Firing Problem Very new to lugers

jws4621 · 04-11-2009, 08:44 PM

Hi...

Went to try my luger out for the first time today... I had not striped at all other than opening it up and checking it out to make sure there were no major problems with it... Well got there and it would not do anything when I pulled the trigger. So I looked around on here and found out how to pull it apart and found the pin that holds the side plate to the not sure what it is called just kinda fell out you can see in the pics.. I need to know what it is called and where to get it. and if you see anything else I might need to know feel free.

Thanks Alot you guys are great.

Jonathan

I guess I should have taken a picture of it before I took it apart.

policeluger · 04-11-2009, 09:57 PM

The pin you have picture, trigger lever retaining pin, is damaged and needs replacing.....contact Luger Doc, Tom Heller for the part....see link to left of screen "links and resources".....easy to replace.....let us know if we can help

Lugerdoc · 04-12-2009, 02:50 PM

I do have trigger lever pins instock: original @$10 or new repros @$5 + $3 S&H. TH

04-11-2009, 08:44 PM	#1
jws4621 User Join Date: Aug 2008 Posts: 9 Thanks: 2 Thanked 0 Times in 0 Posts	Firing Problem Very new to lugers Hi... Went to try my luger out for the first time today... I had not striped at all other than opening it up and checking it out to make sure there were no major problems with it... Well got there and it would not do anything when I pulled the trigger. So I looked around on here and found out how to pull it apart and found the pin that holds the side plate to the not sure what it is called just kinda fell out you can see in the pics.. I need to know what it is called and where to get it. and if you see anything else I might need to know feel free. Thanks Alot you guys are great. Jonathan I guess I should have taken a picture of it before I took it apart.

04-12-2009, 02:50 PM	#3
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 736 Times in 483 Posts	I do have trigger lever pins instock: original @$10 or new repros @$5 + $3 S&H. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

04-11-2009, 09:57 PM	#2
policeluger RIP Join Date: Jun 2002 Location: Ca. Posts: 2,141 Thanks: 8 Thanked 89 Times in 54 Posts	The pin you have picture, trigger lever retaining pin, is damaged and needs replacing.....contact Luger Doc, Tom Heller for the part....see link to left of screen "links and resources".....easy to replace.....let us know if we can help