to be partially stamped, due to curvature of barrell, Right side of Chamber there are three eagles with dots in them, and the #'s 63 below left two of the three eagles. On left side the full serial #, On left side of 1st toggle pivot there is an eagle with a circle beneath it, can't make out what markings are in circle, beneath right wing, looks like a prick punch mark.
Barrell = 4"
Left edge of Extractor = "Geladen"
Sights = (Front) blade style with tiny grooves from bottom to almost the top (clean & sharp)
(REAR) Toggle "V" with front dished out
Magazine = Bottom plugs are made out of Aluminium with the serial #'s and #'s 1 & 2, also the #'s 2/1001 are stamped in the side.
Finish = blued finish, it is almost perfect except on the grip in the back where the grip saftey would go other than that it is unmarred throught the entire gun.
Would it be advisable to shoot this gun or would it decrease the value?

06-24-2002, 05:06 PM	#1
beaglerobert User Join Date: Jun 2002 Posts: 10 Thanks: 0 Thanked 0 Times in 0 Posts	P. 08 Luger Need Some Help Identifying This Luger, Thanx. Toggle inscp.= 42 & last two digits of serial # Chamber = 1939 Toggle = Squared & Knurled (clean & sharp) Grip Saftey = no Stock Lug = Yes (clean & Sharp) Caliber = 9mm Grip = Plastic, Brown, No Insig., All Checkering clean & sharp, with border, no dings or dents in grips. Thumb Saftey ="Safe" in rear pos. with "GESICHERT" Markings = Last two digits of serial # is everywhere, Front of trigger housing is the full serial # and a scriptive F and a horizontal 8, Nitro proof mark under barrell (N w/crown above), there are other markings under the barrell but I cannot make them out, seem to be partially stamped, due to curvature of barrell, Right side of Chamber there are three eagles with dots in them, and the #'s 63 below left two of the three eagles. On left side the full serial #, On left side of 1st toggle pivot there is an eagle with a circle beneath it, can't make out what markings are in circle, beneath right wing, looks like a prick punch mark. Barrell = 4" Left edge of Extractor = "Geladen" Sights = (Front) blade style with tiny grooves from bottom to almost the top (clean & sharp) (REAR) Toggle "V" with front dished out Magazine = Bottom plugs are made out of Aluminium with the serial #'s and #'s 1 & 2, also the #'s 2/1001 are stamped in the side. Finish = blued finish, it is almost perfect except on the grip in the back where the grip saftey would go other than that it is unmarred throught the entire gun. Would it be advisable to shoot this gun or would it decrease the value?