Krieghoffs at Greg Martin Auctions

Likelugers2 · 05-31-2010, 08:34 PM

June 27, check it out!

Pumaonly · 05-31-2010, 09:58 PM

did I count right, 11 Krieghoff's? Ad lots of other nice stuff too

tracyp · 06-01-2010, 10:02 PM

I’m always suspicious when I see military lugers that look like new, especially ones that would have been in service for 9 years before the war ended. The early S has Ritzman grips, it’serial number 208 so it should have wood grips. Also, many of these have matching magazines, some have two.

When a luger is fired, the side plate rubs on the barrel extension. These look like they have no drag mark.

drbuster · 06-03-2010, 06:41 PM

I have had thoughts like this also, but it seems that HK's and Swiss lugers, for some reason, seem to age better. Many times when I thought a Krieghoff was refinished, someone with more knowledge and experience than I tells me it's original. HK's were just polished and finished with more care. I would have to closely scrutinize these Greg Martin Auction pieces before condemnation.

drbuster · 07-02-2010, 10:11 AM

It is obvious that Krieghoffs "lead the way" as evidenced by the recent gavel down prices. Only other lugers to even try to come close were Mauser banner contracts, one nice artillery rig and the 1908 Navy. The police and double date lugers never got out of the starting gate.

tracyp · 07-02-2010, 09:34 PM

I attended the auction. It's seems every luger had a matching magazine, which always bothers me. Here's a 36 Krieghoff. Look at the machining marks on the chamber. They don't show up as well in the picture. Krieghoff Lugers were of the highest quality. Has anyone seen marks like this on a Krieghoff?

Look at the top of the side plate, it's rounded. Krieghoffs are square.

George Anderson · 07-03-2010, 11:33 AM

I agree that the side plate is questionable but the receiver and machining marks are fine.

drbuster · 07-03-2010, 12:49 PM

Given the fact that HK's are very expensive now, the invitation and temptation are there to boost and even convert them. This just challenges the mettle of the potential buyer. Again, one has to hold the piece in the hands to best tell. And of course, the more one has seen, the more variation will be found accecptable. Matching magazines are showing up more now, in my opinion, as prime items are emerging from old collections. That said, if one considers all the many thousands of lugers out there, most of them have non matching magazines.

Norme · 07-03-2010, 12:49 PM

I have seen these chamber machining marks on other Krieghoffs, and only on Krieghoffs. In my opinion they support the authenticity of this piece. Regards, Norm

tomaustin · 07-03-2010, 11:35 PM

with such precision in manufacturing the piece, the easiest task on the weapon is the engraving.......

drbuster · 07-04-2010, 12:23 PM

Tom's question is understandable. One rarely sees HK's stamped like this. But overall this appears to be a genuine article Krieghoff. Despite the image of correctness (obsessiveness), things like this do get through.

John D. · 07-04-2010, 05:35 PM

Hi folks,

I'm not quite sure why you are focused upon the OUTSIDE of the side plate? It's the machining marks INSIDE the plate that will tell if it's the "real deal"..

Best to all..!

John

05-31-2010, 08:34 PM	#1
Likelugers2 User Join Date: Jan 2009 Location: Pennsylvania Posts: 26 Thanks: 0 Thanked 0 Times in 0 Posts	Krieghoffs at Greg Martin Auctions June 27, check it out!

05-31-2010, 09:58 PM	#2
Pumaonly User Join Date: Mar 2009 Posts: 23 Thanks: 0 Thanked 0 Times in 0 Posts	did I count right, 11 K's? did I count right, 11 Krieghoff's? Ad lots of other nice stuff too

07-02-2010, 09:34 PM	#6
tracyp User Join Date: Jun 2002 Location: Peoples Republic of Kalifornia Posts: 391 Thanks: 0 Thanked 2 Times in 2 Posts	I attended the auction. It's seems every luger had a matching magazine, which always bothers me. Here's a 36 Krieghoff. Look at the machining marks on the chamber. They don't show up as well in the picture. Krieghoff Lugers were of the highest quality. Has anyone seen marks like this on a Krieghoff? Look at the top of the side plate, it's rounded. Krieghoffs are square. Attached Thumbnails

07-03-2010, 11:35 PM	#10
tomaustin Lifer X5 Lifetime Forum Patron Join Date: Sep 2008 Location: texas Posts: 708 Thanks: 87 Thanked 522 Times in 201 Posts	is the artwork on the receiver of hk's always this misaligned?? with such precision in manufacturing the piece, the easiest task on the weapon is the engraving.......

06-01-2010, 10:02 PM	#3
tracyp User Join Date: Jun 2002 Location: Peoples Republic of Kalifornia Posts: 391 Thanks: 0 Thanked 2 Times in 2 Posts	I’m always suspicious when I see military lugers that look like new, especially ones that would have been in service for 9 years before the war ended. The early S has Ritzman grips, it’serial number 208 so it should have wood grips. Also, many of these have matching magazines, some have two. When a luger is fired, the side plate rubs on the barrel extension. These look like they have no drag mark.

06-03-2010, 06:41 PM	#4
drbuster User Join Date: Jun 2002 Location: San Mateo, California Posts: 1,432 Thanks: 2 Thanked 71 Times in 56 Posts	I have had thoughts like this also, but it seems that HK's and Swiss lugers, for some reason, seem to age better. Many times when I thought a Krieghoff was refinished, someone with more knowledge and experience than I tells me it's original. HK's were just polished and finished with more care. I would have to closely scrutinize these Greg Martin Auction pieces before condemnation.

07-02-2010, 10:11 AM	#5
drbuster User Join Date: Jun 2002 Location: San Mateo, California Posts: 1,432 Thanks: 2 Thanked 71 Times in 56 Posts	It is obvious that Krieghoffs "lead the way" as evidenced by the recent gavel down prices. Only other lugers to even try to come close were Mauser banner contracts, one nice artillery rig and the 1908 Navy. The police and double date lugers never got out of the starting gate.

07-03-2010, 11:33 AM	#7
George Anderson Lifer Lifetime Forum Patron Join Date: Jul 2002 Location: VA Posts: 3,592 Thanks: 1,773 Thanked 2,529 Times in 787 Posts	I agree that the side plate is questionable but the receiver and machining marks are fine.

07-03-2010, 12:49 PM	#8
drbuster User Join Date: Jun 2002 Location: San Mateo, California Posts: 1,432 Thanks: 2 Thanked 71 Times in 56 Posts	Given the fact that HK's are very expensive now, the invitation and temptation are there to boost and even convert them. This just challenges the mettle of the potential buyer. Again, one has to hold the piece in the hands to best tell. And of course, the more one has seen, the more variation will be found accecptable. Matching magazines are showing up more now, in my opinion, as prime items are emerging from old collections. That said, if one considers all the many thousands of lugers out there, most of them have non matching magazines.

07-03-2010, 12:49 PM	#9
Norme Always A Lifetime Forum Patron Join Date: Jul 2009 Location: Colorado Posts: 2,417 Thanks: 226 Thanked 2,603 Times in 933 Posts	I have seen these chamber machining marks on other Krieghoffs, and only on Krieghoffs. In my opinion they support the authenticity of this piece. Regards, Norm

07-04-2010, 12:23 PM	#11
drbuster User Join Date: Jun 2002 Location: San Mateo, California Posts: 1,432 Thanks: 2 Thanked 71 Times in 56 Posts	Tom's question is understandable. One rarely sees HK's stamped like this. But overall this appears to be a genuine article Krieghoff. Despite the image of correctness (obsessiveness), things like this do get through.

07-04-2010, 05:35 PM	#12
John D. Administrator & Site Owner LugerForum Patron Join Date: Jun 2002 Location: A Little NE of Somewhere... Posts: 2,651 Thanks: 477 Thanked 515 Times in 128 Posts	Hi folks, I'm not quite sure why you are focused upon the OUTSIDE of the side plate? It's the machining marks INSIDE the plate that will tell if it's the "real deal".. Best to all..! John