my profile |
register |
faq |
search upload photo | donate | calendar |
07-13-2010, 10:45 AM | #21 |
Moderator
Lifetime LugerForum Patron Join Date: Oct 2002
Location: Europe
Posts: 5,053
Thanks: 1,036
Thanked 3,987 Times in 1,205 Posts
|
Marc,
Your grandfather was probably closer to the german techniques than you may realize: The basis for German norm-based engineering and production was laid by Ludwig Loewe in the late 1880s. He had a Sewing Machine factory in Berlin and went to the USA to study the American mass production techniques that came into being around the civil war. Armed with his knowledge of American mass production techniques, coupled with his own ideas on enforcing quality control he returned to Berlin and started changing his company production methods. Loewe's norm approach was the basis of the German DIN norm, and it also laid the foundations of the mass production of complex engineering designs in Germany, of which the Luger pistol is still a very good example. Loewe quickly found that there was more money in arms than in sewing machines. Sadly for Ludwig Loewe is that he died relatively young. His brother Isidor Loewe would turn the company into a larger conglomorate. Loewe stood a the cradle of DWM and owned DWM until 1928. The Loewe company was forced to merger with AEG in the late 1930s, but regained it's independance after the war. It celebrated it's 100th anniversary in 1969 and lives on as part of DIAG to this day. |
The following member says Thank You to Vlim for your post: |
07-14-2010, 06:05 AM | #22 |
User
Join Date: May 2009
Posts: 8
Thanks: 1
Thanked 1 Time in 1 Post
|
Just an observation,
But the Eurfurt appears to have no machine marks, looks like untouched casting, is this normal? is this just my eyes??? |
07-14-2010, 06:31 AM | #23 |
User
Join Date: May 2009
Posts: 8
Thanks: 1
Thanked 1 Time in 1 Post
|
Sorry, I ment untouched forging.
|
The following member says Thank You to 123 for your post: |
07-14-2010, 07:34 AM | #24 |
Moderator
Lifetime LugerForum Patron Join Date: Oct 2002
Location: Europe
Posts: 5,053
Thanks: 1,036
Thanked 3,987 Times in 1,205 Posts
|
I noticed this as well, and I was thinking that perhaps they sandblasted the interior in order to smooth out the milling marks.
|
07-14-2010, 09:36 AM | #25 |
Super Moderator - Patron
LugerForum Life Patron Join Date: Dec 2009
Location: Eastern North Carolina, USA
Posts: 3,907
Thanks: 1,374
Thanked 3,108 Times in 1,509 Posts
|
The Erfurt is so smooth and square, and the end of the area is so abrupt, I though they must have used some kind of shaving or plow tool. My Erfurt was refinished at some very early point, probably when it was reworked as a police gun (It's marked to the Magdeberg district).
The Simson shows vertical marks in this area. Marc |
07-14-2010, 01:09 PM | #26 |
Always A
Lifetime Forum Patron Join Date: Jul 2009
Location: Colorado
Posts: 2,417
Thanks: 226
Thanked 2,603 Times in 933 Posts
|
Hi Marc, As my contribution to this research, here is a photo of a 1937 Krieghoff. Regards, Norm
|
The following member says Thank You to Norme for your post: |
07-14-2010, 02:31 PM | #27 |
User
Join Date: Aug 2002
Location: Ohio
Posts: 106
Thanks: 0
Thanked 11 Times in 7 Posts
|
Later in Mauser production..... 42 BYF 7837g. Note mark in the middle somewhat different from the 1940 42 code but apparently stamped there for some reason.
__________________
dave |
The following member says Thank You to tau-delt for your post: |
07-21-2010, 09:26 PM | #28 |
Super Moderator - Patron
LugerForum Life Patron Join Date: Dec 2009
Location: Eastern North Carolina, USA
Posts: 3,907
Thanks: 1,374
Thanked 3,108 Times in 1,509 Posts
|
Norm and Dave, Thank you for your contributions.
This area, normally not externally visible, appears to be telling more about the workflow and process focus than other areas of our Lugers. It looks rougher and done more quickly when there was probably more pressure on productivity in the factories. Expedient as always, as long as the strength of the frame and adequate clearance was milled, the inspectors probably focused less on appearances here. Marc |
07-21-2010, 11:22 PM | #29 |
Lifer 2X
Lifetime Forum Patron Join Date: May 2005
Location: Somewhere in Montana
Posts: 2,630
Thanks: 3,169
Thanked 2,552 Times in 952 Posts
|
There is an excellent write up and pictures of these differences in Randall Gibson's Krieghoff book. Bill
__________________
Bill Lyon |
07-21-2010, 11:44 PM | #30 |
Super Moderator - Patron
LugerForum Life Patron Join Date: Dec 2009
Location: Eastern North Carolina, USA
Posts: 3,907
Thanks: 1,374
Thanked 3,108 Times in 1,509 Posts
|
I recently bought a copy of The Krieghoff Parabellum by Gibson. It is has a great series of comparison analysis discussions between manufacturers. These include photos of this frame area.
I hadn't seen it when I started this thread. I just noticed the differences and hoped the information was useful here... Marc |
07-23-2010, 12:12 PM | #31 |
Super Moderator - Patron
LugerForum Life Patron Join Date: Dec 2009
Location: Eastern North Carolina, USA
Posts: 3,907
Thanks: 1,374
Thanked 3,108 Times in 1,509 Posts
|
Norm, Thanks for the Krieghoff picture! Looks like they broached the inside frame edges and rear before milling the center channel.
Here's a 1936 Mauser P-08 in the "i" block: This is consistent with the process at the end of production in 1942. These look like the center channel was milled followed by the rear and side broaching. Marc |
07-26-2010, 11:16 PM | #32 |
Lifer 2X
Lifetime Forum Patron Join Date: May 2005
Location: Somewhere in Montana
Posts: 2,630
Thanks: 3,169
Thanked 2,552 Times in 952 Posts
|
Marc
Didn't mean to negate any of your study with the Gibson reference. I'm sure a lot of the collectors do not have his book. Your pictures are better anyway. Thanks Bill
__________________
Bill Lyon |
07-27-2010, 11:46 AM | #33 |
Super Moderator - Patron
LugerForum Life Patron Join Date: Dec 2009
Location: Eastern North Carolina, USA
Posts: 3,907
Thanks: 1,374
Thanked 3,108 Times in 1,509 Posts
|
Bill, no issue here... I'm just glad that I can contribute something useful!
|
01-27-2011, 05:30 PM | #34 |
Lifer
Lifetime Forum Patron Join Date: Feb 2009
Location: ...on the 'ol Erie Canal...
Posts: 8,182
Thanks: 1,400
Thanked 4,442 Times in 2,330 Posts
|
I read this thread some time back but didn't think I had anything to add...but I was looking at what I've always thought was my 'commercial' P08, particularly at the big relief area between the frame ears (which has no purpose), and I noticed that the cutter mark was odd...It looks like whoever ran the mill ran the cutter into the frame at the end of the cut...but the mark doesn't look like an end-cutting end mill...
(And although the receiver has the C/N, the frame serial is 6782/n)...
__________________
I like my coffee the way I like my women... ...Cold and bitter... |
11-23-2011, 03:50 PM | #35 | |
User
Join Date: Aug 2011
Location: England
Posts: 5
Thanks: 0
Thanked 1 Time in 1 Post
|
Quote:
http://archiveshub.ac.uk/data/gb012ms.vickers |
|
12-22-2011, 06:10 PM | #36 |
Super Moderator - Patron
LugerForum Life Patron Join Date: Dec 2009
Location: Eastern North Carolina, USA
Posts: 3,907
Thanks: 1,374
Thanked 3,108 Times in 1,509 Posts
|
Rear Frame of 1906/24 Swiss
This is the rear frame machining on my 1906/24 Swiss Luger manufactured by Waffenfabrik Bern in 1923...
__________________
Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war. |
01-18-2012, 08:32 AM | #37 |
User
Join Date: Jan 2012
Location: Macon, GA
Posts: 10
Thanks: 4
Thanked 1 Time in 1 Post
|
In reading this thread I noticed a reference to the Mauser production of the late sixties/early seventies. Perhaps you have seen the following linked article, perhaps not. I found it of some interest.
Scroll down the page to 'The Parabellum Story' and click on the page to download the article in PDF format. http://www.forgottenweapons.com/earl...loading-pistol Last edited by Ed Mc; 01-18-2012 at 08:34 AM. Reason: error correction |
07-29-2012, 11:46 AM | #38 |
Super Moderator - Patron
LugerForum Life Patron Join Date: Dec 2009
Location: Eastern North Carolina, USA
Posts: 3,907
Thanks: 1,374
Thanked 3,108 Times in 1,509 Posts
|
Mauser Interarms Luger 10.002185
Here's the milled rear receiver area of Interarms Mauser 06/29 Luger sn 10.002185. It's a .30 Luger (7.65) caliber pistol. Made in 1971.
__________________
Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war. |
The following member says Thank You to mrerick for your post: |
08-26-2012, 09:29 AM | #39 |
Super Moderator - Patron
LugerForum Life Patron Join Date: Dec 2009
Location: Eastern North Carolina, USA
Posts: 3,907
Thanks: 1,374
Thanked 3,108 Times in 1,509 Posts
|
A recently posted forum discussion included this picture of a M1900 American Eagle s/n 8372 frame rear area:
Marc
__________________
Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war. |
08-26-2012, 09:55 AM | #40 | |
Lifer
Lifetime Forum Patron Join Date: Feb 2009
Location: ...on the 'ol Erie Canal...
Posts: 8,182
Thanks: 1,400
Thanked 4,442 Times in 2,330 Posts
|
Quote:
It may be that there are digital copies available for the archives that you are intersted in, but that they are not displayed on or linked to from the Hub. You would need to contact the holding repository to find out more. Click on the link to 'Contact the repository' from the top of the description. Would you have a digital copy of this document???
__________________
I like my coffee the way I like my women... ...Cold and bitter... |
|
Tags |
dwm, erfurt, mauser, simson |
Thread Tools | |
Display Modes | |
|
|