Turkish Police rig

drbuster · 07-15-2005, 03:20 PM

Opinions on this Turkish rig?

Herb · 07-15-2005, 05:14 PM

Herb, got a link??

drbuster · 07-15-2005, 06:19 PM

Herb, I have been spending almost hours trying to post my pictures. I also haven't had success on Still's Forum, which is supposed to be easier! I have followed the instructions for Still's Forum (and have been able to post pics successfully in the past), but get those red "x's". With this Forum, I can't seem to "cut and paste". I have this wonderful Turkish Police rig to post pictures of and I'm frustrated. I can feel for Tom Armstrong! Perhaps I can e-mail some to you?

Navy · 07-15-2005, 06:54 PM

drbuster,

I see the photocurse has you also. The cure is simple:

1. Pour a glass of the best bourbon you can buy into your computer
2. Don't worry about them steenking pictures
3. Install new motherboard
4 Send pix to Ed or John S and humbly ask for help
5. Get second glass of bourbon, consume and chill out.

Been there, got the T-shirt, and have the bourbon.

Tom A

drbuster · 07-15-2005, 07:05 PM

Tom, For one (and presumably you too) who was brought up before the computer revolution, I am stumped about "links", "cut and paste", "URL's", etc. Your advice #4 seems to be the most reasonable and the wife won't be able to detect any offensive odors!

Edward Tinker · 07-15-2005, 07:15 PM

There is no way you can cut and paste on either forum for the pictures.

The links you should be able to cut and paste at the top on the Address line. You highlite, copy and paste it here in the reply section...

To make the "link" show as a picture you have to add img at the front and /img at the rear of the link. No spaces and [] on each side. If you think it through logically, it all makes sense. The computer sees the [img ] and what is in between (ie the link) and the [/img] and it knows, oh a picture is located here, make it show.

Computers are not difficlut, it is just hard remembering the "correct" things to do to make them work. That and vodka or bourbon.

To copy and then paste a picture, you right click, save to your hard drive, naming and remembering where you put it. Then you "upload" it here...

Ed

drbuster · 07-15-2005, 07:20 PM

Ed, I get lost somewhere between right clicking and saving to my hard drive. I don't get far enough to remember where I put it, although I would probably have trouble there too. As Tom A. suggests above, can I e-mail you some photos of this really nice (and rare) rig so YOU can post them for me?

drbuster · 07-15-2005, 07:44 PM

drbuster · 07-15-2005, 07:50 PM

Here is more:

drbuster · 07-15-2005, 07:52 PM

And more:

drbuster · 07-15-2005, 07:54 PM

Right side:

drbuster · 07-15-2005, 07:59 PM

Mag

Ron Smith · 07-15-2005, 08:00 PM

Whoa Doc! That is VERY nice. Is it yours? Must have spent it's entire career in a desk.

Never knew Thompson-Center made Lugers.

Ron

drbuster · 07-15-2005, 08:02 PM

Yes, Ron, it IS mine!

Edward Tinker · 07-15-2005, 08:19 PM

looks very nice!

I know nothing about these types, as they are very rare!

Dwight Gruber · 07-15-2005, 08:21 PM

Doc,

In the words of the late lamented Frank Zappa, Wowie-Zowie!! That is one heckuva nice rig, many many congratulations on your acquisition and as many thanks for sharing it with us.

Who is the holster maker?

--Dwight

Edward Tinker · 07-15-2005, 08:22 PM

Akah he told me.

Ed

drbuster · 07-15-2005, 08:48 PM

Thanks for your comments, Dwight. Ed is right, the maker is AKAH. The firm made holsters for several commercial contracts by Mauser. Of interest, the magazine pouch is sewn on separately, in the WW1 style...very well made. I don't know how the pistol got out of Turkey in such good shape (witness #101 on Pheonix Investment Arms), but it obviously did. Mike Krause knows a collector who has one in TOTAL mint condition. Apparently the sear bar was defective and, believe it or not, it was just discarded and NEVER used!

drbuster · 07-15-2005, 10:24 PM

More pics.

mauro · 07-16-2005, 03:58 PM

Very beautiful!
Mauro

07-15-2005, 05:14 PM	#2
Herb User Join Date: Jun 2002 Location: Utah, in the land of the Sleeping Rainbow Posts: 1,457 Thanks: 0 Thanked 1 Time in 1 Post	Herb, got a link?? __________________ Utah, where gun control means a steady trigger pull

07-15-2005, 08:00 PM	#13
Ron Smith User Join Date: Feb 2004 Location: Orygun Posts: 4,243 Thanks: 118 Thanked 245 Times in 150 Posts	Whoa Doc! That is VERY nice. Is it yours? Must have spent it's entire career in a desk. Never knew Thompson-Center made Lugers. Ron __________________ I Still Need DWM side plate #49... if anyone runs across a nice one. What ~Rudyard Kipling~ said...

07-16-2005, 03:58 PM	#20
mauro FIREARM HISTORIAN AND AUT Join Date: Jun 2002 Location: Belgium Posts: 1,535 Thanks: 106 Thanked 350 Times in 129 Posts	Very beautiful! Mauro __________________ Mauro Baudino - www.lugerlp08.com www.paul-mauser-archive.com Mauser Company and Firearm Historian - Mauser Parabellum Certification Service.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-15-2005, 03:20 PM	#1
drbuster User Join Date: Jun 2002 Location: San Mateo, California Posts: 1,432 Thanks: 2 Thanked 71 Times in 56 Posts	Turkish Police rig Opinions on this Turkish rig?

07-15-2005, 06:19 PM	#3
drbuster User Join Date: Jun 2002 Location: San Mateo, California Posts: 1,432 Thanks: 2 Thanked 71 Times in 56 Posts	Herb, I have been spending almost hours trying to post my pictures. I also haven't had success on Still's Forum, which is supposed to be easier! I have followed the instructions for Still's Forum (and have been able to post pics successfully in the past), but get those red "x's". With this Forum, I can't seem to "cut and paste". I have this wonderful Turkish Police rig to post pictures of and I'm frustrated. I can feel for Tom Armstrong! Perhaps I can e-mail some to you?

07-15-2005, 06:54 PM	#4
Navy RIP Join Date: Jun 2002 Location: Dc 'burbs in Virginia Posts: 2,482 Thanks: 0 Thanked 16 Times in 10 Posts	drbuster, I see the photocurse has you also. The cure is simple: 1. Pour a glass of the best bourbon you can buy into your computer 2. Don't worry about them steenking pictures 3. Install new motherboard 4 Send pix to Ed or John S and humbly ask for help 5. Get second glass of bourbon, consume and chill out. Been there, got the T-shirt, and have the bourbon. Tom A

07-15-2005, 07:05 PM	#5
drbuster User Join Date: Jun 2002 Location: San Mateo, California Posts: 1,432 Thanks: 2 Thanked 71 Times in 56 Posts	Tom, For one (and presumably you too) who was brought up before the computer revolution, I am stumped about "links", "cut and paste", "URL's", etc. Your advice #4 seems to be the most reasonable and the wife won't be able to detect any offensive odors!

07-15-2005, 07:15 PM	#6
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,967 Thanks: 2,066 Thanked 4,596 Times in 2,117 Posts	There is no way you can cut and paste on either forum for the pictures. The links you should be able to cut and paste at the top on the Address line. You highlite, copy and paste it here in the reply section... To make the "link" show as a picture you have to add img at the front and /img at the rear of the link. No spaces and [] on each side. If you think it through logically, it all makes sense. The computer sees the [img ] and what is in between (ie the link) and the [/img] and it knows, oh a picture is located here, make it show. Computers are not difficlut, it is just hard remembering the "correct" things to do to make them work. That and vodka or bourbon. To copy and then paste a picture, you right click, save to your hard drive, naming and remembering where you put it. Then you "upload" it here... Ed

07-15-2005, 07:20 PM	#7
drbuster User Join Date: Jun 2002 Location: San Mateo, California Posts: 1,432 Thanks: 2 Thanked 71 Times in 56 Posts	Ed, I get lost somewhere between right clicking and saving to my hard drive. I don't get far enough to remember where I put it, although I would probably have trouble there too. As Tom A. suggests above, can I e-mail you some photos of this really nice (and rare) rig so YOU can post them for me?

07-15-2005, 07:44 PM	#8
drbuster User Join Date: Jun 2002 Location: San Mateo, California Posts: 1,432 Thanks: 2 Thanked 71 Times in 56 Posts

07-15-2005, 07:50 PM	#9
drbuster User Join Date: Jun 2002 Location: San Mateo, California Posts: 1,432 Thanks: 2 Thanked 71 Times in 56 Posts	Here is more:

07-15-2005, 07:52 PM	#10
drbuster User Join Date: Jun 2002 Location: San Mateo, California Posts: 1,432 Thanks: 2 Thanked 71 Times in 56 Posts	And more:

07-15-2005, 07:54 PM	#11
drbuster User Join Date: Jun 2002 Location: San Mateo, California Posts: 1,432 Thanks: 2 Thanked 71 Times in 56 Posts	Right side:

07-15-2005, 07:59 PM	#12
drbuster User Join Date: Jun 2002 Location: San Mateo, California Posts: 1,432 Thanks: 2 Thanked 71 Times in 56 Posts	Mag

07-15-2005, 08:02 PM	#14
drbuster User Join Date: Jun 2002 Location: San Mateo, California Posts: 1,432 Thanks: 2 Thanked 71 Times in 56 Posts	Yes, Ron, it IS mine!

07-15-2005, 08:19 PM	#15
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,967 Thanks: 2,066 Thanked 4,596 Times in 2,117 Posts	looks very nice! I know nothing about these types, as they are very rare!

07-15-2005, 08:21 PM	#16
Dwight Gruber User Join Date: Jun 2002 Location: Portland, Oregon Posts: 3,908 Thanks: 0 Thanked 1,330 Times in 435 Posts	Doc, In the words of the late lamented Frank Zappa, Wowie-Zowie!! That is one heckuva nice rig, many many congratulations on your acquisition and as many thanks for sharing it with us. Who is the holster maker? --Dwight

07-15-2005, 08:22 PM	#17
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,967 Thanks: 2,066 Thanked 4,596 Times in 2,117 Posts	Akah he told me. Ed

07-15-2005, 08:48 PM	#18
drbuster User Join Date: Jun 2002 Location: San Mateo, California Posts: 1,432 Thanks: 2 Thanked 71 Times in 56 Posts	Thanks for your comments, Dwight. Ed is right, the maker is AKAH. The firm made holsters for several commercial contracts by Mauser. Of interest, the magazine pouch is sewn on separately, in the WW1 style...very well made. I don't know how the pistol got out of Turkey in such good shape (witness #101 on Pheonix Investment Arms), but it obviously did. Mike Krause knows a collector who has one in TOTAL mint condition. Apparently the sear bar was defective and, believe it or not, it was just discarded and NEVER used!

07-15-2005, 10:24 PM	#19
drbuster User Join Date: Jun 2002 Location: San Mateo, California Posts: 1,432 Thanks: 2 Thanked 71 Times in 56 Posts	More pics.