Another cause for Failure to Extract

Margana · 01-08-2009, 10:34 PM

I have an Erfurt 1918 and not uncommonly, it will fail to extract the fired brass, resulting in a "stove pipe" jam. Sometimes it would fire a string just fine and other times, every other shot would jam. I tried a variety of things (different loadings, different magazines). Anyway, I decided to remove the ejector to inspect it (although the tip seemed fine-not broken). I discovered the problem! The ejector was not fully seated to the slide! Once the part was properly locked in place, the Erfurt functions flawlessly.....

Rich Moran · 04-18-2009, 06:44 AM

Thanks for that tip, wonder if that contributes to same issue in S/42 36 model?

MFC · 04-19-2009, 02:25 AM

The specs of the ejectors is the same for both models

01-08-2009, 10:34 PM	#1
Margana User Join Date: Oct 2008 Location: Portland, OR Metro Posts: 10 Thanks: 0 Thanked 1 Time in 1 Post	Another cause for Failure to Extract I have an Erfurt 1918 and not uncommonly, it will fail to extract the fired brass, resulting in a "stove pipe" jam. Sometimes it would fire a string just fine and other times, every other shot would jam. I tried a variety of things (different loadings, different magazines). Anyway, I decided to remove the ejector to inspect it (although the tip seemed fine-not broken). I discovered the problem! The ejector was not fully seated to the slide! Once the part was properly locked in place, the Erfurt functions flawlessly.....

04-18-2009, 06:44 AM	#2
Rich Moran New User Join Date: Apr 2005 Location: Hawaii Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	Thanks for that tip, wonder if that contributes to same issue in S/42 36 model? __________________ Honolulu Rich

04-19-2009, 02:25 AM	#3
MFC User Join Date: Sep 2006 Location: Louisiana Posts: 1,237 Thanks: 183 Thanked 281 Times in 162 Posts	The specs of the ejectors is the same for both models __________________ Mike C.