Lahti-Da? - Page 4

Thor · 01-04-2017, 04:43 PM

very clever

MFC · 01-04-2017, 11:21 PM

Quote:

Originally Posted by sheepherder

Some of these I know what they're for, but like the one at top right - I have absolutely no clue what it is intended to do, or to what...

It's for a thingumma.

DonVoigt · 01-05-2017, 06:17 AM

Quote:

Originally Posted by sheepherder

Drat! Over the decades, I've had to make up jigs/fixtures for jobs I had or thought I needed, and while I don't recall if I ever detail-stripped my Lahti M-40, I did buy it in the 80's. If I made a jig for it and only used it once, it would still be on a shelf in my basement.

Problem is, I only started marking my jigs/fixtures in the last 10/12 years, so there's a bunch of 'things' that I have no idea what they are for. Here's a pic of some of them; there's another dozen scattered around, hopefully with the projects I made them for.

I was hoping that a pic of a Lahti jig would jog [no pun intended] my memory. Some of these I know what they're for, but like the one at top right - I have absolutely no clue what it is intended to do, or to what...

You know magic markers or crayons are just great for marking such stuff!

sheepherder · 01-05-2017, 09:02 AM

Quote:

Originally Posted by DonVoigt

You know magic markers or crayons are just great for marking such stuff!

At a certain age, you're sure you'll remember what they're for...

I'll be using crayons soon, just not on jigs & fixtures...

Olle · 01-29-2017, 07:59 PM

So I finally found one... Not a Lahti L-35, but a Husqvarna M/40 used by the Swedish Air Force (F4: https://en.wikipedia.org/wiki/F_4_Fr%C3%B6s%C3%B6n ). Unfortunately with an import stamp, but the price was right, it does have the accelerator and the condition is excellent.

tomaustin · 01-29-2017, 10:54 PM

OLLE, what is the date of birth of that weapon..?

sheepherder · 01-29-2017, 11:39 PM

Quote:

Originally Posted by Olle

So I finally found one... Not a Lahti L-35, but a Husqvarna M/40...

Ugh. You got one of the ugly M40's...

Olle · 01-30-2017, 10:46 AM

Quote:

Originally Posted by tomaustin

OLLE, what is the date of birth of that weapon..?

I haven't found any info on actual production year per serial number, but it should be pretty early production as it has the hex barrel and a 1st variation slide.

Quote:

Originally Posted by sheepherder

Ugh. You got one of the ugly M40's...

I actually like this model better than the smooth barreled ones. The hex barrel is one of the distinct features of this pistol, and I like the "utilitarian" look. No barrel vise needed, just put a wrench on it. As a gunsmith, you just gotta love this feature.

sheepherder · 01-30-2017, 11:16 AM

Quote:

Originally Posted by Olle

I actually like this model better than the smooth barreled ones.

It also has the trigger guard that extends to the front of the frame. That style TG also has a more 'square-ish' profile than the later style.

No matter. It's a Lahti!

I posted this link on pg 1 - you might get an idea of when it was made...

http://www.gotavapen.se/gota/m40/pist40_1.htm

Olle · 01-31-2017, 07:55 AM

Quote:

Originally Posted by sheepherder

It also has the trigger guard that extends to the front of the frame. That style TG also has a more 'square-ish' profile than the later style.

No matter. It's a Lahti!

I posted this link on pg 1 - you might get an idea of when it was made...

http://www.gotavapen.se/gota/m40/pist40_1.htm

That's my favorite reference when it comes to Swedish guns, but it can be a bit confusing sometimes. I wish they would sort it out a bit and show the different generations side by side in chronological order together with serial number ranges. And some info is just plain wrong, like for example:

Quote:

All Military m/40 pistols were melted down in Sweden

On the 23rd of January 1991 there was an accident with a blown up pistol m/40 in the Swedish Army, which resulted in physical damage to a soldier.

Since that time these pistols have been banned and now, according to a General Order, all of them destroyed. These Swedish pistols were never sold as surplus.

There's obviously plenty of surplus guns and many of them are still used by target shooters in Sweden, some of which were actually donated by the army for use in shooting clubs when they were taken out of service. Also, I did my military service in '82-'83, and I didn't get any pistol training as they simply didn't have any pistols left (ie: 10 years earlier than they state). The new issue gun (Glock 17) was accepted in 1988, and at that time there shouldn't have been any M/40s left in use.

In any case, that trigger guard is a bit ungainly looking, but on the other hand: This gun is a behemoth and the smaller trigger guard looks out of place IMO. Pretty or not, I think it looks like it belongs there. You just can't make an M/40 look elegant.

Zorba · 01-31-2017, 05:06 PM

World's first crew served pistol!

a65l · 02-21-2022, 03:26 PM

So I joined the Lahti club today. I'll get a couple pics when I get a minute, but it looks just about like any other Lahti out there. M40, Danish contract, fairly low (54xx) serial number. I took it out and put some rounds through it.. once i figured out where it was shooting, it seems to throw pretty consistent groups.
I got it off Gunbroker, and I actually put in fairly low bids on 2 Danish contract M40's. Well, turns out their not the hot thing right now, and I wound up winning both. Ah well, guess I'll have to sell one. I think I'll wait until the other one arrives and see which one I like better...

Question, though. Serial number is prefaced with "d", and is in the correct range.. but it dosen't have the HV under the Danish crown on the but end of the receiver. Receiver and slide have matching S/N''s. I also don't see an import mark anywhere... any thoughts?

01-04-2017, 04:43 PM	#61
Thor User Join Date: Jun 2002 Location: Rio Rancho, New Mexico Posts: 4,583 Thanks: 958 Thanked 970 Times in 276 Posts	very clever __________________ Thor's Luger Clinic http://members.rennlist.com/lugerman/ Ted Green (Thor Yaller Boots) 725 Western Hills Dr SE, Rio Rancho, NM 87124 915-526-8925 Email thor340@aol.com ----------------------------------- John3:3 Jesus answered and said to him, "Most assuredly, I say to you, unless one is born again, he cannot see the kingdom of God."

01-29-2017, 07:59 PM	#65
Olle User Join Date: Feb 2010 Location: Tennessee Posts: 1,149 Thanks: 159 Thanked 663 Times in 318 Posts	So I finally found one... Not a Lahti L-35, but a Husqvarna M/40 used by the Swedish Air Force (F4: https://en.wikipedia.org/wiki/F_4_Fr%C3%B6s%C3%B6n ). Unfortunately with an import stamp, but the price was right, it does have the accelerator and the condition is excellent. Attached Thumbnails __________________ Deer Hollow Enterprises, LLC Gun repair and restoration

01-29-2017, 10:54 PM	#66
tomaustin Lifer X5 Lifetime Forum Patron Join Date: Sep 2008 Location: texas Posts: 708 Thanks: 87 Thanked 522 Times in 201 Posts	OLLE, what is the date of birth of that weapon..?

01-31-2017, 05:06 PM	#71
Zorba User Join Date: Feb 2013 Location: Merritt Island, Fl Posts: 951 Thanks: 776 Thanked 526 Times in 289 Posts	World's first crew served pistol!

02-21-2022, 03:26 PM	#72
a65l User Join Date: Jun 2020 Posts: 10 Thanks: 0 Thanked 17 Times in 8 Posts	So I joined the Lahti club today. I'll get a couple pics when I get a minute, but it looks just about like any other Lahti out there. M40, Danish contract, fairly low (54xx) serial number. I took it out and put some rounds through it.. once i figured out where it was shooting, it seems to throw pretty consistent groups. I got it off Gunbroker, and I actually put in fairly low bids on 2 Danish contract M40's. Well, turns out their not the hot thing right now, and I wound up winning both. Ah well, guess I'll have to sell one. I think I'll wait until the other one arrives and see which one I like better... Question, though. Serial number is prefaced with "d", and is in the correct range.. but it dosen't have the HV under the Danish crown on the but end of the receiver. Receiver and slide have matching S/N''s. I also don't see an import mark anywhere... any thoughts?