my profile |
register |
faq |
search upload photo | donate | calendar |
02-18-2011, 11:45 PM | #1 |
User
Join Date: Jan 2009
Posts: 9
Thanks: 1
Thanked 0 Times in 0 Posts
|
S/42 with alloy frame?
I've found a 9mm Mauser S/42 with steel slide and a flat/non-glossy (aluminum?) alloy frame. Serial numbers on frame and slide are 394277; barrel/slide marked with letter "G," 69, and S/42; also has markings 11/154, S92, and an eagle proof mark. Is this gun a fake -- perhaps a genuine slide/barrel fitted to a frame handmade by some skilled gunsmith (of which there are plenty here in the Philippines)?
|
02-19-2011, 12:22 AM | #2 |
Patron
LugerForum Patron Join Date: Nov 2008
Posts: 4,047
Thanks: 578
Thanked 1,414 Times in 887 Posts
|
Need to see a lot of pictures, for our own curiosity at least. Is the frame magnetic?
dju |
02-19-2011, 03:41 AM | #3 |
User
Join Date: Jun 2002
Location: San Mateo, California
Posts: 1,432
Thanks: 2
Thanked 71 Times in 56 Posts
|
The serial number is way out of the highest original commercial number and probably is a made up gun. As David says, we need photos.
|
02-19-2011, 04:44 AM | #4 |
User
Join Date: Jan 2009
Posts: 9
Thanks: 1
Thanked 0 Times in 0 Posts
|
Thanks; owner's agent (I'm getting this all second-hand) now says frame is indeed steel, but was refinished with a brushed nickel plating that makes it look like some kind of alloy. I've seen a number of valuable antique pistols refinished in that manner here, so that makes sense. (Of course it greatly reduces their value.) Serial number still sounds mighty fishy, though -- any thoughts about that? Not sure how to post photos (I have four rather poor-quality photos -- apparently taken by cellphone); I get a prompt for a URL/website.
|
02-19-2011, 11:04 AM | #5 |
User
Join Date: Mar 2008
Location: Marco Island, Florida
Posts: 4,867
Thanks: 1,685
Thanked 1,916 Times in 1,192 Posts
|
This sounds like what is actually being described is a post war P38, or P1
|
02-19-2011, 09:02 PM | #6 |
User
Join Date: Aug 2009
Location: CA, USA
Posts: 62
Thanks: 4
Thanked 2 Times in 2 Posts
|
I was thinking a G Date upper... "11/154, S92" may actually be W 154 S92 ?
__________________
I'm looking for a D suffix DE154 G Date mag. The closer to #457d the better PM me if you have one you are willing to sell, trade, or if you have a lead |
02-20-2011, 08:53 AM | #7 |
Banned
Join Date: Feb 2011
Posts: 16
Thanks: 0
Thanked 0 Times in 0 Posts
|
I would love to see this frame? Is it possible you can post a few pictures of it on here. Or send to my e-mail??
|
02-20-2011, 11:04 AM | #8 |
Lifer
Lifetime Forum Patron Join Date: Feb 2009
Location: ...on the 'ol Erie Canal...
Posts: 8,183
Thanks: 1,400
Thanked 4,442 Times in 2,330 Posts
|
Are you sure it's 9mm??? Some of the .22 "Lugers" have zinc frames...
I've also noticed that some of the 'replica' Lugers offered on eBay are metal; most likely zinc...
__________________
I like my coffee the way I like my women... ...Cold and bitter... |
02-21-2011, 02:08 AM | #9 |
User
Join Date: Jul 2002
Location: Orange County,CA
Posts: 27
Thanks: 7
Thanked 1 Time in 1 Post
|
ugh, I hope the filipino didn't chrome it or add shiny stuff, it sickens me to see new cars with ugly shiny trinkets glued to it...here in CA it happen alot and yes , filipino loves guns
|
02-26-2011, 08:35 PM | #10 |
User
Join Date: Jan 2009
Posts: 9
Thanks: 1
Thanked 0 Times in 0 Posts
|
Turns out frame is actually steel, but weird brushed-nickel finish led my scout/agent/"bird-dog" to conclude incorrectly that it was some kind of alloy. Kudos to EricW; markings I described near the front/barrel on right side of chamber are indeed W154 and S92, followed by a stylized tiny eagle. I very much suspect the serial number (394277, on left side of chamber, and on front of frame, above triggerguard) is fake, since parts of toggle, sear safety, etc. are all marked 69, which must have been last two digits of original serial number. (By the way, there appears to be a sort of stylized script letter "a" just below serial number on front of frame.) Here's my question to you Luger gurus... if I take this pistol apart, is there anywhere else on/in the pistol where entire original serial number could be found (since 394277 on chamber and frame is apparently wrong)?
(I suppose one alternative is that perhaps it was made up from two pistols, one that had a frame and chamber numbered 394277, with toggle and many/most internal parts from a second pistol that had a serial number ending in 69. ...But if that were the case, what would explain the "G" on top of the chamber -- which could never have been on a pistol with a six-digit serial number?) |
02-26-2011, 09:26 PM | #11 |
User
Join Date: Jun 2002
Location: San Mateo, California
Posts: 1,432
Thanks: 2
Thanked 71 Times in 56 Posts
|
Philip, no original luger ever left the factory with a six digit serial number. That #394277 has to be a fantasy stamping. The frame is probably not part of the original luger so the only other place the full original serial number would have been stamped is under the barrel close to where it is screwed into the frame, providing of course, the barrel is original. The "G", as I'm sure you know, was a Mauser code for 1935. It would be nice to clear this situation up once and for all by getting and posting some clear photographs.
|
02-27-2011, 06:40 AM | #12 |
User
Join Date: Jan 2009
Posts: 9
Thanks: 1
Thanked 0 Times in 0 Posts
|
I'll do the best I can with my little Sony Cyber-Shot (it's not very good for closeups), but how can I post them here? (When I ask to post photos, the website asks for an Internet address.)
|
02-27-2011, 06:53 AM | #13 |
User
Join Date: Jan 2009
Posts: 9
Thanks: 1
Thanked 0 Times in 0 Posts
|
Allow me to repeat my question: apparently-fake serial number 394277 is on left side of chamber and above triggerguard at front of frame; for reasons known only to God, owner thinks original/true serial number "might be" 9169. In addition to left side of chamber and at front of frame under barrel, is the complete, original serial number available anywhere inside the pistol?
|
02-27-2011, 08:15 AM | #14 |
User
Join Date: Aug 2009
Location: CA, USA
Posts: 62
Thanks: 4
Thanked 2 Times in 2 Posts
|
Just the last 2 digits elsewhere on the gun parts. The only other place the full serial number appears is on the original magazine bottoms. It would have been up to 4 digits with the script "a" suffix below the serial, a "+" on the second (spare) magazine, and the droop wing eagle (DE) 154 proof.
To post your photos, click on "go advanced" then click the paper clip icon and use the pop up window to browse and upload your photos.
__________________
I'm looking for a D suffix DE154 G Date mag. The closer to #457d the better PM me if you have one you are willing to sell, trade, or if you have a lead |
02-28-2011, 06:21 AM | #15 |
User
Join Date: Jan 2009
Posts: 9
Thanks: 1
Thanked 0 Times in 0 Posts
|
S/42 "G" Luger
Photos of (supposed) S/42 "G" Luger -- pistol may be a fake.
|
02-28-2011, 08:09 AM | #16 |
Moderator
Lifetime LugerForum Patron Join Date: Oct 2002
Location: Europe
Posts: 5,053
Thanks: 1,036
Thanked 3,989 Times in 1,205 Posts
|
This one screams for a restoration. The serial number has been altered without doubt. You can see that quite some material was removed from the front of the frame, where the new 'fantasy' number has been applied.
|
02-28-2011, 09:55 AM | #17 |
Lifer
Lifetime Forum Patron Join Date: Jun 2002
Location: The Capital of the Free World
Posts: 10,154
Thanks: 3,003
Thanked 2,306 Times in 1,097 Posts
|
Without a legitimate paper trail, the possession of this firearm in the USA would be a federal offense. I would advise all parties to stay away from this Luger. The original serial number on the frame in front of the trigger guard has not only been "defaced" within the definition used by the Bureau of Alcohol, Tobacco, Firearms and Explosives (BATFE), but has been completely replaced by a non-original number...
The only way this can happen is to have BATFE written authorization to replace the serial number... without this piece of paper, you have no idea how the serial number was altered or why... This gun could have easily been used in a crime. Be afraid... be very afraid...and stay away from this gun.
__________________
regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL and are endowed by their Creator with certain UNALIENABLE rights, and among these are life, LIBERTY, and the pursuit of happiness..." |
The following member says Thank You to John Sabato for your post: |
02-28-2011, 08:14 PM | #18 |
User
Join Date: Jan 2009
Posts: 9
Thanks: 1
Thanked 0 Times in 0 Posts
|
Thanks for the good advice, Mr. Sabato; this Luger (if indeed it's even a real Luger -- lots of fake firearms are made here in artisanal workshops) sounds like a can of worms to steer clear of, and I'm going to advise my friend who found it to do the same. The whole thing's just too fishy/dicey/"dodgy".
|
02-28-2011, 08:38 PM | #19 |
User
Join Date: Jul 2002
Location: Orange County,CA
Posts: 27
Thanks: 7
Thanked 1 Time in 1 Post
|
Looks like "942" as part of the orig serial, the "3 & at least one 7" as also added
|
Tags |
alloy frame, s/42 |
Thread Tools | |
Display Modes | |
|
|