90 grain FMJ bullet

Major Tom · 05-26-2017, 06:51 AM

Has anyone loaded Hornady's 90 grain FMJ bullet in 9mm reloads? I also reload 380 auto and sice the diameter is the same is why I ask. I have a butt load of these 90 grains. I was thinking 3.7 grains of Bullseye may be OK?

Chickenthief · 05-26-2017, 07:05 AM

Problem is COL (Cartridge Overall Length)
That bullet is tiny and has nothing (0.02") sitting in the case when loaded to proper COL 1.169"
The Luger feeding system is like the 1911, it is designed to a fixed COL and a round nosed bullet. Stray from that path and you might be in trouble.

Seated to COL 1.14" there is but 0.06" down the case and that is simply not enough.

If you try this then something like 4.8gr Bullseye is sufficient for a COL of 1" with a seating deapth of .189". If you get it to feed then shoot some film, we are many who want to see that ;-)

Chickenthief · 05-26-2017, 07:25 AM

Here are the dimensions like Georg Luger intended them:

http://home.scarlet.be/p.colmant/polte9.htm

Chickenthief · 05-26-2017, 07:28 AM

For those struggling with metric here is a neat little tool:

http://wscope.com/convert.htm

DonVoigt · 05-26-2017, 08:46 AM

I doubt they would function the action reliably, even if they would feed.
Would make your luger a single loader, single shot plinker - I would think.

Just shoot your .380 more!

Sieger · 12-13-2017, 12:18 AM

Quote:

Originally Posted by Chickenthief

Here are the dimensions like Georg Luger intended them:

http://home.scarlet.be/p.colmant/polte9.htm

Hi,

Sorry, but not quite for Luger shooting!

Please note that steel case ammo was not intended for pistol shooting by the Germans during WWII.

Your excellent original German source is dated from 1940, 32 years after German Army adoption of the Luger.

Confusing, I know, especially to non German speakers.

Sieger

05-26-2017, 06:51 AM	#1
Major Tom User Join Date: Jan 2017 Location: S.E. Iowa Posts: 481 Thanks: 531 Thanked 226 Times in 123 Posts	90 grain FMJ bullet Has anyone loaded Hornady's 90 grain FMJ bullet in 9mm reloads? I also reload 380 auto and sice the diameter is the same is why I ask. I have a butt load of these 90 grains. I was thinking 3.7 grains of Bullseye may be OK? __________________ I Build Custom Pistol Boxes

05-26-2017, 07:25 AM	#3
Chickenthief User Join Date: Dec 2016 Location: Denmark Posts: 135 Thanks: 0 Thanked 131 Times in 48 Posts	Here are the dimensions like Georg Luger intended them: http://home.scarlet.be/p.colmant/polte9.htm Attached Thumbnails

05-26-2017, 08:46 AM	#5
DonVoigt User Join Date: Apr 2015 Location: near Charlotte NC Posts: 4,677 Thanks: 1,439 Thanked 4,347 Times in 2,038 Posts	I doubt they would function the action reliably, even if they would feed. Would make your luger a single loader, single shot plinker - I would think. Just shoot your .380 more! __________________ 03man(Don Voigt); Luger student and collector. Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie

05-26-2017, 07:05 AM	#2
Chickenthief User Join Date: Dec 2016 Location: Denmark Posts: 135 Thanks: 0 Thanked 131 Times in 48 Posts	Problem is COL (Cartridge Overall Length) That bullet is tiny and has nothing (0.02") sitting in the case when loaded to proper COL 1.169" The Luger feeding system is like the 1911, it is designed to a fixed COL and a round nosed bullet. Stray from that path and you might be in trouble. Seated to COL 1.14" there is but 0.06" down the case and that is simply not enough. If you try this then something like 4.8gr Bullseye is sufficient for a COL of 1" with a seating deapth of .189". If you get it to feed then shoot some film, we are many who want to see that ;-)

05-26-2017, 07:28 AM	#4
Chickenthief User Join Date: Dec 2016 Location: Denmark Posts: 135 Thanks: 0 Thanked 131 Times in 48 Posts	For those struggling with metric here is a neat little tool: http://wscope.com/convert.htm