my profile |
register |
faq |
search upload photo | donate | calendar |
03-09-2012, 10:42 AM | #1 |
User
Join Date: Mar 2012
Location: Springfield, Missouri
Posts: 6
Thanks: 3
Thanked 0 Times in 0 Posts
|
Luger serial 600 series
Hello luger friends. I am new to this and just wanted to say hello and ask a question. I am looking at all matching 63x serial numbered luger. The guy tells me it was made in the late 1800s. I was thinking of buying it for my first luger. Does it sound legit? cold it be a fake? Any ides on value? What you pay for a luger like that sight unseen?
|
03-09-2012, 11:06 AM | #2 |
User
Join Date: Jun 2002
Location: San Mateo, California
Posts: 1,432
Thanks: 2
Thanked 71 Times in 56 Posts
|
Col. T, beware, you are about to step in "luger quicksand"! Late 1800 "Lugers" were prototypes, called "Borchardt-Lugers" and are essentially museum pieces, if not outright faked. If you are aware of the military serial numbering system, a three digit luger came around every 10,000 lugers or so. A three digit comercial luger could be an early 1900 model but could also be a contract luger, many of which are valuable. Rather than just "looking" at this luger, instead take photos and post them here for honest answers!
|
The following member says Thank You to drbuster for your post: |
03-09-2012, 12:47 PM | #3 |
User
Join Date: Mar 2008
Location: Marco Island, Florida
Posts: 4,867
Thanks: 1,685
Thanked 1,916 Times in 1,192 Posts
|
Welcome to the forum!
Ask if there are any letters stamped below that serial number. These numbers, when present, are part of the gun's serial number and will help correctly date your gun. As Herb said, good photos of all markings are essential for anybody here to provide you with help. What is the asking price? |
The following member says Thank You to alanint for your post: |
03-09-2012, 06:22 PM | #4 |
User
Join Date: Mar 2012
Location: Springfield, Missouri
Posts: 6
Thanks: 3
Thanked 0 Times in 0 Posts
|
Asking Price
$1,500. I will take some pictures soon and post them on here. Thanks everyone and anyone for their input, as this is all new to me. I have been wanting to get a Luger for a long while. I thought this sounded too good to be true. Anything eles I should look for on this gun?
|
03-09-2012, 06:43 PM | #5 |
User
Join Date: Mar 2012
Location: Springfield, Missouri
Posts: 6
Thanks: 3
Thanked 0 Times in 0 Posts
|
One Picture I took
Here is the only picture I took of the luger. More will come later.
Last edited by Col. T; 03-09-2012 at 06:50 PM. Reason: wrong picture |
03-09-2012, 07:10 PM | #6 |
User
Join Date: Mar 2008
Location: Marco Island, Florida
Posts: 4,867
Thanks: 1,685
Thanked 1,916 Times in 1,192 Posts
|
Your only photo is a bit confusing. Your picture shows a gun that was possibly made before mid 1913, (no stock lug), but it apparently has a holdopen device that was not retrofitted, (no obvious pin and proof stamp on the side of the receiver). There are no proofs on the right side of the receiver, which may or may not be right, depending on the balance of the gun.
It was most certainly made after 1906 The finish and grips appear to be original, but much more needs to be known before we can declare $1,500 a good price. To start, please photograpgh ALL markings and visible numbers on the outside of the gun as close up as you can and add a few more overall photos. Also, get a good photo of the frames backstrap, where the stock lug should be so that we can see if it was growned off or not. |
03-09-2012, 07:17 PM | #7 |
Patron
LugerForum Patron Join Date: Nov 2008
Posts: 4,047
Thanks: 578
Thanked 1,414 Times in 887 Posts
|
Is that in .30 Caliber Luger?
|
03-09-2012, 07:20 PM | #8 |
User
Join Date: Mar 2012
Location: Springfield, Missouri
Posts: 6
Thanks: 3
Thanked 0 Times in 0 Posts
|
Is not .30 or 9mm. I have forgot now what it was seems like there was a 7mm or something mentioned. ?
|
03-09-2012, 07:39 PM | #9 |
User
Join Date: Mar 2008
Location: Marco Island, Florida
Posts: 4,867
Thanks: 1,685
Thanked 1,916 Times in 1,192 Posts
|
7.65mm x 21mm is what we refer to as ".30 cal. Luger" So if you heard "7mm" it is probably a .30 cal. and a commercial, not a military pistol.
|
03-09-2012, 07:40 PM | #10 |
Moderator
2010 LugerForum Patron Join Date: Jun 2002
Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso
Posts: 7,022
Thanks: 1,090
Thanked 5,178 Times in 1,703 Posts
|
7.65mm is .30 caliber.
__________________
If it's made after 1918...it's a reproduction |
03-09-2012, 08:40 PM | #11 |
Super Moderator - Patron
LugerForum Life Patron Join Date: Dec 2009
Location: Eastern North Carolina, USA
Posts: 3,909
Thanks: 1,374
Thanked 3,110 Times in 1,510 Posts
|
Value is $600-800.
Commercial Lugers are generally not valued as highly as military proofed Lugers. I bought one in outstanding condition a couple of years ago for $650. If it's a 1920s era Commercial pistol it should have the stock lug on the back of the handstrap. Years ago, some people ground these off in fear of ATF interpretation of what was and was not Class III (Short barreled rifles). If this was ground off, it would put it at the lower end of the value range I suggested. Without photos of the top, barrel, receiver, barrel and frame markings it's hard to tell exactly what this is. So, you're possibly looking at either an uninformed or deceptive seller with a price that looks 2x to 2.5x more than it's worth. Marc
__________________
Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war. |
03-09-2012, 09:03 PM | #12 |
User
Join Date: Mar 2012
Location: Springfield, Missouri
Posts: 6
Thanks: 3
Thanked 0 Times in 0 Posts
|
I think you are right it is a 7.65mm. That sounds correct now.
I also am looking at another Luger. It is a 1914 erfurt with non matching serial numbers. Should I post in another area for info on that one or go a head and post pics and questions attached to this thread? Thanks again. |
03-09-2012, 09:16 PM | #13 | |
User
Join Date: Mar 2012
Location: Bucyrus OH
Posts: 60
Thanks: 1
Thanked 7 Times in 7 Posts
|
Quote:
|
|
03-09-2012, 09:27 PM | #14 |
User
Join Date: Mar 2012
Location: Springfield, Missouri
Posts: 6
Thanks: 3
Thanked 0 Times in 0 Posts
|
I think I will start a new post on the 1914. Not to confuse the two lugers and also run the comments together. Thanks.
|
03-10-2012, 12:50 AM | #15 |
Super Moderator
Eternal Lifer LugerForum Patron Join Date: Jun 2002
Location: North of Spokane, WA
Posts: 15,933
Thanks: 2,032
Thanked 4,530 Times in 2,092 Posts
|
I would put it in the 'new collectors' area, gets lots of hits and is a good place for beginners to the hobby.
Remember, a mismatched Erfurt may be the same value as the gun above, except nicer to shoot in 9mm... Ed
__________________
Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV |
03-10-2012, 11:08 AM | #16 |
Lifer
Lifetime Forum Patron Join Date: Jan 2004
Location: Georgia
Posts: 387
Thanks: 0
Thanked 40 Times in 29 Posts
|
Col T.
If you are seriously interested in purchasing a luger, I humbly suggest that you look at Simpson's Ltd to get an idea of top end costs and then I would restrict myself to being patient until one of the old time members of this forum has one for sale that you believe satisfies your need. In the meantime, I would do a lot of reading on his forum which has national and international experts (Ron Wood comes to mind as one of them as well as George Anderson) on lugers reading and and answering questions. But, in any case, best of luck with your search. LTC M. |
03-16-2012, 09:03 AM | #17 |
User
Join Date: Aug 2002
Location: South America
Posts: 948
Thanks: 598
Thanked 584 Times in 254 Posts
|
Col. T.
In addition to the wise advices above, it would be interesting to know what are you are looking for: a nice collectable Luger in top condition or something less valuable, to be taken to range and shot without worry about damage an historical/valuable gun?? A military or commercial gun? WWI or WWII? There are many, many variations... I'm asking this because they are cathegories completely apart from each other and their respective price ranges are also different. And welcome to the forum! Douglas |
|
|