Remember my slightly overstrawed P08?

Vlim · 02-23-2005, 10:54 AM

Hi Ron,

Thanks for the info.
( next time I'll use a smaller furnace at a lower temperature

)

There is no trace of any kind of sear or magazine safety ever being installed on this pistol and it's condition is good enough to tell. Which is kind of interesting.

After some extra cleaning and investigation of assorted small parts like the front toggle, the hold-open and the trigger they all have the '11' number on them. The receiver serial number is most definately 1511. Sadly no further sign of a letter suffix

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

02-23-2005, 10:54 AM	#3
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,053 Thanks: 1,036 Thanked 3,991 Times in 1,205 Posts	Hi Ron, Thanks for the info. ( next time I'll use a smaller furnace at a lower temperature ) There is no trace of any kind of sear or magazine safety ever being installed on this pistol and it's condition is good enough to tell. Which is kind of interesting. After some extra cleaning and investigation of assorted small parts like the front toggle, the hold-open and the trigger they all have the '11' number on them. The receiver serial number is most definately 1511. Sadly no further sign of a letter suffix