Luger asssembly problem

Neil Young · 10-19-2012, 12:14 PM

Okay, let me first confess to being a dumb a**. I've field stripped my Lugers many times with no problem, but I have just screwed up. When re-assembling one, I was evidently sloppy in insuring that the connector link did not stay below the main spring hook when the receiver was slid back into position. Now, the connector link is above the hook and I can't get the frame and receiver back apart to fix the problem. It will move back and forth a little bit, but it hangs up.

Surely I am not the only one to do this, so my plea is for help. How do I get out of this predicament?

10-19-2012, 12:14 PM	#1
Neil Young Lifer Lifetime Forum Patron Join Date: Jun 2008 Location: Scottsboro, Alabama Posts: 547 Thanks: 566 Thanked 443 Times in 168 Posts	Luger asssembly problem Okay, let me first confess to being a dumb a**. I've field stripped my Lugers many times with no problem, but I have just screwed up. When re-assembling one, I was evidently sloppy in insuring that the connector link did not stay below the main spring hook when the receiver was slid back into position. Now, the connector link is above the hook and I can't get the frame and receiver back apart to fix the problem. It will move back and forth a little bit, but it hangs up. Surely I am not the only one to do this, so my plea is for help. How do I get out of this predicament? __________________ Neil The hurrier I go the behinder I get. Sometimes it takes me all day to get nothing done.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode