BYF 41 Luger

gimmejr · 07-14-2013, 08:19 PM

Hello all I just got this from my dad today, its been probably 30 years since I've seen it. He picked it up in Japan when he was serving in the Korea war. He did a number on it with it being reblued, new grips and a few other things done to it. He couldn't remember if he had the Eagle engraved or not and I haven't found any pics on this forum to inform me either way. I haven't disassembled it yet but all the numbers that I can see seem to match. Didn't see any proof marks and that got me curious. Any further info anyone can give would be appreciated.

alanint · 07-14-2013, 09:14 PM

A classic, GI post war rework for personal taste. Although now a shooter, it is one dandy of a shooter!

Treasure it as your Dad's legacy.

mgvince · 07-14-2013, 10:07 PM

I have a byf 41, ns, series. It has been highly buffed, acceptance stamps buffed off. And high polish blued.

It's a great shooter.

gimmejr · 07-14-2013, 10:22 PM

So shooting shouldn't be a problem then?

alanint · 07-14-2013, 10:31 PM

Shoot away to your heart's content!

There is nothing that cannot be replaced on this pistol that would hurt its value.

Edward Tinker · 07-14-2013, 11:20 PM

I like the grips

mrerick · 07-14-2013, 11:50 PM

The refinish and grip replacement takes it out of collector interest.

The good news is that you have a family heirloom that you can shoot without concern!

These Mauser made lugers are very high quality. Good metallurgy. Accurate shooters.

Read up on them here, and remember that they are not modern handguns with extensive safety features. Always follow the safe handling rules, and double check that it's unloaded before each disassembly. The upper by itself can be a functioning firearm without the frame.

Are the grips real bone or ivory? If so they have some intrinsic value...

Marc

DavidJayUden · 07-14-2013, 11:54 PM

While we say it is OK to shoot it, it is always a good idea to have it inspected by a competent gunsmith before firing.
End of legal sermon.
dju

John Sabato · 07-15-2013, 11:17 AM

Enjoy the heck out of it. I owned a byf 41 and it was a TACK driver!

gimmejr · 07-15-2013, 11:21 AM

The grips are unfortunately cracked up by the safety. You see the broken off part in the pic. He also had his name inlayed in silver on the forward part of the grip. Whoever did it didn't do a very good job. It came with one mag with a few 9mm rounds and 1 .30 round. I thought that was strange until I came here and started looking around.

Zorba · 07-15-2013, 12:15 PM

Don't shoot that .30!

rhuff · 07-15-2013, 04:19 PM

If you plan to shoot and enjoy this Luger, stick with standard velocity ammo like Winchester white box 115gr FMJ or PMC 115gr FMJ. NO +P, +P+, or Nato 9mm ammo. Enjoy!!

ithacaartist · 07-16-2013, 10:27 PM

Welcome, and thanks for showing your family treasure. Here's how to tell if your grips are ivory, bone, or plastic.

Do the Hot Pin Test (from http://www.wikihow.com/Tell-Ivory-from-Bone )

1
Heat a straight pin. Hold it over a candle flame or a lighter flame for a few seconds until it gets quite hot. You can use any piece of metal, but a pin is a good choice since you don't want to create a mark on the item you're testing.
2
Hold the pin to the surface of the item. Choose a discreet spot so you don't end up leaving a mark or a dent (although if the item is ivory, this won't happen).
3
Smell the place where you touched the item with the hot pin. If the item is ivory, it should have no scent that wasn't there before. If it's bone, it will smell faintly of burning hair.
True ivory will not get damaged by this experiment, since it is hard and strong enough to resist the heat. However, if the object you're testing happens to be made of plastic, the hot needle will make a slight dent. Since some plastics (such as Bakelite) have as much or more value than ivory, you may not want to try the hot needle test until you know for sure that what you have is not plastic.

gimmejr · 07-17-2013, 11:03 AM

Thanks for info on the ivory check, maybe Ill take the grips off and test underneath.

zombeer · 07-18-2013, 09:14 PM

wish my shooter looked that good....

lugerholsterrepair · 07-19-2013, 01:05 PM

Marc..These Mauser made lugers are very high quality. Good metallurgy.

In general and mostly I agree with this BUT I have seen 2 different mausers that had cracked bolts, toggles and top cannons like they were frozen and smacked with a hammer. VERY fine cracks and lots of them. So fine they could not be seen except with good light and close inspection. These 2 examples told me the metallurgy or heat treating or both could sometimes go wrong on Mausers.

This is just an aside..of course MOST Mauser Luger's are just what Marc says..It sure was interesting to see though.

it is always a good idea to have it inspected by a competent gunsmith before firing. IF you can find one! I think in Kaliphornia they all starved to death.

Zorba · 07-19-2013, 01:16 PM

Quote:

Originally Posted by lugerholsterrepair

I think in Kaliphornia they all starved to death.

Actually, their business is BOOMING. For the same reasons everywhere else.

lugerholsterrepair · 07-19-2013, 01:38 PM

Well, That's good to know!

Zorba · 07-19-2013, 04:51 PM

Yea - my first choice LGS to handle the FFL for my Luger couldn't do it. Told me he was totally OUT of storage space for incoming FFL transfers. He was even taking stuff home at nite! But his shop is pretty much a hole in the wall.

So the "big" LGS could do the FFL - every time I'm in there, the place is PACKED. And it is a BIG gun shop! They tell me they're selling guns like crazy.

The small guy is doing some work on a revolver for me, and he's backed up for months...

gimmejr · 07-19-2013, 09:22 PM

Itll probably be busy till the end of the year when all the new laws they are passing go into effect.

07-14-2013, 08:19 PM	#1
gimmejr User Join Date: Jul 2013 Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts	BYF 41 Luger Hello all I just got this from my dad today, its been probably 30 years since I've seen it. He picked it up in Japan when he was serving in the Korea war. He did a number on it with it being reblued, new grips and a few other things done to it. He couldn't remember if he had the Eagle engraved or not and I haven't found any pics on this forum to inform me either way. I haven't disassembled it yet but all the numbers that I can see seem to match. Didn't see any proof marks and that got me curious. Any further info anyone can give would be appreciated.

07-14-2013, 11:50 PM	#7
mrerick Super Moderator - Patron LugerForum Life Patron Join Date: Dec 2009 Location: Eastern North Carolina, USA Posts: 3,909 Thanks: 1,374 Thanked 3,110 Times in 1,510 Posts	The refinish and grip replacement takes it out of collector interest. The good news is that you have a family heirloom that you can shoot without concern! These Mauser made lugers are very high quality. Good metallurgy. Accurate shooters. Read up on them here, and remember that they are not modern handguns with extensive safety features. Always follow the safe handling rules, and double check that it's unloaded before each disassembly. The upper by itself can be a functioning firearm without the frame. Are the grips real bone or ivory? If so they have some intrinsic value... Marc __________________ Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war.

07-15-2013, 11:17 AM	#9
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,154 Thanks: 3,003 Thanked 2,306 Times in 1,097 Posts	Enjoy the heck out of it. I owned a byf 41 and it was a TACK driver! __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

07-16-2013, 10:27 PM	#13
ithacaartist Twice a Lifer Lifetime Forum Patron Join Date: Mar 2011 Location: Atop the highest hill in Schuyler County NY Posts: 3,346 Thanks: 7,275 Thanked 2,578 Times in 1,365 Posts	Welcome, and thanks for showing your family treasure. Here's how to tell if your grips are ivory, bone, or plastic. Do the Hot Pin Test (from http://www.wikihow.com/Tell-Ivory-from-Bone ) 1 Heat a straight pin. Hold it over a candle flame or a lighter flame for a few seconds until it gets quite hot. You can use any piece of metal, but a pin is a good choice since you don't want to create a mark on the item you're testing. 2 Hold the pin to the surface of the item. Choose a discreet spot so you don't end up leaving a mark or a dent (although if the item is ivory, this won't happen). 3 Smell the place where you touched the item with the hot pin. If the item is ivory, it should have no scent that wasn't there before. If it's bone, it will smell faintly of burning hair. True ivory will not get damaged by this experiment, since it is hard and strong enough to resist the heat. However, if the object you're testing happens to be made of plastic, the hot needle will make a slight dent. Since some plastics (such as Bakelite) have as much or more value than ivory, you may not want to try the hot needle test until you know for sure that what you have is not plastic. __________________ "... Liberty is the seed and soil, the air and light, the dew and rain of progress, love and joy."-- Robert Greene Ingersoll 1894

07-18-2013, 09:14 PM	#15
zombeer User Join Date: Dec 2011 Location: New Hampshire Posts: 36 Thanks: 16 Thanked 3 Times in 3 Posts	wish my shooter looked that good.... __________________ Illegitimis nil carborundum

07-14-2013, 09:14 PM	#2
alanint User Join Date: Mar 2008 Location: Marco Island, Florida Posts: 4,867 Thanks: 1,685 Thanked 1,916 Times in 1,192 Posts	A classic, GI post war rework for personal taste. Although now a shooter, it is one dandy of a shooter! Treasure it as your Dad's legacy.

07-14-2013, 10:07 PM	#3
mgvince Patron LugerForum Patron Join Date: Jun 2011 Posts: 21 Thanks: 0 Thanked 1 Time in 1 Post	I have a byf 41, ns, series. It has been highly buffed, acceptance stamps buffed off. And high polish blued. It's a great shooter.

07-14-2013, 10:22 PM	#4
gimmejr User Join Date: Jul 2013 Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts	So shooting shouldn't be a problem then?

07-14-2013, 10:31 PM	#5
alanint User Join Date: Mar 2008 Location: Marco Island, Florida Posts: 4,867 Thanks: 1,685 Thanked 1,916 Times in 1,192 Posts	Shoot away to your heart's content! There is nothing that cannot be replaced on this pistol that would hurt its value.

07-14-2013, 11:20 PM	#6
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,933 Thanks: 2,032 Thanked 4,530 Times in 2,092 Posts	I like the grips

07-14-2013, 11:54 PM	#8
DavidJayUden Patron LugerForum Patron Join Date: Nov 2008 Posts: 4,047 Thanks: 578 Thanked 1,414 Times in 887 Posts	While we say it is OK to shoot it, it is always a good idea to have it inspected by a competent gunsmith before firing. End of legal sermon. dju

07-15-2013, 11:21 AM	#10
gimmejr User Join Date: Jul 2013 Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts	The grips are unfortunately cracked up by the safety. You see the broken off part in the pic. He also had his name inlayed in silver on the forward part of the grip. Whoever did it didn't do a very good job. It came with one mag with a few 9mm rounds and 1 .30 round. I thought that was strange until I came here and started looking around.

07-15-2013, 12:15 PM	#11
Zorba User Join Date: Feb 2013 Location: Merritt Island, Fl Posts: 952 Thanks: 777 Thanked 527 Times in 290 Posts	Don't shoot that .30!

07-15-2013, 04:19 PM	#12
rhuff Patron LugerForum Patron Join Date: Mar 2011 Location: Az. Posts: 2,291 Thanks: 2,709 Thanked 972 Times in 717 Posts	If you plan to shoot and enjoy this Luger, stick with standard velocity ammo like Winchester white box 115gr FMJ or PMC 115gr FMJ. NO +P, +P+, or Nato 9mm ammo. Enjoy!!

07-17-2013, 11:03 AM	#14
gimmejr User Join Date: Jul 2013 Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts	Thanks for info on the ivory check, maybe Ill take the grips off and test underneath.

07-19-2013, 01:05 PM	#16
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,772 Thanks: 4,933 Thanked 3,124 Times in 1,434 Posts	Marc..These Mauser made lugers are very high quality. Good metallurgy. In general and mostly I agree with this BUT I have seen 2 different mausers that had cracked bolts, toggles and top cannons like they were frozen and smacked with a hammer. VERY fine cracks and lots of them. So fine they could not be seen except with good light and close inspection. These 2 examples told me the metallurgy or heat treating or both could sometimes go wrong on Mausers. This is just an aside..of course MOST Mauser Luger's are just what Marc says..It sure was interesting to see though. it is always a good idea to have it inspected by a competent gunsmith before firing. IF you can find one! I think in Kaliphornia they all starved to death. __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

07-19-2013, 01:38 PM	#18
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,772 Thanks: 4,933 Thanked 3,124 Times in 1,434 Posts	Well, That's good to know! __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

07-19-2013, 04:51 PM	#19
Zorba User Join Date: Feb 2013 Location: Merritt Island, Fl Posts: 952 Thanks: 777 Thanked 527 Times in 290 Posts	Yea - my first choice LGS to handle the FFL for my Luger couldn't do it. Told me he was totally OUT of storage space for incoming FFL transfers. He was even taking stuff home at nite! But his shop is pretty much a hole in the wall. So the "big" LGS could do the FFL - every time I'm in there, the place is PACKED. And it is a BIG gun shop! They tell me they're selling guns like crazy. The small guy is doing some work on a revolver for me, and he's backed up for months...

07-19-2013, 09:22 PM	#20
gimmejr User Join Date: Jul 2013 Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts	Itll probably be busy till the end of the year when all the new laws they are passing go into effect.