Front Sight Question Again <IMG SRC="/luger/graphics/indifferent.gif" BORDER=0 ALT=":|"> <img BORDER

Hugh · 03-24-2002, 12:04 AM

Here is a picture of both sides of the front sight on my 1900 commercial. As you can see, it is made integral with the barrel. It has not been pinned or soldered on. Has anyone ever seen another Luger front sight made like this? This barrel is original to the gun.

http://boards.rennlist.com/upload/fs1.jpg

03-24-2002, 08:33 AM

Hugh, I had something similar, but much lower, on a 20 commerical. It had a slot for the front sight blade running from front to back, rather side to side. I expect both are some sort of gunsmith repair. You're welcome to my used 7.65mm barrel, which I removed, with sight for $15 post paid, if you want to pursue this quest. Tom h.

Frank · 03-24-2002, 10:45 AM

03-24-2002, 03:16 PM

This is not a "Polish Target Lugerski".

Looks like this one shoots both ways.

Use Only with VERY HEAVY SHOOTING GLASSES.

ViggoG

Hugh · 03-24-2002, 03:40 PM

Frank · 03-24-2002, 03:59 PM

Kin ya jus plug one side up wid yur finner and git the bulet ta com out the udder side?

Hugh · 03-24-2002, 05:00 PM

03-24-2002, 05:13 PM

You've got too much time on your hands Hugh, need to keep the plumbing and guns apart.

Roadkill

03-24-2002, 12:04 AM	#1
Hugh RIP Join Date: Jun 2002 Location: Southeast Texas Swamp Posts: 2,460 Thanks: 2 Thanked 165 Times in 64 Posts	Front Sight Question Again Here is a picture of both sides of the front sight on my 1900 commercial. As you can see, it is made integral with the barrel. It has not been pinned or soldered on. Has anyone ever seen another Luger front sight made like this? This barrel is original to the gun. http://boards.rennlist.com/upload/fs1.jpg

03-24-2002, 08:33 AM	#2
tom h Guest Posts: n/a	Re: Front Sight Question Again Hugh, I had something similar, but much lower, on a 20 commerical. It had a slot for the front sight blade running from front to back, rather side to side. I expect both are some sort of gunsmith repair. You're welcome to my used 7.65mm barrel, which I removed, with sight for $15 post paid, if you want to pursue this quest. Tom h.

03-24-2002, 10:45 AM	#3
Frank RIP Patron LugerForum Patron Join Date: Jun 2002 Location: Hot & Dry PHX, AZ Posts: 2,078 Thanks: 24 Thanked 163 Times in 87 Posts	Which End does the Bullet come OUT? (EOM)

03-24-2002, 03:16 PM	#4
Viggo G Dereng Guest Posts: n/a	Re: This is not a "Polish Target Lugerski". Looks like this one shoots both ways. Use Only with VERY HEAVY SHOOTING GLASSES. ViggoG

03-24-2002, 03:40 PM	#5
Hugh RIP Join Date: Jun 2002 Location: Southeast Texas Swamp Posts: 2,460 Thanks: 2 Thanked 165 Times in 64 Posts	Had to use a "T" adapter to get this one on my gun!

03-24-2002, 03:59 PM	#6
Frank RIP Patron LugerForum Patron Join Date: Jun 2002 Location: Hot & Dry PHX, AZ Posts: 2,078 Thanks: 24 Thanked 163 Times in 87 Posts	Tis it fur shootin round corners? Kin ya jus plug one side up wid yur finner and git the bulet ta com out the udder side?

03-24-2002, 05:00 PM	#7
Hugh RIP Join Date: Jun 2002 Location: Southeast Texas Swamp Posts: 2,460 Thanks: 2 Thanked 165 Times in 64 Posts	yup, then ya suck on ya finger fer a wile ;^) (EOM)

03-24-2002, 05:13 PM	#8
R. Grady/Roadkill Guest Posts: n/a	Re: yup, then ya suck on ya finger fer a wile ;^) You've got too much time on your hands Hugh, need to keep the plumbing and guns apart. Roadkill