my profile |
register |
faq |
search upload photo | donate | calendar |
08-19-2003, 01:12 PM | #1 |
New User
Join Date: Jul 2003
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
White-out?
This may be a rookie question, but I was wondering what others use to white-in the markings on their pistols. I've known some to use "White-Out" or similar office products, while I notice Mr. Shattuck sells lacquer sticks (?!).
Any suggestions or recommendations? |
08-19-2003, 01:15 PM | #2 |
Super Moderator
Eternal Lifer LugerForum Patron Join Date: Jun 2002
Location: North of Spokane, WA
Posts: 15,915
Thanks: 1,989
Thanked 4,506 Times in 2,080 Posts
|
The lacquer sticks is what many people use, but if you do a search on this forum for whiting in, and other search words, you'll find that some use chalk (a bit abrasive some say), white out, messy, lacquer sticks from brownells, and many other things.
Ed
__________________
Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV |
08-19-2003, 01:27 PM | #3 |
Lifer
Lifetime Forum Patron Join Date: Jun 2002
Location: The Capital of the Free World
Posts: 10,150
Thanks: 3,003
Thanked 2,304 Times in 1,096 Posts
|
If you can find white grease pencils in a stationary store like Staples... they will work too... and much cheaper.
__________________
regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL and are endowed by their Creator with certain UNALIENABLE rights, and among these are life, LIBERTY, and the pursuit of happiness..." |
08-19-2003, 02:13 PM | #4 |
User
Join Date: Jun 2002
Location: Utah, in the land of the Sleeping Rainbow
Posts: 1,457
Thanks: 0
Thanked 1 Time in 1 Post
|
I personally prefer the gold filling, I think it adds a touch of class. Nearly all stationary stores have them although there are several makers, three good ones are made by Pilot,Pen-Touch, and Sanford. They are like a very fine tip felt marker, or like a ball point pen depending upon the maker. Some remove with lighter fluid or solvent others you will have to use solvent or something like laquer thinner to get it off. Be sure to degrease the numbers and letters first.
__________________
Utah, where gun control means a steady trigger pull |
08-19-2003, 05:48 PM | #5 |
New User
Join Date: Jul 2003
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Thanks guys. I think I'll poke around the stationary store a bit and see what I come up with. Cheers!
|
|
|