LugerForum Discussion Forums my profile | register | faq | search
upload photo | donate | calendar

Go Back   LugerForum Discussion Forums > Luger Discussion Forums > Lugerforum Archive

 
Thread Tools Display Modes
Unread 05-08-2002, 06:06 PM   #1
JDH
New User
 
Join Date: Jun 2002
Location: Washington State
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default 1918 Erfurt value?

I've been offered a 1918 dated Erfurt with 95% original blue and 80% straw. It's all matching, with the exception of the nickle plated aluminum base mag. The bore and the grips are in excellent condition. It also comes with a '42 dated holster in excellent condition. I've not seen the pistol but if it's in the condition listed, would $800 be a realistic price? High? Low? Desirable piece? Thanx for your help.

Regards,

JDH



JDH is offline  
Unread 05-08-2002, 06:15 PM   #2
Brandon Metcalf
Guest
 
Posts: n/a
Default Re: 1918 Erfurt value?

I would pay that for it if the condition was as listed (not to mention the extra goodies). It's a pretty common WWI peice. We have been discussing Erfurts lately so you might want to scroll down and have a look. I would get some advice from some of the experts here at the forum (One of which I am not)! But I would buy it if it's as listed!


Hope This Helps!,Brandon



 
Unread 05-08-2002, 06:23 PM   #3
Lonnie Zimmerman
User
 
Join Date: Jun 2002
Posts: 523
Thanks: 0
Thanked 1 Time in 1 Post
Default Re: 1918 Erfurt value?

If it is as listed, it is a bargain!!


Lonnie



Lonnie Zimmerman is offline  
Unread 05-08-2002, 06:48 PM   #4
tom collins
Guest
 
Posts: n/a
Default Re: 1918 Erfurt value?

you'd be lucky to get it under $1000. all matching at 90% with holster will run it up there.



 
Unread 05-08-2002, 08:50 PM   #5
tom
User
 
Join Date: Jun 2002
Posts: 269
Thanks: 0
Thanked 4 Times in 2 Posts
Default Re: 1918 Erfurt value?

Hi JDH,


The *critical* component in this all matching Erfurt is, believe it or not, the grip screws. Erfurt grip screws were proofed on the exterior rounded surface parallel to the screw driver slot. If the grip screws ain't proofed, the gun is not matching and it becomes a garden variety Erfurt.


The good news is that at $ 550 or so, which is what the piece costs when you back out the holster and mag, its still a pretty attractive offer.


Hope this helps,


Tom



tom is offline  
Unread 05-08-2002, 08:51 PM   #6
Roadkill
User
 
Join Date: Jun 2002
Posts: 1,632
Thanks: 1
Thanked 28 Times in 17 Posts
Default Re: 1918 Erfurt value?

If you don't want it send it my way. I paid $625 for a 1918 Erfurt, non matching, non import, no holster, decent ++ condition, took a lot of work to get it to shoot at all, I've probably got $725 in it counting a repo holster.


RK



Roadkill is offline  
Unread 05-08-2002, 08:55 PM   #7
Roadkill
User
 
Join Date: Jun 2002
Posts: 1,632
Thanks: 1
Thanked 28 Times in 17 Posts
Default Re: 1918 Erfurt value?

Grip screws proofed? That's a new one for me. I know you are serious about collecting or there would be a question in my mind. Are Erfurts the only ones? Let me know what the proofs look like.


RK



Roadkill is offline  
Unread 05-08-2002, 09:00 PM   #8
tom
User
 
Join Date: Jun 2002
Posts: 269
Thanks: 0
Thanked 4 Times in 2 Posts
Default Re: 1918 Erfurt value?

The *correct, matching* grip screws for ALL Erfurt pieces is a Gothic W (Wilhelm) with a surmounted crown. If these ain't there, your Erfurt is not a matching gun...and most AIN'T there.


Tom



tom is offline  
Unread 05-08-2002, 09:14 PM   #9
Roadkill
User
 
Join Date: Jun 2002
Posts: 1,632
Thanks: 1
Thanked 28 Times in 17 Posts
Default Re: 1918 Erfurt value?

Thanks, as time goes on I feel the need to leave the collecting to folks like you and stay in the shooter arena. Too many ways to go wrong. One of the biggest things I see consistently is that most dealers either are not informed about Lugers or are purposely misleading in their sales advertisements. Mr John Smith at pawnshop AAA in Redbank Ala has no idea how to disassemble & verify what he will call "matching" when he puts it up on GA or AA or in the paper. Are Erfurts the only ones so marked?


RK


RK



Roadkill is offline  
Unread 05-08-2002, 09:20 PM   #10
tom collins
Guest
 
Posts: n/a
Default screwed or not screwed...

someone out there is willing to pay $1000 plus for that all matching, 90% plus original erfurt and holster....with or without the matched screws. trust me.



 
Unread 05-08-2002, 09:25 PM   #11
Johnny Peppers
User
 
Join Date: Jun 2002
Location: Calion, Arkansas
Posts: 1,042
Thanks: 0
Thanked 1 Time in 1 Post
Default Re: screwed or not screwed...

The scan doesn't show the grip screw good enough to make out the inspection stamp, but you get the idea.




http://boards.rennlist.com/upload/Erfurt.jpg
Johnny Peppers is offline  
Unread 05-08-2002, 09:30 PM   #12
John D.
Administrator
& Site Owner
LugerForum
Patron
 
Join Date: Jun 2002
Location: A Little NE of Somewhere...
Posts: 2,650
Thanks: 470
Thanked 513 Times in 127 Posts
Default Re: 1918 Erfurt value?

Yea - Erfurts were the only ones with grip screws that were so marked.


As for collecting vs. shooting - hmmmm... Find a variation that you want to focus on - then read, read some more, read a little more, then research (yes - actually "research" ) and ask a lot of questions. There are still a lot of "gems" out there waiting to be discovered by the collector.... It's an interesting time in Luger collecting, as many original VET Lugers are showing up, offered by the surviving families and their estates.


Just MHO....





John D. is offline  
Unread 05-08-2002, 09:45 PM   #13
Roadkill
User
 
Join Date: Jun 2002
Posts: 1,632
Thanks: 1
Thanked 28 Times in 17 Posts
Default Re: screwed or not screwed...

Its amazing to me that there are mint, ALL matching w/2 magazines and holster pre WWI,WWI, Interim, & WWII Lugers out there after two World Wars and 10,000 people swapping parts on them. Collectors, you must be either focused to the degree of a laser in your diligence or completely out of your heads in this non ending search for the holy grail. I understand your lack of tolerance for parts doctors.


RK



Roadkill is offline  
Unread 05-08-2002, 10:11 PM   #14
Greg
User
 
Join Date: Jun 2002
Location: Southern U.S.
Posts: 181
Thanks: 0
Thanked 1 Time in 1 Post
Default Re: 1918 Erfurt value?

Simson's also have their distinctive proofs on the screws.



Greg is offline  
The following member says Thank You to Greg for your post:
Unread 05-08-2002, 10:12 PM   #15
Ron Wood
Moderator
2010 LugerForum
Patron
 
Ron Wood's Avatar
 
Join Date: Jun 2002
Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso
Posts: 6,985
Thanks: 1,059
Thanked 5,082 Times in 1,673 Posts
Default Re: 1918 Erfurt value?

Probably shouldn't wade in on this one...but. Not having proofed grip screws does not reduce and otherwise matching Erfurt to "garden variety". Come on guys, these are warhorses. A nice matching Erfurt with replaced grip screws might,and I emphasize might,reduce the price by $20 or so IMO. Would you pass up a bargan on a new car because the floor mats were dirty?



Ron Wood is offline  
The following member says Thank You to Ron Wood for your post:
Unread 05-08-2002, 10:15 PM   #16
John D.
Administrator
& Site Owner
LugerForum
Patron
 
Join Date: Jun 2002
Location: A Little NE of Somewhere...
Posts: 2,650
Thanks: 470
Thanked 513 Times in 127 Posts
Default Re: 1918 Erfurt value?

You are right - I forgot all about those..!!! Sorry about that (can you tell I don't have any Simson Lugers?? )..


Great catch!



John D. is offline  
Unread 05-08-2002, 11:37 PM   #17
Lonnie Zimmerman
User
 
Join Date: Jun 2002
Posts: 523
Thanks: 0
Thanked 1 Time in 1 Post
Default Re: 1918 Erfurt value?

I believe a lot of the 1917-18 Erfurts did not have the grip screws proofed.


Lonnie



Lonnie Zimmerman is offline  
Unread 05-08-2002, 11:50 PM   #18
Aaron
Banned
 
Join Date: Jun 2002
Location: Vista, CA
Posts: 1,008
Thanks: 0
Thanked 9 Times in 9 Posts
Default I agree with Lonnie

My 99% 1917 Erfurt rig with TWO MATCHING MAGS, near mint brown holster and proofed tool is proofed in every conceivable place except the grip screws.



Aaron is offline  
Unread 05-09-2002, 07:47 AM   #19
Marvin
User
 
Join Date: Jun 2002
Location: Upstate S.C.
Posts: 1,132
Thanks: 0
Thanked 0 Times in 0 Posts
Default Re: 1918 Erfurt value?

What John said is so right; that if a person is going to collect Lugers, they should concentrate on one type, and READ anyhthing they can find on that variety! There are so many variations, time period variations, police, military, navy, etc. it is almost impossible to keep up with them all.


I try to stay with the WWI pistols, but I have recently gotten interested in the Weimar Police Lugers. I have a couple, but still need to read more and learn from others on this Forum that know more than I do.


Being armed with knowledge, you won't get taken. I also stay with the more common Lugers; the rare stuff is the ones you can get taken on very quick unless you know what you are doing. Just an opinion.


Marvin



AMMOMAN
Marvin is offline  
Unread 05-09-2002, 09:35 AM   #20
Tom Heller
Guest
 
Posts: n/a
Default Re: Proofed grip screws

Most Erfurt PO8s prior to 1917 with have the crown over a letter INSPECTORS mark on the grip screws that you find on all other Erfurt parts. This pratice will discontinued sometime around 1917. Most all Simson PO8s will also have the E/6 or E/33 inspectors markings on their grip screws. Tom h



 
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:05 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2023, Lugerforum.com