Artillery Fired Unexpectedly

estevewatson@juno.com · 10-06-2002, 11:24 AM

I had a similar problem with one of my artilleries. After replacing the trigger bar with a new one, the problem persisted. I then tried a firing pin from one of my other Lugers, which cured the problem. I am relieved that it was a firing pin (which I don't believe is a numbered part)rather than the trigger bar (which is). You might try such a switch to see if the problem gets cured. I also strongly support the comment that a competent Lugersmith should be consulted. This is one type of failure that is too dangerous to ignore.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

10-06-2002, 11:24 AM	#7
estevewatson@juno.com User Join Date: Aug 2002 Location: Dallas, Texas Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts	I had a similar problem with one of my artilleries. After replacing the trigger bar with a new one, the problem persisted. I then tried a firing pin from one of my other Lugers, which cured the problem. I am relieved that it was a firing pin (which I don't believe is a numbered part)rather than the trigger bar (which is). You might try such a switch to see if the problem gets cured. I also strongly support the comment that a competent Lugersmith should be consulted. This is one type of failure that is too dangerous to ignore.