AMMO POWER, EJECTION PATTERN AND THE MAINSPRING??

unspellable · 04-28-2004, 06:05 PM

The S&B and Fiocchi loads are OK. Any current standard commercial 9 mm load will not be too hot unless it is marked +P in which case it isn't standard. Worry about the OAL rather than how hot it is. I would avoid the Russian commercial stuff as we have had reports of over pressure rounds.

A spring will take a set when first installed, that is why the Wolff 36 lbf spring in your pistol is slightly shorter than the new one, aside from spring to spring variation due to tolerances.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

04-28-2004, 06:05 PM	#13
unspellable User Join Date: Jun 2002 Location: Iowa Posts: 769 Thanks: 0 Thanked 19 Times in 11 Posts	The S&B and Fiocchi loads are OK. Any current standard commercial 9 mm load will not be too hot unless it is marked +P in which case it isn't standard. Worry about the OAL rather than how hot it is. I would avoid the Russian commercial stuff as we have had reports of over pressure rounds. A spring will take a set when first installed, that is why the Wolff 36 lbf spring in your pistol is slightly shorter than the new one, aside from spring to spring variation due to tolerances.