High Noon

PaulP · 11-15-2004, 10:05 PM

Roadkill,

One thing about the Vaquero you may or may not be aware of, although it is a great pistol for the money, is that the internal design of the lockwork is different than that of the Colt. Because of this, when you **** it, it doesn't sound or feel the same as far as the number of "clicks". I have modified mine with a Power Custom Single Action Hammer and Trigger and now it has the half-**** notch which gives the extra click, but while it is better it still isn't the same (just my opinion only). The added half-**** notch also allows the cylinder chambers to better align with the loading gate. You may want to check this out when you look at one (it is possible that Ruger may have changed their design but I don't think so) and also compare it to some of the SAA clones. I also replaced the alloy Ejector Rod Housing with a Power Custom steel housing and rod. The Power Custom set-up more closely replicates the Colt's looks and action. Of course, unless you shoot both like I do, some of this may not be that important to you.

As to caliber, I would also recommend .45 Long Colt (LC). You probably can use .45 ACP dies for the LC but may have to watch out as to sizing of the mouth. Since the ACP headspaces on the mouth of the cartridge case, some manufacturer's dies may not allow a tight enough crimp. I do believe you will need a need shell holder as the LC is a rimmed case.

Not to preach, but do remember to only load five chambers. The SAA is really a lot of fun to shoot, I.m sure you will really enjoy having one.
Paul

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

11-15-2004, 10:05 PM	#18
PaulP User Join Date: Mar 2003 Location: Maryland Posts: 10 Thanks: 0 Thanked 0 Times in 0 Posts	Roadkill, One thing about the Vaquero you may or may not be aware of, although it is a great pistol for the money, is that the internal design of the lockwork is different than that of the Colt. Because of this, when you ** it, it doesn't sound or feel the same as far as the number of "clicks". I have modified mine with a Power Custom Single Action Hammer and Trigger and now it has the half- notch which gives the extra click, but while it is better it still isn't the same (just my opinion only). The added half-** notch also allows the cylinder chambers to better align with the loading gate. You may want to check this out when you look at one (it is possible that Ruger may have changed their design but I don't think so) and also compare it to some of the SAA clones. I also replaced the alloy Ejector Rod Housing with a Power Custom steel housing and rod. The Power Custom set-up more closely replicates the Colt's looks and action. Of course, unless you shoot both like I do, some of this may not be that important to you. As to caliber, I would also recommend .45 Long Colt (LC). You probably can use .45 ACP dies for the LC but may have to watch out as to sizing of the mouth. Since the ACP headspaces on the mouth of the cartridge case, some manufacturer's dies may not allow a tight enough crimp. I do believe you will need a need shell holder as the LC is a rimmed case. Not to preach, but do remember to only load five chambers. The SAA is really a lot of fun to shoot, I.m sure you will really enjoy having one. Paul