My first Luger!

bigdinla · 06-04-2011, 05:01 PM

I have found a Luger pistol marked Erfurt on the toggle. It is chambered for 9mm and has a 4" barrel. The serial number is 1194 on the front of the trigger guard. The 94 repeats on the rear of the toggle, the top of what I believe is the extractor, the takedown lever, on the back link of the toggle under the rear sight, and on other parts of the action. The date 1940 is stamped on the top of the breech/action, ahead of the ejection port. The clip has a plastic base and is marked MADE IN GERMANY on the back side near the bottom. There is a very small 2 on the left side of the toggle near the center. There are two small stampings on the top that are too small for me to make out. The bluing is very good and the grips are in excellent condition. Can anyone tell me anything of the origins or other facts about my gun? Thanks! You can also reach me at bigdinla1@msn.com.

Edward Tinker · 06-04-2011, 05:48 PM

Yes

welcome to the forum, although its kind of nice to have a name instead of an email

Without pictures, I can say that Erfurt was no longer around after 1918 and so the toggle does not belong to the receiver (dated 1940).

Ed

bigdinla · 06-12-2011, 04:37 AM

It appears my gun is either an arsenal rework or a put together piece using an Urfurt lower assembly and a WWII era upper assembly/barrel etc. Nice old shooter though and I'm really happy to finally own a Luger. Thanks for your reply!

Hugo Borchardt · 06-12-2011, 01:10 PM

Welcome and congratulations. Would love to see a photo!

CO-08 · 06-19-2011, 10:17 PM

Congrats on your first Luger!

I remember how excited I was when I acquired my first one, then some lowlife stole it from my house years ago

so now I'm shopping for my second Luger and this forum is a great help. Oh, before someone else tells you, that thingee that holds the bullets is a magazine, not a clip.

Seriously, you can call it whatever you want but much ado on several gun forums has been stirred up about this topic.

06-04-2011, 05:01 PM	#1
bigdinla New User Join Date: Jun 2011 Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	My first Luger! I have found a Luger pistol marked Erfurt on the toggle. It is chambered for 9mm and has a 4" barrel. The serial number is 1194 on the front of the trigger guard. The 94 repeats on the rear of the toggle, the top of what I believe is the extractor, the takedown lever, on the back link of the toggle under the rear sight, and on other parts of the action. The date 1940 is stamped on the top of the breech/action, ahead of the ejection port. The clip has a plastic base and is marked MADE IN GERMANY on the back side near the bottom. There is a very small 2 on the left side of the toggle near the center. There are two small stampings on the top that are too small for me to make out. The bluing is very good and the grips are in excellent condition. Can anyone tell me anything of the origins or other facts about my gun? Thanks! You can also reach me at bigdinla1@msn.com.

06-04-2011, 05:48 PM	#2
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,929 Thanks: 2,028 Thanked 4,527 Times in 2,090 Posts	Yes welcome to the forum, although its kind of nice to have a name instead of an email Without pictures, I can say that Erfurt was no longer around after 1918 and so the toggle does not belong to the receiver (dated 1940). Ed __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

06-12-2011, 01:10 PM	#4
Hugo Borchardt User Join Date: Mar 2009 Location: Tennessee Posts: 370 Thanks: 339 Thanked 133 Times in 47 Posts	Welcome and congratulations. Would love to see a photo! __________________ My militaria collection is dedicated to the memory of my Grandfather, Marine Gunnery Sergeant Dave Hill, Jr., wounded in action at The Assault of the Second Marine Division on Betio Island, Tarawa Atoll, 20-23 November, 1943. http://www.tarawa1943.com/pages/casualties%20tarawa.htm

06-12-2011, 04:37 AM	#3
bigdinla New User Join Date: Jun 2011 Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	It appears my gun is either an arsenal rework or a put together piece using an Urfurt lower assembly and a WWII era upper assembly/barrel etc. Nice old shooter though and I'm really happy to finally own a Luger. Thanks for your reply!

06-19-2011, 10:17 PM	#5
CO-08 New User Join Date: Jan 2011 Location: Colorado Posts: 2 Thanks: 2 Thanked 0 Times in 0 Posts	Congrats on your first Luger! I remember how excited I was when I acquired my first one, then some lowlife stole it from my house years ago so now I'm shopping for my second Luger and this forum is a great help. Oh, before someone else tells you, that thingee that holds the bullets is a magazine, not a clip. Seriously, you can call it whatever you want but much ado on several gun forums has been stirred up about this topic.