Take down pin

simoon · 12-15-2003, 08:12 PM

Sorry I have been away! Thanks for the response!

Takedown lever spring sure sounds right. It is a small wire like spring that pushes up on the lever to keep it from turning down (opening) while not under pressure (like when firing).

There are two small holes in the bottom and right side of the receiver where the ends protrude or nub.

It's a nice shooter I'm considering having restored so I'll take your advice on used original or new.

I'll drop an email to the doctor.

Thanks! What a site!

12-15-2003, 08:12 PM	#7
simoon User Join Date: Sep 2003 Location: Central Florida Posts: 27 Thanks: 0 Thanked 1 Time in 1 Post	Sorry I have been away! Thanks for the response! Takedown lever spring sure sounds right. It is a small wire like spring that pushes up on the lever to keep it from turning down (opening) while not under pressure (like when firing). There are two small holes in the bottom and right side of the receiver where the ends protrude or nub. It's a nice shooter I'm considering having restored so I'll take your advice on used original or new. I'll drop an email to the doctor. Thanks! What a site! __________________ Good judgement comes from experience... experience comes from bad judgement.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode