my profile |
register |
faq |
search upload photo | donate | calendar |
08-06-2014, 07:40 PM | #1 |
User
Join Date: Mar 2014
Location: Concord, NC
Posts: 34
Thanks: 66
Thanked 25 Times in 14 Posts
|
Commercial Magazines for P08 available
My lucky day. Been looking for some reliable replacement magazines for my shooters and have purchased several off eBay and also from triple k. I like the 3K, particularly the nickel with the wood bottom. But, these magazines would not reliably engage the last round hold-open. I've heard the Mec-Gar P08 magazines were good so after a bidding war on eBay and the price went over $52.00, I quit bidding. I've been cruising the net for weeks and everybody was out of stock on the Mec-Gars. When I happened on Greg Cote's web page (Saint Johns, FL), his MGLUGP08B (the search term I was using) when to the cart. Well, this happens a lot only to be advised that they are out of stock. Some companies let you pay and then send you an email the next day that they are on backorder. I ordered them on Monday, and two arrived in my mailbox today (Wednesday) @27.95 each. I am enthralled by the larger button which adds just enough extra pressure on the hold open device to firmly activate it. The mags have round springs and are appropriately stiff and handle 8 rounds. I highly recommend these if you are looking for same. http://www.gregcotellc.com/cart/inde...roducts_id=600
|
The following 3 members says Thank You to GreyHammer for your post: |
08-06-2014, 07:49 PM | #2 |
Super Moderator
Eternal Lifer LugerForum Patron Join Date: Jun 2002
Location: North of Spokane, WA
Posts: 15,927
Thanks: 2,026
Thanked 4,525 Times in 2,090 Posts
|
he must have bought them a long time ago, as I will buy them at shows any chance I get for less than $30
I checked into buying some enmass and they told me I had to order a 1,000 of them....
__________________
Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV |
The following 2 members says Thank You to Edward Tinker for your post: |
10-10-2014, 10:25 AM | #3 |
User
Join Date: Nov 2009
Location: NC
Posts: 37
Thanks: 16
Thanked 3 Times in 2 Posts
|
I followed greyhammer's post and the mags came in two days. I bought them because they have circled wood pulls. They are brown and have Metgar printed on them but look perfect in my Navy lugers. They perform perfectly. Not exactly right but Navy mags are like hen;s teeth Lewis Fifer
|
10-10-2014, 03:24 PM | #4 |
Patron
LugerForum Patron Join Date: Mar 2011
Location: Az.
Posts: 2,289
Thanks: 2,704
Thanked 971 Times in 716 Posts
|
I have a fair number of Mec-Gar luger mags. None of them have a wood base. I just checked Greg's web site, and both of the Luger mags that he has for sale have a plastic, not wood, base. Are you sure that your mags have a wood base?
|
The following member says Thank You to rhuff for your post: |
10-10-2014, 04:00 PM | #5 |
User
Join Date: Sep 2014
Location: Mt. Vernon VA
Posts: 244
Thanks: 1,424
Thanked 117 Times in 75 Posts
|
If you can get any Luger mag for $30 or less, it is a good buy. You can also get repro wooden bases and pull out the plastic base and put the wood in, but this is difficult to do without leaving tool marks. The trouble with any base, is that it should be made with a punch pin, or maybe set screws, so it can be removed for cleaning.
|
10-10-2014, 06:32 PM | #6 |
Patron
LugerForum Patron Join Date: Jun 2002
Location: POB 398 St.Charles,MO. 63302
Posts: 5,089
Thanks: 6
Thanked 736 Times in 483 Posts
|
I still have a few new Mecgar mags available. See my ad in the For Sale section. If you also want any type (including concentric circle Navy type) wood bottoms installed, contact GT in the vendor section. If you prefer to install one yourself, I also stock all types of his wood bottoms, but don't care to install them. TH
|
10-13-2014, 03:53 PM | #7 |
User
Join Date: Nov 2009
Location: NC
Posts: 37
Thanks: 16
Thanked 3 Times in 2 Posts
|
I think you are right. I was so enthralled by the black concentric pulls that I quit reading right there and ordered two However I will keep these untill something better comes along. Thanks for the heads up. Lewis Fifer
|
10-13-2014, 05:57 PM | #8 |
Patron
LugerForum Patron Join Date: Mar 2011
Location: Az.
Posts: 2,289
Thanks: 2,704
Thanked 971 Times in 716 Posts
|
If you want your Mec-Gar mags to have concentric wood bases like the original Navy lugers, our own GT here on the forum can make the change for you. He did one for me and it turned out perfect. Just a thought.
|
10-13-2014, 07:26 PM | #9 |
User
Join Date: Mar 2014
Location: Concord, NC
Posts: 34
Thanks: 66
Thanked 25 Times in 14 Posts
|
I buy the ww2 repo P08 Luger magazine bottoms off eBay for less than 15 bucks, including shipping from the UK. Very easy to replace, but you do need a punch and drill bit (3/32). I also use a 3/32 starter punch which holds the pin steady when starting. Also useful to have a small vise which I use a piece of plastic to help minimize any scratches. Push out the pins, set the spring and follower aside, insert the new wood mag base and drill the holds using the magazine as a template. Re-insert the spring, follower and new mag base. I use two punches, one to align the holes, and the starter punch to insert the first retaining pin, then the second. The vise is very useful at this point. I gently squeeze the area where the pins are to push them in flush. This helps avoid scratching the magazine with a punch. Five minutes and you are done creating a much improved look for the lower frame on your P08.
|
10-13-2014, 07:43 PM | #10 |
User
Join Date: Mar 2014
Location: Concord, NC
Posts: 34
Thanks: 66
Thanked 25 Times in 14 Posts
|
Sorry for the lack of clarity: it's the Triple-K magazines that have the wood bases, not the Mec-Gar. The 3-K does not actuate the hold-open on my 1923 commercial DWM as well as the Mec-Gar due to the slightly smaller button. The Triple-K works well in my other lugers, though.
Last edited by GreyHammer; 10-13-2014 at 10:01 PM. |
|
|