Nickel Luger - Page 2

lugerholsterrepair · 02-26-2008, 03:43 PM

Larry & Ron are both right of course. The pistol is not a rare enough model to seriously consider restoration. Besides, it's pretty cool the way it is!
Jerry Burney

Aaron · 02-26-2008, 07:33 PM

A pistol with such fine workmanship may have the name or initials of the gunsmith concealed somewhere. The first place I'd look would be under the grips.

Aaron · 02-28-2008, 10:15 AM

Sounds like you have the lightweight variations.

John Sabato · 02-28-2008, 11:40 AM

TAC,

Put a magazine in there and the hole will be filled up!

Lugerdoc · 02-29-2008, 10:23 AM

If the hole is just above and aft of the mag release, it may have been there for a police mag safety, that was removed, because they did not work. TH

John Sabato · 02-29-2008, 10:31 AM

Tom, I think TAC's British humor has escaped you this time... I suspect he was talking about the "hole" in the frame between the grips (magazine well)

The photos of this nickled Luger show no hole behind the grips, nor the small cutout on the flat side for the magazine safety to fit into...

02-26-2008, 03:43 PM	#21
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,763 Thanks: 4,868 Thanked 3,105 Times in 1,429 Posts	Larry & Ron are both right of course. The pistol is not a rare enough model to seriously consider restoration. Besides, it's pretty cool the way it is! Jerry Burney __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

02-28-2008, 11:40 AM	#24
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,152 Thanks: 3,003 Thanked 2,304 Times in 1,096 Posts	TAC, Put a magazine in there and the hole will be filled up! __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

02-29-2008, 10:23 AM	#25
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 736 Times in 483 Posts	If the hole is just above and aft of the mag release, it may have been there for a police mag safety, that was removed, because they did not work. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

02-29-2008, 10:31 AM	#26
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,152 Thanks: 3,003 Thanked 2,304 Times in 1,096 Posts	Tom, I think TAC's British humor has escaped you this time... I suspect he was talking about the "hole" in the frame between the grips (magazine well) The photos of this nickled Luger show no hole behind the grips, nor the small cutout on the flat side for the magazine safety to fit into... __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

02-26-2008, 07:33 PM	#22
Aaron Banned Join Date: Jun 2002 Location: Vista, CA Posts: 1,008 Thanks: 0 Thanked 9 Times in 9 Posts	A pistol with such fine workmanship may have the name or initials of the gunsmith concealed somewhere. The first place I'd look would be under the grips.

02-28-2008, 10:15 AM	#23
Aaron Banned Join Date: Jun 2002 Location: Vista, CA Posts: 1,008 Thanks: 0 Thanked 9 Times in 9 Posts	Sounds like you have the lightweight variations.