my profile |
register |
faq |
search upload photo | donate | calendar |
06-10-2013, 05:49 AM | #1 |
User
Join Date: Jun 2013
Posts: 20
Thanks: 0
Thanked 1 Time in 1 Post
|
C96 value?
i've recently inherited a c96 and would like to insure it, but i'm uncertain to the value. i've gotten conflicting reports from gun stores and the insurer, so i figure i should ask collectors what may be appropriate.
all parts have matching serial numbers (frame, bolt, hammer, et c). some small parts (safety, extractor, et c) are salt blue. the finish is original as far as i know (never any record of rebluing). the grips are serial numbered to the gun (stamped). there is no prussian eagle on the front of the magazine, but the other marks are quite visible. surface rust on most of it, unfortunately, but fully functioning otherwise. bore is clean without pits or rust, but not bright. strong rifling. the green bits you may see are fuzz from the blanket. haven't had a chance to do anything but examine, photograph, and oil. any help is greatly appreciated. Last edited by chazbotic; 06-10-2013 at 09:20 AM. |
06-10-2013, 06:28 AM | #2 |
User
Join Date: Mar 2008
Location: Marco Island, Florida
Posts: 4,867
Thanks: 1,685
Thanked 1,916 Times in 1,192 Posts
|
I might be mistaken, but my eye tells me gently buffed and reblued some time ago. It would help if all the oil and fuzz was removed an additional photos provided.
|
06-10-2013, 08:24 AM | #3 |
Lifer
Lifetime Forum Patron Join Date: Feb 2009
Location: ...on the 'ol Erie Canal...
Posts: 8,181
Thanks: 1,398
Thanked 4,438 Times in 2,327 Posts
|
9mm; 50-500 sights; grips look good; pitting, but photos often exaggerate pits; I would agree with Doug that the bluing is too good to be original, more of it should have oxidized into brown-ish 'patina'...The high wear spots aren't worn enough...Edges that should be sharp are slightly rounded [the 'gently buffed' Doug mentioned]...Impact area behind locking bolt is good, with the anemic 9mm, that's normal...
I have a couple Mausers, and although Alvin is the person I listen to concerning Mausers, I would say ~$700-$750 for a pitted 9mm...If I was buying...maybe ~$800-$850 if I was selling... IMHO, the 7.63mm Broomhandles are more desirable than the 9mm's...And the full-size C96/M30 more desirable than the Bolos... Insure for whatever Simpsons lists for a nice 9mm C96, as that's what you'll want if it needs replacement... BTW: Several knowledgeable members of this forum can not see and therefore won't comment on your Mauser because they work for corporations (or the government) who provide their Internet access for them but filter out or block social media sites like PhotoBucket, YouTube, SmugMug, TinyPic, Google+, Flickr, etc...If you want a rounded selection of opinions, attach your pics right here, to your thread... ...And take pics outside on a cloudy day [indirect light, no flash]... ...Just my $.02...
__________________
I like my coffee the way I like my women... ...Cold and bitter... |
06-10-2013, 09:03 AM | #4 |
User
Join Date: Mar 2008
Location: Marco Island, Florida
Posts: 4,867
Thanks: 1,685
Thanked 1,916 Times in 1,192 Posts
|
As Rich mentioned. It is important to know if your sights aré 1000 meter or ?500 meter sights
|
The following member says Thank You to alanint for your post: |
06-10-2013, 09:17 AM | #5 | |
Lifer
Lifetime Forum Patron Join Date: Feb 2009
Location: ...on the 'ol Erie Canal...
Posts: 8,181
Thanks: 1,398
Thanked 4,438 Times in 2,327 Posts
|
Quote:
Pic attached...Of course, over the years, sight leafs get swapped, 9mm & 7.63 graduations changed...Even the FN Mauser carbine sight leaf will fit... I don't know offhand what the Bolo uses; probably the 50-500 sights...
__________________
I like my coffee the way I like my women... ...Cold and bitter... |
|
06-10-2013, 09:18 AM | #6 |
User
Join Date: Jun 2013
Posts: 20
Thanks: 0
Thanked 1 Time in 1 Post
|
they are 500 meter tangent sights. the edges are quite sharp in person, actually, but yes i will take better photos once it is daylight on the patio where lighting is more even and brighter.
|
06-10-2013, 09:56 AM | #7 |
Lifer
Lifetime Forum Patron Join Date: Feb 2009
Location: ...on the 'ol Erie Canal...
Posts: 8,181
Thanks: 1,398
Thanked 4,438 Times in 2,327 Posts
|
I mentioned that the FN Mauser carbine (the K98 rifle/carbine clone; not the pistol) rear sight will fit the Broomhandle; here's a comparison pic of the 50-1000 sight and the FN carbine sight...The leaf, slider, and flat spring will all fit the Broomhandle (some minor hand fitting may be required)...
1400 meter Broomhandle... Well, it's no more optimistic than an Artillery Luger... I've fitted one of these to my long-barreled C96 wildcat; I'm sure others have done the same...Original C96 50-1000 sights are difficult to find, for some reason...
__________________
I like my coffee the way I like my women... ...Cold and bitter... |
06-10-2013, 10:26 AM | #8 |
User
Join Date: Aug 2002
Location: South America
Posts: 948
Thanks: 598
Thanked 584 Times in 254 Posts
|
In my opinion, the gun is in original condition.
Pictures can be deceiving when evaluating finish. Pictures under indirect natural light are the best choice for a better evaluation. |
The following member says Thank You to Douglas Jr. for your post: |
06-10-2013, 05:59 PM | #10 |
User
Join Date: Mar 2008
Location: Marco Island, Florida
Posts: 4,867
Thanks: 1,685
Thanked 1,916 Times in 1,192 Posts
|
I would agree that the finish is original, based on the new photos.
|
06-10-2013, 06:51 PM | #11 |
User
Join Date: Jul 2007
Location: US
Posts: 3,843
Thanks: 132
Thanked 729 Times in 438 Posts
|
No kidding. How can this be original finish. But, don't be frustrated. Value depends on viewers. At least, it's a genuine German made 9mm. Back a few days ago, a converted 9mm (from 7,63mm) in refurbished mode attracted bidding at $2000 on gunbroker.com. And, there were more than one bidder.... Fortunately (or unfortunately ??), $2000 was still lower than seller's reserve. But the gun disappeared, probably bidder and seller compromised and settled somewhere slightly higher than $2000? God knows.
Given 9mm "Selbstlader" marked (in five Hanji) assembled from Schnellfeuer parts in 1980s steadily goes around $1200 nowadays, refurbished vs refurbished, this Red 9's value should be a little bit higher that, IMO. But many players were attracted by the removable magazine, and your Red 9 is fixed magazine, that's a disadvantage on your gun. So, that reference dollar number may not work. |
06-10-2013, 10:32 PM | #12 |
User
Join Date: Jun 2013
Posts: 20
Thanks: 0
Thanked 1 Time in 1 Post
|
so it is or isn't an original finish? to my knowledge, it's had this finish since the mid 40's, when my grandfather acquired it from France, prior to that i'm unsure. $1200 a good insurance value? to be clear, it is a 5.5" barrel (measured with a dowel). i have no plans to sell; the value is for insurance paperwork, which must be at "fair market value" and can be adjusted later in claims. this, along with a few other firearms are family heirlooms. thank you so much everyone.
is it normal for small parts to have that iridescent oily look? it's on most small parts, including the extractor, safety, tangent sight, and a few others. |
06-10-2013, 10:47 PM | #13 |
User
Join Date: Mar 2008
Location: Marco Island, Florida
Posts: 4,867
Thanks: 1,685
Thanked 1,916 Times in 1,192 Posts
|
Yes, these parts are fire blued and will have that rainbow blue look to them.
|
06-11-2013, 07:23 AM | #14 |
User
Join Date: Nov 2009
Location: Vermont
Posts: 64
Thanks: 14
Thanked 45 Times in 15 Posts
|
Chaz, I think $1200 is probably on the low side of the retail range. Were you to replace it today, I suspect you'd be paying closer to $1800. For a wartime gun, it appears to be in excellent condition, uncommon in these old timers. If you visit GunsAmerica or GunBroker, you can search for similar Broomhandles or Mauser pistols and make your own comparisons.
You have a wonderful family treasure on your hands. If there were any stories about how your Grandfather got the gun, write them down and keep them with the gun. They are part of your Grandfather's history during the war. Regards, John |
06-11-2013, 07:50 AM | #15 |
User
Join Date: Mar 2008
Location: Marco Island, Florida
Posts: 4,867
Thanks: 1,685
Thanked 1,916 Times in 1,192 Posts
|
Alvin,
You are the resident expert here, but your comment is confusing. Do you believe the gun has its original finish or not? |
06-11-2013, 08:11 AM | #16 |
User
Join Date: Nov 2011
Posts: 224
Thanks: 0
Thanked 81 Times in 41 Posts
|
Dip refinished on the frame and barrel based on the massive pitting under the blue.
|
06-11-2013, 09:15 AM | #17 |
User
Join Date: Jul 2007
Location: US
Posts: 3,843
Thanks: 132
Thanked 729 Times in 438 Posts
|
This red 9 was non-professionally reblued. I am not an expert, but I have seen many Broomhandles on the internet. Thanks for the internet, otherwise, people like me won't have time, money, and energy to run around the country to join all those gun shows. Internet online auction is a big gun show everyday
|
06-11-2013, 01:01 PM | #18 |
User
Join Date: Jun 2013
Posts: 20
Thanks: 0
Thanked 1 Time in 1 Post
|
i wonder when it was refinished then, as i understand it, it has never been refinished since the 1940's, and been held in storage since then. a friend, from his experiences with mostly colt revolvers, has mentioned that it doesn't appear to be rounded and stampings and edges are still "flat where flat and round where round", whatever that means. honestly i'm not much of an older firearm person, my personal arms are generally the more modern offerings, but i know quality when i see it.
thank you everyone. i think i'll tell the insurer $1500 and split the difference, unless that's too low. i find the pricing from simpsons ltd and others to be inconsistent. |
06-11-2013, 06:07 PM | #19 |
User
Join Date: Jul 2009
Location: So Cal
Posts: 459
Thanks: 774
Thanked 143 Times in 87 Posts
|
Alvin
What is the 6 pointed star stamping on the bottom of the barrel signify? Thanks Bob
__________________
"I think,therefore I own guns" |
06-11-2013, 06:24 PM | #20 | |
User
Join Date: Jul 2007
Location: US
Posts: 3,843
Thanks: 132
Thanked 729 Times in 438 Posts
|
Quote:
Just a guesstimation. Mauro and Vlim had Mauser document. They probably can offer more information on Mauser's manufacturing and QA process. |
|
The following member says Thank You to alvin for your post: |
|
|