PLEASE READ!!! It's important info about the upgrade...

John D. · 12-20-2004, 07:55 AM

Repeated post... Please read (again)..!!!

First - PLEASE REMEMBER when we go live on the new Forum - your "login name" will be your screen name in this forum. So, for example - my "login name" would be "John D.". In the new Forum - it has a single login and screen name.... Also - your Sceen Name and password are CaSe SeNsItIvE (as Ron W. can attest to <img border="0" title="" alt="[Wink]" src="wink.gif" /> )

Second - PLEASE COPY YOUR PRIVATE MESSAGES from this Forum. You can "copy and paste them" into a text editor from this forum. The import utility I'm re-programming does not work well with PMs . However - once the new forum is on-line - I will open this old Forum so you still retrieve those messages...

Third - PLEASE BE SURE that your registered e-mail to this Forum is correct. You can check it by clicking on "my profile" above. The reason that a correct/current e-mail is important - is as folks reply to posts/threads you have posted in - you will get an e-mail telling you who replied and a link to open that thread, should you want to continue discussions.

Finally - my thanks to each and all of you......

My Best Always!

John D.

Edward Tinker · 12-20-2004, 12:22 PM

I know those guys, Pete and Repeat

Herb · 12-20-2004, 01:10 PM

Ed, me too but does Repete have any monetary interest or endorsement of the item mentioned??

wterrell · 12-20-2004, 06:43 PM

Will this forum be loaded into the frames pages later ? (url: www.Lugerforum.com) Or will it remain a non-frames site?

Admin · 12-20-2004, 06:47 PM

Quote:

Originally posted by wterrell
Will this forum be loaded into the frames pages later ? (url: www.Lugerforum.com) Or will it remain a non-frames site?

Hi Wes,

It already is loaded into the main site as a link. Try a "refresh" on your browser - and if it doesn't work - then wait for your proxy's cache to expire..

Thanks!

John D.

wterrell · 12-20-2004, 06:51 PM

OK it works great now!

Me like!

Pete Ebbink · 12-20-2004, 06:51 PM

Hi John D.,

It looks like the photos in the existing discussion threads did not come over in the new birth of the Luger Forum...

Will we have to go in and fix each message where a previous photo was embedded ?

If yes, I want a doubling in my pay as Moderator...

Regards,

Pete...

Admin · 12-20-2004, 07:00 PM

Hey Pete..!

The only photos that have been dropped - are the ones that used the THUMB hack..??? All the rest - should be fine??

Well - except for your TYPING gremlin??!!!

Best to you!

John D.

Pete Ebbink · 12-20-2004, 07:42 PM

Hi John D.,

Unfortunately...I have been trying to be a nice guy and I regularly thumbed all the photos I have posted for more than a year...so folks without big CRT's or LCD's screen would not have to scroll horizontally while reading postings...

When I have some down-time during the Holidays...I guess I will get busy going back into posts (in the Swiss section...maybe, only...) and getting rid of the "thumb" stuff...

Otherwise...you have done a marvelous job with the Upgrade !!!

Regards,

Pete...

Johnny C. Kitchens · 12-20-2004, 09:07 PM

I notice I have to relogin for everything I click on in the message section. The reason, it wants my cookies on. Why???
Wasn't needed before...

John Sabato · 12-21-2004, 09:15 AM

Simple Johnny... New Software... New features = New requirements.... Everything is a tradeoff when you upgrade...

John Sabato · 12-21-2004, 09:18 AM

Okay John D. ... so where do I find the Admin functions for this board? A PM would be helpful... Anything similar to the last control panel where I can access the membership database and do searches and stuff? How about new registration approvals? Lots of questions.... when you can find the time to brief me.

John D. · 12-21-2004, 09:22 AM

Well - actually... The previous Forum used persistent Cookies as well - which are the same structure as this Forum. My guess is that the persistent Cookie from the old Forum was saved before a Browser upgrade or firewall update, which allow users to accept/reject them.

Try the ADMIN post above as to how to stay logged into this Forum.

Also - Johnny - it's the "exact" same cookie format as the 1911forum.com, so if you aren't having a problem there, you shouldn't on this Forum either..?

Best to you,

John D.

John D. · 12-21-2004, 09:23 AM

Hang on..

I'm trying to set up a CP for you as we speak.. Err... As I type..

John Sabato · 12-21-2004, 09:28 AM

I shall await your instructions sir... Just wanted to make sure I have it committed to memory before I start my Christmas leave, 22-30 Dec, so I can check in if I get close to an internet terminal...

PLEASE be sure and tell me how to locate a specific user password and send it to them... I get those requests all the time...

Johnny C. Kitchens · 12-21-2004, 10:23 PM

Never been on the 1911Forum...

John D. · 12-21-2004, 10:34 PM

Quote:

Originally posted by Johnny C. Kitchens
Never been on the 1911Forum...

Well - after 5 years - at LEAST I'M CONSISTIENT!!!

It's not you - but Mr. Johnny Peppers.

I know I made the same mistake when this Forum first opened....

Almost 5 years ago...

Frankly - one of you guys has to change your name..

Sheeshhh... Sorry about that!!

Anyway - now that we've discussed my case of Alzheimers - are the cookies working for you now?

John D.

Ron Smith · 12-22-2004, 07:47 AM

Jeez John,
It's perfectly clear to me. John D interlaced the squigit with the flagit spring, and now you've got to munipulate the whatzit with the fender pump and the muffler bearings. Don't you know nothin'?

I think my starter cord just broke!!

Edward Tinker · 12-22-2004, 12:42 PM

Well, to tell you the truth, this is one of the most seamless transitions I have ever seen!

Dang, almighty, smokey weeD!!

In otherwords, I am impressed John D., take Christmas off!

Johnny C. Kitchens · 12-23-2004, 12:34 AM

If I turn them on everythings works as before. Just gotta remember to turn them off before I leave...

12-20-2004, 07:55 AM	#1
John D. Administrator & Site Owner LugerForum Patron Join Date: Jun 2002 Location: A Little NE of Somewhere... Posts: 2,651 Thanks: 471 Thanked 513 Times in 127 Posts	PLEASE READ!!! It's important info about the upgrade... Repeated post... Please read (again)..!!! First - PLEASE REMEMBER when we go live on the new Forum - your "login name" will be your screen name in this forum. So, for example - my "login name" would be "John D.". In the new Forum - it has a single login and screen name.... Also - your Sceen Name and password are CaSe SeNsItIvE (as Ron W. can attest to <img border="0" title="" alt="[Wink]" src="wink.gif" /> ) Second - PLEASE COPY YOUR PRIVATE MESSAGES from this Forum. You can "copy and paste them" into a text editor from this forum. The import utility I'm re-programming does not work well with PMs . However - once the new forum is on-line - I will open this old Forum so you still retrieve those messages... Third - PLEASE BE SURE that your registered e-mail to this Forum is correct. You can check it by clicking on "my profile" above. The reason that a correct/current e-mail is important - is as folks reply to posts/threads you have posted in - you will get an e-mail telling you who replied and a link to open that thread, should you want to continue discussions. Finally - my thanks to each and all of you...... My Best Always! John D.

12-20-2004, 12:22 PM	#2
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,909 Thanks: 1,986 Thanked 4,500 Times in 2,076 Posts	I know those guys, Pete and Repeat __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

12-20-2004, 01:10 PM	#3
Herb User Join Date: Jun 2002 Location: Utah, in the land of the Sleeping Rainbow Posts: 1,457 Thanks: 0 Thanked 1 Time in 1 Post	Ed, me too but does Repete have any monetary interest or endorsement of the item mentioned?? __________________ Utah, where gun control means a steady trigger pull

12-20-2004, 06:43 PM	#4
wterrell User Join Date: Jun 2002 Location: Colorado Posts: 1,096 Thanks: 0 Thanked 1 Time in 1 Post	Will this forum be loaded into the frames pages later ? (url: www.Lugerforum.com) Or will it remain a non-frames site? __________________ Noli me vocare, ego te vocabo, wes --------------------

12-20-2004, 06:51 PM	#6
wterrell User Join Date: Jun 2002 Location: Colorado Posts: 1,096 Thanks: 0 Thanked 1 Time in 1 Post	OK it works great now! Me like! __________________ Noli me vocare, ego te vocabo, wes --------------------

12-20-2004, 06:51 PM	#7
Pete Ebbink User Join Date: Jun 2002 Location: The USA Posts: 5,919 Thanks: 0 Thanked 6 Times in 4 Posts	Photos...? Hi John D., It looks like the photos in the existing discussion threads did not come over in the new birth of the Luger Forum... Will we have to go in and fix each message where a previous photo was embedded ? If yes, I want a doubling in my pay as Moderator... Regards, Pete...

12-20-2004, 07:00 PM	#8
Admin Administrator Join Date: Feb 2003 Posts: 30 Thanks: 0 Thanked 0 Times in 0 Posts	Hey Pete..! The only photos that have been dropped - are the ones that used the THUMB hack..??? All the rest - should be fine?? Well - except for your TYPING gremlin??!!! Best to you! John D.

12-20-2004, 07:42 PM	#9
Pete Ebbink User Join Date: Jun 2002 Location: The USA Posts: 5,919 Thanks: 0 Thanked 6 Times in 4 Posts	WOW... Hi John D., Unfortunately...I have been trying to be a nice guy and I regularly thumbed all the photos I have posted for more than a year...so folks without big CRT's or LCD's screen would not have to scroll horizontally while reading postings... When I have some down-time during the Holidays...I guess I will get busy going back into posts (in the Swiss section...maybe, only...) and getting rid of the "thumb" stuff... Otherwise...you have done a marvelous job with the Upgrade !!! Regards, Pete...

12-20-2004, 09:07 PM	#10
Johnny C. Kitchens User Join Date: Jan 2003 Location: Arlington, Texas Posts: 518 Thanks: 0 Thanked 20 Times in 8 Posts	I notice I have to relogin for everything I click on in the message section. The reason, it wants my cookies on. Why??? Wasn't needed before... __________________ Johnny C. Kitchens

12-21-2004, 09:15 AM	#11
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,150 Thanks: 3,003 Thanked 2,304 Times in 1,096 Posts	Simple Johnny... New Software... New features = New requirements.... Everything is a tradeoff when you upgrade... __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

12-21-2004, 09:18 AM	#12
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,150 Thanks: 3,003 Thanked 2,304 Times in 1,096 Posts	Okay John D. ... so where do I find the Admin functions for this board? A PM would be helpful... Anything similar to the last control panel where I can access the membership database and do searches and stuff? How about new registration approvals? Lots of questions.... when you can find the time to brief me. __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

12-21-2004, 09:22 AM	#13
John D. Administrator & Site Owner LugerForum Patron Join Date: Jun 2002 Location: A Little NE of Somewhere... Posts: 2,651 Thanks: 471 Thanked 513 Times in 127 Posts	Well - actually... The previous Forum used persistent Cookies as well - which are the same structure as this Forum. My guess is that the persistent Cookie from the old Forum was saved before a Browser upgrade or firewall update, which allow users to accept/reject them. Try the ADMIN post above as to how to stay logged into this Forum. Also - Johnny - it's the "exact" same cookie format as the 1911forum.com, so if you aren't having a problem there, you shouldn't on this Forum either..? Best to you, John D.

12-21-2004, 09:23 AM	#14
John D. Administrator & Site Owner LugerForum Patron Join Date: Jun 2002 Location: A Little NE of Somewhere... Posts: 2,651 Thanks: 471 Thanked 513 Times in 127 Posts	Hang on.. I'm trying to set up a CP for you as we speak.. Err... As I type..

12-21-2004, 09:28 AM	#15
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,150 Thanks: 3,003 Thanked 2,304 Times in 1,096 Posts	I shall await your instructions sir... Just wanted to make sure I have it committed to memory before I start my Christmas leave, 22-30 Dec, so I can check in if I get close to an internet terminal... PLEASE be sure and tell me how to locate a specific user password and send it to them... I get those requests all the time... __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

12-21-2004, 10:23 PM	#16
Johnny C. Kitchens User Join Date: Jan 2003 Location: Arlington, Texas Posts: 518 Thanks: 0 Thanked 20 Times in 8 Posts	Never been on the 1911Forum... __________________ Johnny C. Kitchens

12-22-2004, 07:47 AM	#18
Ron Smith User Join Date: Feb 2004 Location: Orygun Posts: 4,243 Thanks: 118 Thanked 245 Times in 150 Posts	Jeez John, It's perfectly clear to me. John D interlaced the squigit with the flagit spring, and now you've got to munipulate the whatzit with the fender pump and the muffler bearings. Don't you know nothin'? I think my starter cord just broke!! __________________ I Still Need DWM side plate #49... if anyone runs across a nice one. What ~Rudyard Kipling~ said...

12-22-2004, 12:42 PM	#19
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,909 Thanks: 1,986 Thanked 4,500 Times in 2,076 Posts	Well, to tell you the truth, this is one of the most seamless transitions I have ever seen! Dang, almighty, smokey weeD!! In otherwords, I am impressed John D., take Christmas off!

12-23-2004, 12:34 AM	#20
Johnny C. Kitchens User Join Date: Jan 2003 Location: Arlington, Texas Posts: 518 Thanks: 0 Thanked 20 Times in 8 Posts	If I turn them on everythings works as before. Just gotta remember to turn them off before I leave... __________________ Johnny C. Kitchens