Remove extractor?

hayhugh · 09-22-2014, 02:50 PM

Waiting for delivery of auction bought 1900 Swiss contract luger. It has unstrawed extractor. Just purchased original strawed ejector from the Lugerdoc. 1908 lugers have pin to hold extractor in place. How is orginal 1900 extractor removed and replaced. Don't want to screwup new or old extractor. Any info gladly accepted. Thank you, Hugh

Ron Wood · 09-22-2014, 04:38 PM

The 1900 extractor is really just a spring. The rear of the extractor is a pin that fits into the breech block and is held in place by the spring tension on a lug on the lower side of the extractor. To remove the extractor, you have to use a tool, preferably something non-marring like a wood dowel shaped like a screwdriver on the end, and lift up on the forward end of the extractor (the part that grasps the cartridge) until the lug is free and you can slide the extractor forward to remove it. A risky process on an old and/or brittle extractor, but that is the way you do it.

hayhugh · 09-22-2014, 05:17 PM

Thank you Ron, I kind of thought that would be the way, but wanted verification.

sheepherder · 09-22-2014, 05:21 PM

Ron, this procedure is probably in the FAQ, but IMHO it would make a good 'sticky'.

BTW: The Nambu Type 14 extractor is removed the same way.

John Sabato · 09-23-2014, 11:27 AM

I thought all you had to do to remove a nambu extractor was to shoot the gun!

Sorry... couldn't resist the opportunity!

Lugerdoc · 09-23-2014, 12:51 PM

I usually use a flat blade screw driver, placing it under the lip of extractor and pushing it up high enough for the stud on the bottom to clear the breech block and forward to remove. TH

LU1900 · 09-24-2014, 10:08 PM

With alls works you do on it sheepherder , you forgot the C96 !

09-22-2014, 02:50 PM	#1
hayhugh User Join Date: Oct 2013 Location: Florida/Penna Posts: 896 Thanks: 856 Thanked 513 Times in 275 Posts	Remove extractor? Waiting for delivery of auction bought 1900 Swiss contract luger. It has unstrawed extractor. Just purchased original strawed ejector from the Lugerdoc. 1908 lugers have pin to hold extractor in place. How is orginal 1900 extractor removed and replaced. Don't want to screwup new or old extractor. Any info gladly accepted. Thank you, Hugh

09-22-2014, 04:38 PM	#2
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 7,022 Thanks: 1,090 Thanked 5,178 Times in 1,703 Posts	The 1900 extractor is really just a spring. The rear of the extractor is a pin that fits into the breech block and is held in place by the spring tension on a lug on the lower side of the extractor. To remove the extractor, you have to use a tool, preferably something non-marring like a wood dowel shaped like a screwdriver on the end, and lift up on the forward end of the extractor (the part that grasps the cartridge) until the lug is free and you can slide the extractor forward to remove it. A risky process on an old and/or brittle extractor, but that is the way you do it. Attached Images __________________ If it's made after 1918...it's a reproduction Last edited by Ron Wood; 09-22-2014 at 05:24 PM.

09-22-2014, 05:21 PM	#4
sheepherder Lifer Lifetime Forum Patron Join Date: Feb 2009 Location: ...on the 'ol Erie Canal... Posts: 8,183 Thanks: 1,400 Thanked 4,442 Times in 2,330 Posts	Ron, this procedure is probably in the FAQ, but IMHO it would make a good 'sticky'. BTW: The Nambu Type 14 extractor is removed the same way. __________________ I like my coffee the way I like my women... ...Cold and bitter...

09-23-2014, 11:27 AM	#5
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,154 Thanks: 3,003 Thanked 2,306 Times in 1,097 Posts	I thought all you had to do to remove a nambu extractor was to shoot the gun! Sorry... couldn't resist the opportunity! __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

09-23-2014, 12:51 PM	#6
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 736 Times in 483 Posts	I usually use a flat blade screw driver, placing it under the lip of extractor and pushing it up high enough for the stud on the bottom to clear the breech block and forward to remove. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

09-22-2014, 05:17 PM	#3
hayhugh User Join Date: Oct 2013 Location: Florida/Penna Posts: 896 Thanks: 856 Thanked 513 Times in 275 Posts	Thank you Ron, I kind of thought that would be the way, but wanted verification.

09-24-2014, 10:08 PM	#7
LU1900 User Join Date: Jul 2003 Location: FRANCE Posts: 908 Thanks: 41 Thanked 469 Times in 197 Posts	With alls works you do on it sheepherder , you forgot the C96 ! __________________ Best regards from France...Patrice https://www.fichier-pdf.fr/2016/03/1...nd-snail-drum/