my profile |
register |
faq |
search upload photo | donate | calendar |
07-21-2004, 11:15 AM | #1 |
User
Join Date: Feb 2004
Location: Orygun
Posts: 4,243
Thanks: 118
Thanked 245 Times in 150 Posts
|
1921Reichswehr Unit Marked DWM
This came in yesterday. I got it from a collector who is selling off his collection. Because of alittle glitch we had concerning a 1937 S/42 on GB. He offered me this at a greatly reduced price. Needless to say I took the offer. A 1921 unit marked DWM in approx. 95%. All matching except, un-numbered grips, and transitional wood bottom, blued tube mag. Firing pin and the hold-open, which may be armorers replacement, also match.Since I haven't been able to locate a copy of Weimar Lugers. I need help filling in the gaps. I'm assuming this is a Reichswehr Army issued pistol, considering the unit marks.
All opinions,eagerly accepted and welcome. Thanks! Ron Sorry Folks, I just realized I inadvertently put the wrong grips on it. These are off of my 1936 S/42. In the dreary confines of my laboratory. I got the grips mixed up. Thought these looked familiar.Correct grips are similar cond. Not as much figure in the wood. The unit marks are struck over a previous mark. A faint 15 can be seen under the R. a different style 5 under the 5 in 15, and a different style 3 under the 3. And a slanted colin between 15 and / .
__________________
I Still Need DWM side plate #49... if anyone runs across a nice one. What ~Rudyard Kipling~ said... |
07-21-2004, 11:19 AM | #2 |
Lifer
Lifetime Forum Patron Join Date: Jun 2002
Location: The Capital of the Free World
Posts: 10,154
Thanks: 3,003
Thanked 2,306 Times in 1,097 Posts
|
real NICE Ron, but the armorer was a little heavy handed on the unit mark stamps !
__________________
regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL and are endowed by their Creator with certain UNALIENABLE rights, and among these are life, LIBERTY, and the pursuit of happiness..." |
07-21-2004, 11:32 AM | #3 |
User
Join Date: Feb 2004
Location: Orygun
Posts: 4,243
Thanks: 118
Thanked 245 Times in 150 Posts
|
John, It appears that maybe he did'nt have it set on the mandrel correctly when the 15 was struck. And re-adjusted for the rest of the mark. If he was even using a mandrel. An old mark has been peened out, and overstruck. Could be a field
expedient marking? Thanks! Ron
__________________
I Still Need DWM side plate #49... if anyone runs across a nice one. What ~Rudyard Kipling~ said... |
07-22-2004, 09:04 PM | #4 |
User
Join Date: Jun 2002
Posts: 301
Thanks: 0
Thanked 0 Times in 0 Posts
|
Nice Weimar. Just like my 1920, except nicer, and I don't have any unit markings. The date stamping is in the same place as mine and of the same style. I have been told it's a property mark, but I now believe it's a date mark. The 1920 property marks I have seen were done with different dies and are usually uneven.
__________________
You can lead 'em to the water, but you can't make 'em drink. |
07-23-2004, 12:47 AM | #5 |
User
Join Date: Feb 2004
Location: Orygun
Posts: 4,243
Thanks: 118
Thanked 245 Times in 150 Posts
|
Saxman, The 1920 property stamps are a different size and configuration. And the numbers are usually spaced farther apart. Here for comparison are my 1921 Reichswehr and my 1921/1920 police re-work. You can see the obvious difference.
Kind of nice to find out you may have something alittle more special than you thought. Thanks for looking. Maybe if you could post a photo or two of yours? Ron
__________________
I Still Need DWM side plate #49... if anyone runs across a nice one. What ~Rudyard Kipling~ said... |
07-23-2004, 02:53 AM | #6 |
User
Join Date: Jun 2002
Location: Portland, Oregon
Posts: 3,902
Thanks: 0
Thanked 1,317 Times in 431 Posts
|
See Still's "Weimar Lugers" p.104 for an example of a 1920 dated, 1920 property marked Luger, shows the difference in maraking style.
--Dwight |
07-23-2004, 06:31 AM | #7 |
Super Moderator
Eternal Lifer LugerForum Patron Join Date: Jun 2002
Location: North of Spokane, WA
Posts: 15,933
Thanks: 2,032
Thanked 4,530 Times in 2,092 Posts
|
__________________
Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV |
07-23-2004, 09:43 AM | #8 |
User
Join Date: Feb 2004
Location: Orygun
Posts: 4,243
Thanks: 118
Thanked 245 Times in 150 Posts
|
Dwight and Ed, You'er right. I should have said "usually". That's the one thing about this hobby(madness/obsession). There are very rarely, if ever, any absolutes.I keep forgetting that.
Ron
__________________
I Still Need DWM side plate #49... if anyone runs across a nice one. What ~Rudyard Kipling~ said... |
07-23-2004, 09:49 AM | #9 |
Super Moderator
Eternal Lifer LugerForum Patron Join Date: Jun 2002
Location: North of Spokane, WA
Posts: 15,933
Thanks: 2,032
Thanked 4,530 Times in 2,092 Posts
|
Well, Ron, that is the major reason many people do not like to collect Weimar era, as there are toooooo many if's ands or buts.... So, they are always afraid they'll buy a piece of junk, that john smiffer told them was an acceptable "variation".
And all I meant by my piccies was to show the differences in the numbers. Mine has die stamps that are very much alike, and yet, there is no way that is possible. ed
__________________
Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV |
07-23-2004, 10:20 AM | #10 |
User
Join Date: Feb 2004
Location: Orygun
Posts: 4,243
Thanks: 118
Thanked 245 Times in 150 Posts
|
Ed, On the contrary! Thanks for bringing that fact to light. I am in the learning process, and just trying to ease the burden, on some of the moderators. Never hesitate to correct anything I say, if it's not quite accurate. Just be nice. I'm sensitive.
I'm not like the self proclaimed "Navy" expert, that Jan had to set staight on his forum, a few months ago. That guy could have done some serious harm,and cost some of the uninformed alot of money and grief.Myself included. Ron
__________________
I Still Need DWM side plate #49... if anyone runs across a nice one. What ~Rudyard Kipling~ said... |
07-27-2004, 09:03 PM | #11 |
User
Join Date: Jun 2002
Posts: 301
Thanks: 0
Thanked 0 Times in 0 Posts
|
I was wrong about the location of my '1920' stamp - it's centered in the chamber top. The numbers are imperfectly spaced but appear to be the same dies as Mr. Tinker's 1920 mark. I have the three eagles as per #31 in the proof marks, 'some 1920 police and military reworks'. There's another one on top of the barrel near the chamber. The barrel and frame numbers match, but have different suffixes (4084l, 4084h). Some external parts have been forced from '83' to '84'. Okay, you say, an obvious parts gun. Maybe, but there are still traces of straw where it should be and fire blue on the springs, and the pistol is rust-blued with matching color and wear on all parts. http://www.hunt101.com/?p=209654&c=548&z=1
__________________
You can lead 'em to the water, but you can't make 'em drink. |
07-27-2004, 11:39 PM | #12 |
User
Join Date: Feb 2004
Location: Orygun
Posts: 4,243
Thanks: 118
Thanked 245 Times in 150 Posts
|
Saxman, A force matched rework is'nt necessarily a parts gun. In my opinion a parts gun is one that somebody slapped together to have or sell a shooter. A rework, is a rebuild. And holds far more interest and value, and has history. Just my opinion.
Ron Adendum: Even Jan Still, considered one of the foremost experts and collectors in the world. Is as equally as facsinated by the history of a piece. As he is by the quality and condition. Just look at his Imperial Lugers book. It's as much a history book as it is a/the, top notch reference for WWI era Lugers. History is half the obsession for alot of collectors. Like Ed and me.
__________________
I Still Need DWM side plate #49... if anyone runs across a nice one. What ~Rudyard Kipling~ said... |
07-27-2004, 11:48 PM | #13 |
Super Moderator
Eternal Lifer LugerForum Patron Join Date: Jun 2002
Location: North of Spokane, WA
Posts: 15,933
Thanks: 2,032
Thanked 4,530 Times in 2,092 Posts
|
My opinion too. Period bluing, same stamps, acceptance marks or proofs, you have to take it all together and decide if it is a rebuild/rework or bubba!
And Saxman, I'll give you a low-ball parts gun shooter price for yours! Ed
__________________
Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV |
07-28-2004, 11:07 AM | #14 |
User
Join Date: Jun 2002
Posts: 301
Thanks: 0
Thanked 0 Times in 0 Posts
|
Thanks for the opinions. I'm starting to think it's a Weimar rework rather than a 'put together'. Or, should I say, maybe it was 'put together' by the government out of parts/sub-assemblies not previously used. I have been thinking of refinishing it, but now perhaps I'll leave it alone. Doesn't look too bad. The take-down switch and mag release have been blued, so maybe I'll re-straw them. It has no cuts on it for extra safeties, so maybe it was done for the Reichswehr. These '1920s' are definitely hard to figure sometimes, and certainly have a history as you say.
__________________
You can lead 'em to the water, but you can't make 'em drink. |
07-28-2004, 03:05 PM | #15 |
User
Join Date: Feb 2004
Location: Orygun
Posts: 4,243
Thanks: 118
Thanked 245 Times in 150 Posts
|
Saxman, I think it's just a good honest rebuild from what I have seen. The safety and take down could have been replaced by an armorer during WWII. Some of these pistols, if not all were issued and re-issued, clear up until 1945.
Ron
__________________
I Still Need DWM side plate #49... if anyone runs across a nice one. What ~Rudyard Kipling~ said... |
07-28-2004, 11:39 PM | #16 |
User
Join Date: Jun 2002
Posts: 301
Thanks: 0
Thanked 0 Times in 0 Posts
|
I'll buy that. Everything is properly fitted, very little play in the upper-to-lower and everything works. The barrel witness mark is perfect and the one on the front sight is lined up. I got this one for $450 a couple years ago, and it looks like I could have done worse. I really appreciate all the insights and information you guys have posted. This is probably the most civilized and helpful gun board there is. So, what's the consensus? Is the '1920' a date or property mark?
__________________
You can lead 'em to the water, but you can't make 'em drink. |
07-29-2004, 11:15 AM | #17 |
Lifer
Lifetime Forum Patron Join Date: Jun 2002
Location: The Capital of the Free World
Posts: 10,154
Thanks: 3,003
Thanked 2,306 Times in 1,097 Posts
|
Because of the unevenness of the number spacing, it would be my OPINION, that this "1920" is a property mark on an otherwise non-dated receiver...
I would be interested to know how others feel about this theory... I can't say that I have ever seen a "date" stamp with number spacing so carelessly applied, but a large number of the "property" stamps for what are incorrectly called "double-dates" Lugers do exhibit this workmanship. ...Sort of like the difference on how cars assembled in the middle of the week seem to be carefully made and most of the lemons are produced on Mondays and Fridays...
__________________
regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL and are endowed by their Creator with certain UNALIENABLE rights, and among these are life, LIBERTY, and the pursuit of happiness..." |
07-29-2004, 12:21 PM | #18 |
Super Moderator
Eternal Lifer LugerForum Patron Join Date: Jun 2002
Location: North of Spokane, WA
Posts: 15,933
Thanks: 2,032
Thanked 4,530 Times in 2,092 Posts
|
Its the "2" that makes me think it is a Reichswehr stamping and not a date... I believe that date stamps were not individual stamps, or if they were, they were held together as they stamped, but property stamps were done by each armorer, so the variation is higher.
Ed
__________________
Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV |
07-29-2004, 12:39 PM | #19 |
RIP
Join Date: Jun 2002
Location: Ca.
Posts: 2,141
Thanks: 8
Thanked 89 Times in 54 Posts
|
Ed your right, this is not a date stamp. Ron, I believe that in the Weimar period to much is attributed to correct period armorer rework then is due. If it is without rework type proofing, E/6..C/RC and such, the gun should be considered and graded less the 100% correct. Too many Lugers are slapped together, and unsupecting buyers are taken, one must be wary, and unwilling to accept less. Now on the other hand, at $450 it was a deal, a good shooter gun deal.
|
07-29-2004, 01:01 PM | #20 |
User
Join Date: Feb 2004
Location: Orygun
Posts: 4,243
Thanks: 118
Thanked 245 Times in 150 Posts
|
Howard, I will submit to your superior knowledge,and expertise as far as the subject of Lugers. However, I still feel that the uniform finish wear and close fit of the components, belies the parts gun theory. It still looks like a period rework to me. If it is a parts gun, it was assembled very proffessionaly. And with great care in matching up the parts. And if refinished? Was done along time ago. Just my opinion, based on 40 yrs of owning and studying various old firearms. I cannot claim to be a Luger expert, and would not proport to be.
Ron
__________________
I Still Need DWM side plate #49... if anyone runs across a nice one. What ~Rudyard Kipling~ said... |
|
|