my profile |
register |
faq |
search upload photo | donate | calendar |
04-06-2018, 10:51 AM | #1 |
User
Join Date: Nov 2008
Location: Upstate NY
Posts: 30
Thanks: 135
Thanked 13 Times in 7 Posts
|
100gr Speer plinkster in 30 Luger
Has anyone used the 100gr plinker bullet from Speer in their 30 Luger? Dimensionally it looks like it'll work. I'm using Bullseye or Unique powder any load information would be appreciated. The 44th Lyman's manual shows starting loads of 3.5 grains and 4.4 grains for a 93 grain FMJ bullet.
Thanks for any help you can give me. Last edited by CRob; 04-13-2018 at 05:36 AM. |
04-06-2018, 12:31 PM | #2 |
Lifer
Lifetime Forum Patron Join Date: Feb 2009
Location: ...on the 'ol Erie Canal...
Posts: 8,182
Thanks: 1,400
Thanked 4,442 Times in 2,330 Posts
|
https://www.natchezss.com/speer-spec...ts-100-ct.html Price: $11.99/100 Availability: In stock Product Number: SP1805 I like the idea of a slightly heavier bullet for longer barreled Lugers. I'll be testing my 7.65 'carbine' shortly, as well as a 7.65 Parabellum barreled Nambu. This bullet may be something I'd like.
__________________
I like my coffee the way I like my women... ...Cold and bitter... |
04-07-2018, 07:28 AM | #3 |
User
Join Date: Nov 2008
Location: Upstate NY
Posts: 30
Thanks: 135
Thanked 13 Times in 7 Posts
|
I've loaded up five to take to the range. Here's what three of them look like. From left to right Hornady 86gr, Sierra 85gr, then three of the Speer 100gr , last is a PPU 93 gr factory load (my favorite). My concern is the depth the bullet seats in the case.
|
05-04-2018, 05:45 AM | #4 |
User
Join Date: Nov 2008
Location: Upstate NY
Posts: 30
Thanks: 135
Thanked 13 Times in 7 Posts
|
Fired them off yesterday seemed to work fine no broken parts. I think I'll load up about 50 of them.
|
05-04-2018, 10:51 AM | #5 |
User
Join Date: Jun 2002
Posts: 339
Thanks: 81
Thanked 359 Times in 198 Posts
|
I have used the 100 gr Speer Plinker in the 30 Luger, but it has been a while. I remember seeing the useage of said bullet in the 30 Luger in which a Handloader article reference was given for loading info; but that has been years ago.
There are always times when components are scarce. When I tried the Speer bullet, one could not find much in cases or bullets for the 30 Luger. So the useage of odd bullets and making cases came to light if I wanted to shoot the Lugers. Such comes and goes, glad reloading allowed me to continue to shoot. I believe if you search the net for "30 Luger speer plinker loads" that some info will come up, as usual compare to your own references and basic common reloading sense; fake news or miss typed critical things you know or flat did not write what they thought they meant. I do not remember any issues with the exposed lead nose in feeding in my Lugers. I never thought about depth into the case in those days, but obviously, less volume effects pressures. One would suspect that starting low per 90+gr bullet references, or a bit less; and work up with the 100. Please use discretion. I have reserved my real 30 Luger shooting in vintage examples of Luger pistols, ie ones that I have not taken apart yet for rebarreling. I have come use to what was called here, the 7.65x19; which is the full length 9mmx19 case necked up to 30 caliber. 30 Luger dies are shortened and the 30 Luger finish reamer run in short appropriately. Getting older, I do not bother picking up my wildcat cases as one pass thru the shortened dies is it to forming fwiw. Real 30 Luger cases are more $ than range 9mm cases bought by the bucketful. All I have now is a local indoor range, and lead bullets are no more there, so delving into resizing bullets as well as buying the more expensive 309 pistol bullets. Used Lee lead cast bullets for a while, but the new rules....... I have come to settle on Unique for my 30 cal Lugers, perhaps not the best choice for clean, but I think the slower burning powder allows the action to work easily, sorta an orchestration rather than a quick jam, just my opinion there. |
The following member says Thank You to Rick W. for your post: |
05-05-2018, 09:18 AM | #6 |
User
Join Date: Jul 2003
Location: New York, NY
Posts: 1,575
Thanks: 2,124
Thanked 400 Times in 249 Posts
|
Hi,
Watch your O. A. L. to avoid jamming! Proper length for a round nose bullet should be 1.173 inches. See my post on "Determining Proper Cartridge O.A.L.", in this section as a Sticky, or some helpful hints. Also, either lead or FMJ bullets, up to .311 diameter, work in my 1920 Commercial just fine; so feel free to try some larger diameter ones. This should increase you selection as well. For powder, I'd give the medium/slow burners a try for accuracy, Power Pistol and HS-6 come to mind. Also, most of the commercial loading data out there is too light to even function a Luger, so be aware of this. Just some thoughts. PM me if you would like. Sieger |
05-06-2018, 09:11 AM | #7 | |
User
Join Date: Sep 2007
Posts: 1,225
Thanks: 2,679
Thanked 930 Times in 509 Posts
|
Quote:
|
|
|
|