1938 Hk - Sn 9938 (Tom A's new "baby")

John D. · 07-27-2005, 12:12 AM

Firing Pin Notice the relieved firing pin. This is correct. You will notice the firing pin and the retainer are both correctly proofed in this example.

Safety. Internally Ã¢?? within the frame, you will note the LWaA stamps on both the Thumb Lever (left) and the internal flat of Safety Lever. These are correct for this period of HK manufacture Ã¢?? but changed as production progressed.

Detail of the proofed Thumb Lever.

Magazine Release location Ã¢?? inside, rear towards the magazine:

~~~~

You can see the complete photo Gallery of this 1938 here........

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

07-27-2005, 12:12 AM	#5
John D. Administrator & Site Owner LugerForum Patron Join Date: Jun 2002 Location: A Little NE of Somewhere... Posts: 2,651 Thanks: 478 Thanked 517 Times in 129 Posts	Firing Pin Notice the relieved firing pin. This is correct. You will notice the firing pin and the retainer are both correctly proofed in this example. Safety. Internally Ã¢?? within the frame, you will note the LWaA stamps on both the Thumb Lever (left) and the internal flat of Safety Lever. These are correct for this period of HK manufacture Ã¢?? but changed as production progressed. Detail of the proofed Thumb Lever. Magazine Release location Ã¢?? inside, rear towards the magazine: ~~~~ You can see the complete photo Gallery of this 1938 here........