Printing

Steve Richards · 11-15-2002, 02:39 AM

How can a given post be printed without jumping through the hoops of importing it into paint or doing an entire screen print?

ViggoG · 11-15-2002, 03:53 AM

Are you running a PC or Mac?(Dumb me ? Paint is PC)
You should be able to pull down a Print/Printer command from your bar above the Forum screen.
However if it is like mine it prints the complete thread.
I Highlite the portions that I want to print separately copy(control c)and paste them to my Word processor page (control v), and print from there.
I have to copy and paste pictures to my scanner page or save them by right clicking them with the mouse and saving them to any file that I have selected.
Hope that this gives some help.
ViggoG

John Sabato · 11-15-2002, 11:43 AM

Viggo has got it right Steve... just highlight what you want to print... then copy and paste it into a word processing document...

Edward Tinker · 11-16-2002, 07:34 PM

Also depends on what version of IE Explorer or Netscape you are using.

If using IE, and a newer version, and if you Right Click, you can print in frames or without.

This might depend on printer, on my print screen I right click, then the print screen comes up and then under the options tab, I can change it to --
1. to print as laid out on the screen
2. only selected screen
3. or all frames individually.

Ed

11-15-2002, 02:39 AM	#1
Steve Richards User Join Date: Jun 2002 Location: Beaverton, Oregon Posts: 487 Thanks: 0 Thanked 0 Times in 0 Posts	Printing How can a given post be printed without jumping through the hoops of importing it into paint or doing an entire screen print?

11-15-2002, 11:43 AM	#3
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,150 Thanks: 3,003 Thanked 2,304 Times in 1,096 Posts	Viggo has got it right Steve... just highlight what you want to print... then copy and paste it into a word processing document... __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

11-16-2002, 07:34 PM	#4
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,912 Thanks: 1,989 Thanked 4,502 Times in 2,077 Posts	Also depends on what version of IE Explorer or Netscape you are using. If using IE, and a newer version, and if you Right Click, you can print in frames or without. This might depend on printer, on my print screen I right click, then the print screen comes up and then under the options tab, I can change it to -- 1. to print as laid out on the screen 2. only selected screen 3. or all frames individually. Ed __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

11-15-2002, 03:53 AM	#2
ViggoG RIP Join Date: Jun 2002 Location: South Side Virginia Posts: 534 Thanks: 0 Thanked 1 Time in 1 Post	Are you running a PC or Mac?(Dumb me ? Paint is PC) You should be able to pull down a Print/Printer command from your bar above the Forum screen. However if it is like mine it prints the complete thread. I Highlite the portions that I want to print separately copy(control c)and paste them to my Word processor page (control v), and print from there. I have to copy and paste pictures to my scanner page or save them by right clicking them with the mouse and saving them to any file that I have selected. Hope that this gives some help. ViggoG