1900 swiss

Dwight Gruber · 11-02-2002, 05:02 PM

[quote]Originally posted by Lugerdoc:
<strong>Orv, The Swiss were not shy about changing barrels as needed, but usually stayed with the thin tapered 7.65x120mm barrels on the long frame models. I'd check the serial numbers on the barrel very closely, but even then, the original may have been bored out to 9mm and may be difficult to tell. Tom H.</strong><hr></blockquote>

You can actually bore one of the slimline .30 barrels out to 9mm???

--Dwight

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

11-02-2002, 05:02 PM	#6
Dwight Gruber User Join Date: Jun 2002 Location: Portland, Oregon Posts: 3,908 Thanks: 0 Thanked 1,330 Times in 435 Posts	[quote]Originally posted by Lugerdoc: <strong>Orv, The Swiss were not shy about changing barrels as needed, but usually stayed with the thin tapered 7.65x120mm barrels on the long frame models. I'd check the serial numbers on the barrel very closely, but even then, the original may have been bored out to 9mm and may be difficult to tell. Tom H.</strong><hr></blockquote> You can actually bore one of the slimline .30 barrels out to 9mm??? --Dwight