30 luger snap-cap / best snap caps ?

lfid · 12-14-2008, 02:25 PM

Anyone know of a source for 30 luger snap-cap or other dry fire method ?

also - re the crop of 9mm snap-caps , any suggested preferences ?

thanks
Bill

alterfritz · 12-18-2008, 05:52 PM

I asked the same question recently here and I was refered to this site: http://www.pistoleer.com/azoom/pistol/
These are 9mm, can't say about the .30 though

I can't say anything about the quality yet since my order is still underway, but the people here in the forum said these were good snap caps to use.

jonnyc · 12-18-2008, 06:28 PM

I've had some problems with A-Zoom 9mms, slightly too long and jam in the chamber throat. I have never seen any commercial 7.65mm Luger snap-caps.

Vlim · 12-19-2008, 09:23 AM

Take an empty case, remove the (used) primer and glue a piece of rubber (eraser) in the recess. Stick a round in the case, give it a distinct color just to be able to see it's a snap cap and you're good to go.

unspellable · 12-19-2008, 07:16 PM

I've used a bit of epoxy in the primer pocket rather than an eraser. Lasts longer and still soft enough to cushion the firing pin.

Vlim · 12-19-2008, 07:29 PM

Good idea. That got me thinking. How about a snap cap with a small bell mechanism inside?
Would be nice to hear the gun do a soft 'ping' every time you pull the trigger

lfid · 12-20-2008, 02:59 AM

Guys .

thanks for the ideas !!!
Bill

Steve Richards · 12-25-2008, 01:06 AM

I have this brand of snap cap in several calibers and have not had any probles. I just would like to find snap caps in 7.65X53 Mauser (AKA 7.65 Argentine or 7.65 Belgium) and also the .30 LUger.

Steve

12-14-2008, 02:25 PM	#1
lfid Lifer Lifetime Forum Patron Join Date: Sep 2006 Location: Wichita, KS USA Posts: 453 Thanks: 573 Thanked 96 Times in 53 Posts	30 luger snap-cap / best snap caps ? Anyone know of a source for 30 luger snap-cap or other dry fire method ? also - re the crop of 9mm snap-caps , any suggested preferences ? thanks Bill

12-18-2008, 05:52 PM	#2
alterfritz User Join Date: Nov 2008 Location: California Posts: 63 Thanks: 3 Thanked 3 Times in 3 Posts	I asked the same question recently here and I was refered to this site: http://www.pistoleer.com/azoom/pistol/ These are 9mm, can't say about the .30 though I can't say anything about the quality yet since my order is still underway, but the people here in the forum said these were good snap caps to use.

12-18-2008, 06:28 PM	#3
jonnyc User Join Date: Dec 2008 Posts: 425 Thanks: 2 Thanked 46 Times in 34 Posts	I've had some problems with A-Zoom 9mms, slightly too long and jam in the chamber throat. I have never seen any commercial 7.65mm Luger snap-caps.

12-19-2008, 09:23 AM	#4
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,032 Thanks: 1,018 Thanked 3,873 Times in 1,184 Posts	Take an empty case, remove the (used) primer and glue a piece of rubber (eraser) in the recess. Stick a round in the case, give it a distinct color just to be able to see it's a snap cap and you're good to go.

12-19-2008, 07:16 PM	#5
unspellable User Join Date: Jun 2002 Location: Iowa Posts: 768 Thanks: 0 Thanked 18 Times in 10 Posts	I've used a bit of epoxy in the primer pocket rather than an eraser. Lasts longer and still soft enough to cushion the firing pin.

12-19-2008, 07:29 PM	#6
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,032 Thanks: 1,018 Thanked 3,873 Times in 1,184 Posts	Good idea. That got me thinking. How about a snap cap with a small bell mechanism inside? Would be nice to hear the gun do a soft 'ping' every time you pull the trigger

12-20-2008, 02:59 AM	#7
lfid Lifer Lifetime Forum Patron Join Date: Sep 2006 Location: Wichita, KS USA Posts: 453 Thanks: 573 Thanked 96 Times in 53 Posts	Guys . thanks for the ideas !!! Bill

12-25-2008, 01:06 AM	#8
Steve Richards User Join Date: Jun 2002 Location: Beaverton, Oregon Posts: 487 Thanks: 0 Thanked 0 Times in 0 Posts	I have this brand of snap cap in several calibers and have not had any probles. I just would like to find snap caps in 7.65X53 Mauser (AKA 7.65 Argentine or 7.65 Belgium) and also the .30 LUger. Steve