LugerForum Discussion Forums my profile | register | faq | search
upload photo | donate | calendar

Go Back   LugerForum Discussion Forums > General Discussion Forums > Repairs, Restoration & Refinishing

Reply
Thread Tools Display Modes
Unread 09-22-2014, 02:50 PM   #1
hayhugh
User
 
hayhugh's Avatar
 
Join Date: Oct 2013
Location: Florida/Penna
Posts: 882
Thanks: 840
Thanked 507 Times in 270 Posts
Default Remove extractor?

Waiting for delivery of auction bought 1900 Swiss contract luger. It has unstrawed extractor. Just purchased original strawed ejector from the Lugerdoc. 1908 lugers have pin to hold extractor in place. How is orginal 1900 extractor removed and replaced. Don't want to screwup new or old extractor. Any info gladly accepted. Thank you, Hugh
hayhugh is offline   Reply With Quote
Unread 09-22-2014, 04:38 PM   #2
Ron Wood
Moderator
2010 LugerForum
Patron
 
Ron Wood's Avatar
 
Join Date: Jun 2002
Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso
Posts: 6,985
Thanks: 1,059
Thanked 5,082 Times in 1,673 Posts
Default

The 1900 extractor is really just a spring. The rear of the extractor is a pin that fits into the breech block and is held in place by the spring tension on a lug on the lower side of the extractor. To remove the extractor, you have to use a tool, preferably something non-marring like a wood dowel shaped like a screwdriver on the end, and lift up on the forward end of the extractor (the part that grasps the cartridge) until the lug is free and you can slide the extractor forward to remove it. A risky process on an old and/or brittle extractor, but that is the way you do it.
Attached Images
 
__________________
If it's made after 1918...it's a reproduction

Last edited by Ron Wood; 09-22-2014 at 05:24 PM.
Ron Wood is offline   Reply With Quote
The following 6 members says Thank You to Ron Wood for your post:
Unread 09-22-2014, 05:17 PM   #3
hayhugh
User
 
hayhugh's Avatar
 
Join Date: Oct 2013
Location: Florida/Penna
Posts: 882
Thanks: 840
Thanked 507 Times in 270 Posts
Default

Thank you Ron, I kind of thought that would be the way, but wanted verification.
hayhugh is offline   Reply With Quote
Unread 09-22-2014, 05:21 PM   #4
sheepherder
Lifer
Lifetime Forum
Patron
 
sheepherder's Avatar
 
Join Date: Feb 2009
Location: ...on the 'ol Erie Canal...
Posts: 8,180
Thanks: 1,394
Thanked 4,438 Times in 2,327 Posts
Default

Ron, this procedure is probably in the FAQ, but IMHO it would make a good 'sticky'.

BTW: The Nambu Type 14 extractor is removed the same way.
__________________
I like my coffee the
way I like my women...
...Cold and bitter...
sheepherder is offline   Reply With Quote
Unread 09-23-2014, 11:27 AM   #5
John Sabato
Lifer
Lifetime Forum
Patron
 
John Sabato's Avatar
 
Join Date: Jun 2002
Location: The Capital of the Free World
Posts: 10,150
Thanks: 3,003
Thanked 2,304 Times in 1,096 Posts
Default

I thought all you had to do to remove a nambu extractor was to shoot the gun!

Sorry... couldn't resist the opportunity!
__________________
regards, -John S

"...We hold these truths to be self-evident that ALL men are created EQUAL and are endowed by their Creator with certain UNALIENABLE rights, and among these are life, LIBERTY, and the pursuit of happiness..."
John Sabato is offline   Reply With Quote
The following 2 members says Thank You to John Sabato for your post:
Unread 09-23-2014, 12:51 PM   #6
Lugerdoc
Patron
LugerForum
Patron
 
Lugerdoc's Avatar
 
Join Date: Jun 2002
Location: POB 398 St.Charles,MO. 63302
Posts: 5,089
Thanks: 6
Thanked 736 Times in 483 Posts
Default

I usually use a flat blade screw driver, placing it under the lip of extractor and pushing it up high enough for the stud on the bottom to clear the breech block and forward to remove. TH
__________________
Tom Heller POB 398 ST.Charles, MO. 63302
Tel 636-447-3006 lugerdoc@charter.net
Lugerdoc is offline   Reply With Quote
The following 2 members says Thank You to Lugerdoc for your post:
Unread 09-24-2014, 10:08 PM   #7
LU1900
User
 
LU1900's Avatar
 
Join Date: Jul 2003
Location: FRANCE
Posts: 900
Thanks: 31
Thanked 460 Times in 193 Posts
Default

With alls works you do on it sheepherder , you forgot the C96 !
__________________
Best regards from France...Patrice
https://www.fichier-pdf.fr/2016/03/1...nd-snail-drum/
LU1900 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:45 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2023, Lugerforum.com