Jap Type 14 Nambu

Shawn v. Il. · 10-13-2005, 06:42 PM

Hello Gents !
I just bought a near mint T14 Nambu ,19.5 date ALL Matching including the clip . I paid $375 for it , It was as low as the seller would go and the pistol was in such good shape I couldn't resist , so I may have paid too much .
The same seller has another one . 18.3 date ALL matching . The bad thing(s) are that the finish is only around a (conservative) 30% , The firing pin needs re-tipped , and it needs a clip/mag release spring . What should be the absolute TOP dollar that I should offer for a pistol in this shape . I know little of Jap weapons values , I guess I should stick with P08's & P38's

. Any how , any advise sure would be appreciated .
Shawn Grear

Shawn v. Il. · 10-13-2005, 06:45 PM

I forgot to add that the bore on the 18.3 pistol is in mint condition as well.
Shawn

Edward Tinker · 10-13-2005, 06:50 PM

Shawn, $375 was a good price. For the other one, well 30%, I don't think more than $250 and maybe less?

ed

Shawn v. Il. · 10-13-2005, 07:54 PM

Thanks a bunch Ed ! I just got some jpegs of both pistols if someone wants to post them ,just let me know and I'll foward them .
Shawn

Sieger · 10-15-2005, 01:54 AM

Shawn:

I'm starting a project, in a month or so, to develop accuracy loads for my several T-14s.

Hope you enjoy yours too!!!

Sieger

Edward Tinker · 10-15-2005, 12:10 PM

I can help post them, although you can post them yourself. Just go to upload and upload, copy the link and then paste it in the reply section here.

Ed

10-13-2005, 06:42 PM	#1
Shawn v. Il. User Join Date: Jun 2005 Location: Illinois Posts: 23 Thanks: 0 Thanked 0 Times in 0 Posts	Jap Type 14 Nambu Hello Gents ! I just bought a near mint T14 Nambu ,19.5 date ALL Matching including the clip . I paid $375 for it , It was as low as the seller would go and the pistol was in such good shape I couldn't resist , so I may have paid too much . The same seller has another one . 18.3 date ALL matching . The bad thing(s) are that the finish is only around a (conservative) 30% , The firing pin needs re-tipped , and it needs a clip/mag release spring . What should be the absolute TOP dollar that I should offer for a pistol in this shape . I know little of Jap weapons values , I guess I should stick with P08's & P38's . Any how , any advise sure would be appreciated . Shawn Grear

10-13-2005, 06:50 PM	#3
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,967 Thanks: 2,066 Thanked 4,596 Times in 2,117 Posts	Shawn, $375 was a good price. For the other one, well 30%, I don't think more than $250 and maybe less? ed __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

10-15-2005, 01:54 AM	#5
Sieger User Join Date: Jul 2003 Location: New York, NY Posts: 1,579 Thanks: 2,144 Thanked 402 Times in 251 Posts	Shooting One Shawn: I'm starting a project, in a month or so, to develop accuracy loads for my several T-14s. Hope you enjoy yours too!!! Sieger

10-15-2005, 12:10 PM	#6
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,967 Thanks: 2,066 Thanked 4,596 Times in 2,117 Posts	I can help post them, although you can post them yourself. Just go to upload and upload, copy the link and then paste it in the reply section here. Ed __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-13-2005, 06:45 PM	#2
Shawn v. Il. User Join Date: Jun 2005 Location: Illinois Posts: 23 Thanks: 0 Thanked 0 Times in 0 Posts	I forgot to add that the bore on the 18.3 pistol is in mint condition as well. Shawn

10-13-2005, 07:54 PM	#4
Shawn v. Il. User Join Date: Jun 2005 Location: Illinois Posts: 23 Thanks: 0 Thanked 0 Times in 0 Posts	Thanks a bunch Ed ! I just got some jpegs of both pistols if someone wants to post them ,just let me know and I'll foward them . Shawn