![]() |
my profile |
register |
faq |
search upload photo | donate | calendar |
![]() |
#1 |
Lifer
Lifetime Forum Patron Join Date: Jun 2002
Location: Chandler Arizona
Posts: 3,499
Thanks: 1,318
Thanked 3,626 Times in 999 Posts
|
![]()
Hi to all! just got to thinking, there are a considerable number of Mec-Gar magazines out in the field, and my recollection of their performance and durability has always been, not as good as an original, but close?
Well, the evolution of the magazine has something to do with how I now feel about the magazines? Initially I first came in contact with Mec-Gar Luger mags that were an industrial chrome or nickel finish, and a black plastic bottom. The mags were well made, terribly sprung, and had a killing design flaw in that the follower guide relief channel running vertical on the follower slot side, was a bit shy of reaching the slot, which in turn, allowed the coil spring to plunge forwards into the front of the mag tube, stopping all!!!!! These are still around, although seldom seen or used for that issue alone, much less the nasty strong spring... The next evolution corrected this problem, and now you find the proper bit of flat surface on the back edge of the slot, reinforcing both the vertical relief, and the rear edge of the slot. The magazine shells came in blue or nickel and were heat treated which instantly made it theoretically better than any previous Luger mag ever made. The issues with this generation of mag were plenty, and consisted of, plastic bottoms blowing out, spring taking a set, and worst of all, the metal follower would occasionally gall the interior sheet metal and cause malfunctions, not unlike original mags that suffered the same... I had great success repairing and up grading these mags until.... Tah Dah.... The latest Mec-Gar magazine produced... Still had the heat treated magazine shell, but here is where the similarity to the old mags ended! The follower is a nylon reinforced plastic, tougher than all hell... Mag bottom same stuff.. No galling and no breaking, the mags are nearly indestructible! They are easily recognized by the ring stepped follower button, not the checkered button of earlier units. Shooters love them, collectors hate them... ![]() ![]() ![]() |
![]() |
![]() |
The following 27 members says Thank You to G.T. for your post: |
![]() |
#2 |
User
Join Date: Jun 2002
Location: Byron, Georgia
Posts: 1,692
Thanks: 789
Thanked 1,670 Times in 548 Posts
|
![]()
Nice write up GT. All I ever use in my shooter Lugers are Mec-Gar mags and I've never had a problem with any of them Last ones I bought came from CDNN who had them for $20 each and that was only a few months ago. Their prices have since gone up.
It's my understanding that Mec-Gar makes OEM magazines for many different gun manufacturers so it stands to reason that they'd want to "get it right". I appreciate a company that recognizes a problem and then fixes it. |
![]() |
![]() |
The following 6 members says Thank You to Doubs for your post: |
![]() |
#3 |
Patron
LugerForum Patron Join Date: Mar 2011
Location: Az.
Posts: 2,282
Thanks: 2,702
Thanked 969 Times in 714 Posts
|
![]()
Thanx for the informative write-up. I looked through my Luger mags, and find that I have a few from each generation. A number of my mags GT has upgraded with his springs, bases, etc. At this point, I believe that all of my Mec-Gar mags are functional in MY Lugers.
__________________
Need DWM breechblock #21 |
![]() |
![]() |
![]() |
#4 | |
Super Moderator
Eternal Lifer LugerForum Patron Join Date: Jun 2002
Location: North of Spokane, WA
Posts: 15,924
Thanks: 2,012
Thanked 4,517 Times in 2,087 Posts
|
![]() Quote:
Thanks GT for the nice write up |
|
![]() |
![]() |
The following 3 members says Thank You to Edward Tinker for your post: |
![]() |
#6 |
User
Join Date: Jun 2020
Location: Meridian, Idaho USA
Posts: 5
Thanks: 0
Thanked 30 Times in 3 Posts
|
![]()
GT. I always pushed and used the MerGAR when i shoot my Lugers have not purchased any for sometime. Will see. David_O
|
![]() |
![]() |
The following 3 members says Thank You to David_O for your post: |
![]() |
#7 |
User
Join Date: Feb 2013
Location: Somewhere in Northern Italy
Posts: 2,646
Thanks: 1,082
Thanked 1,783 Times in 1,007 Posts
|
![]()
GT thanks for the interesting writing.
All the times that in the past I took a Luger at the range I've always used a MEC-GAR magazine but I never had issues.
__________________
"Originality can't be restored and should be at the top of any collector's priority list. |
![]() |
![]() |
![]() |
#8 |
User
Join Date: Jan 2006
Location: Down The Shore
Posts: 245
Thanks: 1
Thanked 6 Times in 4 Posts
|
![]()
Thanks for the info. I just bought one.
__________________
The very atmosphere of firearms anywhere and everywhere restrains evil interference - they deserve a place of honor with all that's good. George Washington |
![]() |
![]() |
The following member says Thank You to shadow for your post: |
![]() |
#9 |
User
Join Date: Jan 2021
Location: NEW JERSEY
Posts: 143
Thanks: 117
Thanked 176 Times in 70 Posts
|
![]()
Thanks GT.
i check all my magazines for smoothness of follower travel by using something long and not metallic like a chopstick to push the follower in all the way noticing if there any kinks or hesitation both ways. Moving it down with the button seems to offset the vector of forces and doesn,t mimic what the rounds do to the follower + the button seems to create more friction this way giving a false reading. I find Mec Gar to be extremely well made, I only have one, seemingly the last generation. I,m a big fan of nylon as a strategic material. There are so many versions of it impregnated with additives of different qualities: lubricants, reinforcement etc. if I,m not mistaking Glock like pistol frames are based in glass fiber filled nylon? |
![]() |
![]() |
The following member says Thank You to STEINBVG for your post: |
![]() |
#10 |
User
Join Date: Jan 2021
Location: NEW JERSEY
Posts: 143
Thanks: 117
Thanked 176 Times in 70 Posts
|
![]()
I got a second Mec Gar magazine and it loos different from my 1t.
The 1 one seems exactly like GT described gen 3, smooth shiny black shell with Made in Italy on it, Nylon follower and floor, Target like button. The second magazine came with dull black shell, no Made in Italy, Plastic bottom and aluminum follower. Checkered button. It seems to fit nicer though in my Interarms Luger[ I had to widen the 1t one at the area of the catch ] It seems to function well. I wonder what generation this one, i hope it's no one of those poorly designed early ones. I will post the pics later today.
__________________
Happy to have found the Gevarm and Voere. |
![]() |
![]() |
![]() |
#11 | |
User
Join Date: May 2019
Location: Northern Idaho
Posts: 84
Thanks: 2
Thanked 34 Times in 22 Posts
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#12 | |
User
Join Date: Jan 2021
Location: NEW JERSEY
Posts: 143
Thanks: 117
Thanked 176 Times in 70 Posts
|
![]() Quote:
__________________
Happy to have found the Gevarm and Voere. |
|
![]() |
![]() |
![]() |
#13 |
Moderator
Lifetime LugerForum Patron Join Date: Oct 2002
Location: Europe
Posts: 5,053
Thanks: 1,036
Thanked 3,987 Times in 1,205 Posts
|
![]()
Anyone come across Interarms marked MecGars?
I have one with a Mauser style banner with Interarms on the spine. Never seen another one. Last edited by Vlim; 05-28-2021 at 10:08 AM. |
![]() |
![]() |
The following 5 members says Thank You to Vlim for your post: |
![]() |
#14 |
User
Join Date: Jan 2006
Location: Down The Shore
Posts: 245
Thanks: 1
Thanked 6 Times in 4 Posts
|
![]()
Thanks G.T.! I can not thank you enough for starting this thread! I tried my new Mec-Gar luger magazine today and bought a second one as soon as I got home.
I just put half a box (50 rounds) of 115gr white box Winchester through my luger without a single hiccup. My luger performed flawlessly. The other thing I noticed is that my ejected brass isn’t damaged anymore. In the past the spent brass usually had a big ding near the opening. Thanks again!! ![]()
__________________
The very atmosphere of firearms anywhere and everywhere restrains evil interference - they deserve a place of honor with all that's good. George Washington |
![]() |
![]() |
The following 2 members says Thank You to shadow for your post: |
![]() |
#15 |
User
Join Date: Mar 2019
Location: Wrong side of the Delaware river
Posts: 300
Thanks: 207
Thanked 432 Times in 170 Posts
|
![]()
6 left for $40 each
https://www.cdnnsports.com/luger-p08...ne-mecgar.html I got mine from CDNN a couple of years ago - all good BETTER deal $33 and 21 available https://www.opticsplanet.com/mec-gar...-magazine.html |
![]() |
![]() |
![]() |
#16 |
User
Join Date: Oct 2005
Location: Texas
Posts: 52
Thanks: 91
Thanked 36 Times in 18 Posts
|
![]()
Better deal at Greg Cote. Appear to be in stock.
https://gregcotellc.com/cart/luger-m...gazines-c-128/ |
![]() |
![]() |
![]() |
#17 |
Lifer
Lifetime Forum Patron Join Date: Apr 2015
Location: Austin, Texas
Posts: 698
Thanks: 2,062
Thanked 573 Times in 307 Posts
|
![]()
MEC-GAR also sells direct from their web site
Blue $44 (out of stock today) Nickel $49 I also found another odd 3rd party brand called MAGLUG, but the magazine appears to be a late model unmarked MEC-GAR magazine!? Strange, but it was $30 at a local gun store. |
![]() |
![]() |
![]() |
#18 |
User
Join Date: Aug 2023
Posts: 66
Thanks: 10
Thanked 49 Times in 30 Posts
|
![]()
As of this writing, MecGar P.08 blued magazines are available on Ebay from several vendors for $32.17 w/free shipping. Nickel mags are a couple of dollars more.
-Bob |
![]() |
![]() |
![]() |
|
|