G Date slide/toggle

LugerLizzie · 01-18-2004, 07:16 PM

Well, after taking in all the advise, and a couple of months of experimenting, I think I have my problem solved. After closer inspection I found that my Hold Open had formed a small burr of metal, or lip, as you may that would ever so slightly cause it to drag, or hang up on the notch in the gun handle/body where the hold open bar rests. After some very fine, and very very light filing to remove the burr from the hold open,I now have a "G Date" that fires perfectly with any kind of ammo, 100% of the time. Just thought I would pass it along....

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

01-18-2004, 07:16 PM	#10
LugerLizzie User Join Date: Aug 2003 Location: Calif. Coast Posts: 46 Thanks: 0 Thanked 0 Times in 0 Posts	Well, after taking in all the advise, and a couple of months of experimenting, I think I have my problem solved. After closer inspection I found that my Hold Open had formed a small burr of metal, or lip, as you may that would ever so slightly cause it to drag, or hang up on the notch in the gun handle/body where the hold open bar rests. After some very fine, and very very light filing to remove the burr from the hold open,I now have a "G Date" that fires perfectly with any kind of ammo, 100% of the time. Just thought I would pass it along....