my profile |
register |
faq |
search upload photo | donate | calendar |
07-15-2018, 06:08 PM | #21 |
User
Join Date: Jul 2018
Posts: 12
Thanks: 0
Thanked 5 Times in 4 Posts
|
Here are a few pics.
|
07-15-2018, 06:11 PM | #22 |
User
Join Date: Jul 2018
Posts: 12
Thanks: 0
Thanked 5 Times in 4 Posts
|
A few pics.
|
The following 2 members says Thank You to Matt108 for your post: |
07-15-2018, 08:59 PM | #23 |
Moderator
Lifetime Forum Patron Join Date: Jun 2002
Location: Arizona/Colorado
Posts: 7,771
Thanks: 4,928
Thanked 3,124 Times in 1,434 Posts
|
I'm not an expert, especially on carbine lugers, just for your reference the one pictured below not long ago was sold here for almost 19,000 $ although the stock is not matching.
The carbine mentioned in post#18 brought a crazy price IMO. The stock is not an original carbine, looks made of pine and totally aftermarket. That stock would shave 5-8000 IMO. The original post..while my estimate of $1200 might seem generous..it could be very difficult to re create this long barreled carbine for much less?
__________________
Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know." |
The following member says Thank You to lugerholsterrepair for your post: |
07-15-2018, 09:36 PM | #24 | |
Lifer
Lifetime Forum Patron Join Date: Feb 2009
Location: ...on the 'ol Erie Canal...
Posts: 8,182
Thanks: 1,400
Thanked 4,442 Times in 2,330 Posts
|
Quote:
Not enough pics to tell what the rear/barrel sight is. A gun show would be the perfect place to sell it. To a new enthusiast.
__________________
I like my coffee the way I like my women... ...Cold and bitter... |
|
07-16-2018, 12:35 PM | #25 |
Moderator
Lifetime Forum Patron Join Date: Jun 2002
Location: Arizona/Colorado
Posts: 7,771
Thanks: 4,928
Thanked 3,124 Times in 1,434 Posts
|
I think that would depend on how much the 'smith' valued his time. There is doing it yourself and there is having it done. Regardless..parts alone would be more than $1200? Basic pistol, barrel, etc.
__________________
Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know." |
07-16-2018, 01:57 PM | #26 |
Lifer
Lifetime Forum Patron Join Date: Jun 2002
Location: The Capital of the Free World
Posts: 10,154
Thanks: 3,003
Thanked 2,306 Times in 1,097 Posts
|
Definitely a one-of-a-kind homebrew. Shooter value in my opinion, no collector value left. The mechanical work is unusual but certainly functional... It is worth whatever someone is willing to pay for it... but I certainly would never consider a value above the $1200 mentioned earlier...and probably less.
Just my $0.02... spend it wisely.
__________________
regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL and are endowed by their Creator with certain UNALIENABLE rights, and among these are life, LIBERTY, and the pursuit of happiness..." |
07-16-2018, 02:47 PM | #27 |
Patron
LugerForum Patron Join Date: Mar 2011
Location: Az.
Posts: 2,291
Thanks: 2,708
Thanked 972 Times in 717 Posts
|
Though the "carbine" is a one-off piece, if it functions reliably, it could make for a fun range gun, and conversation piece. That stock is a very nice piece of wood. Someone spent some time and $$$ to produce this end product.
__________________
Need DWM breechblock #21 |
07-16-2018, 03:55 PM | #28 |
User
Join Date: Jun 2002
Posts: 339
Thanks: 81
Thanked 359 Times in 198 Posts
|
Matt,
Certainly an interesting item. I kinda have a hard time thinking that it once was a carbine from the old world in looking at some of the attachments to the firearm. I would surmise that it was built from various parts post 16 inch barrel time, one would think that earlier than that a modification would not have included extra length on the barrel fwiw. It appears that the forearm and buttstock was made from one piece of wood. Fairly nicely done too. The forend hanger is affixed to the triggerguard with a small amount of contract, if silver soldered, one might wonder about how long it will stay. If welded, tis more better. Original forend hangers have a lot of wrap around on the triggerguard for strength and area of adhesion. At least the forend does not contact the barrel and add weight/resistance for function like in some later renditions sold to kids. Wrap around trigger hangers to the guard can hide the serial, which is an issue to some folks, for a newly manufactured firearm with stock..........or otherwise. The buttstock attaching iron is probably homebrew, not easy to make; but easier than doing the curve in a rear attaching iron. I suspect that if the locking and alignment stud is not fitted well, that the stock will pivot slightly axially when lashed up. One would suspect not much collector value at least from a non collector's point of view. As a shooter, function counts for a lot; even with some bad cosmetics. This one is not all that bad in appearance, better than some I reckon. Some work in the carbine pictured, but hard to see a lot of money in it to buy it outright. Kinda one of those things, it is worth what you wanna pay for it. I would have a hard time putting 700 in it, but just one opinion in the many here. If it works and guess it does from the posts, tis lots better than the carbine kits of the 50-80's from the shooter's point of view. Cost to make like that is another book, would take a while to figure that out from some point of view. Some folks have done it recently actually here on this forum. Thanks for showing it, has some innovation and fair craftsmanship to it all in all. Rick W. |
07-17-2018, 06:19 PM | #29 |
User
Join Date: Jul 2018
Posts: 12
Thanks: 0
Thanked 5 Times in 4 Posts
|
I appreciate everyone’s time and knowledge! If anyone ever has a question regarding Japanese swords, please don’t hesitate to contact me!
Thanks again! Matt |
The following member says Thank You to Matt108 for your post: |
|
|