Navy luger with Artillery rear sight > Erfurt

Lugerdoc · 08-16-2005, 11:11 AM

Dirk, Over the years I have owned several LPO8 that had the barrel shortened the lenght of the front sight base to about 7&1/2"s and a fixed C96 broom front sight added. I suspect that this was the Depot's "quite & dirt" way of "fixing" a frozen adjustable fine tune front sight. I also had one, where the barrel length was cut down to only 4"s, which left a sighting radius of about 3 inches. The had to be the result of either a bulged barrel or some innane Versailles Tready regulation. TH

08-16-2005, 11:11 AM	#6
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	Dirk, Over the years I have owned several LPO8 that had the barrel shortened the lenght of the front sight base to about 7&1/2"s and a fixed C96 broom front sight added. I suspect that this was the Depot's "quite & dirt" way of "fixing" a frozen adjustable fine tune front sight. I also had one, where the barrel length was cut down to only 4"s, which left a sighting radius of about 3 inches. The had to be the result of either a bulged barrel or some innane Versailles Tready regulation. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode