Sleeve Insertion

Karl · 08-07-2002, 04:40 PM

I took the sleeved Luger to the range today. It functioned perfectly, no feeding problems, spent brass looked normal. I am unable to give a clear account of accuracy because it shoots so high that I had to use Kentucky windage just to get holes in the paper (the sleeve offset at the muzzle is at 12 o'clock). Anyway, I was still able to achieve about a 3" group at 50'. So despite the poor workmanship it seems to work OK. KFS

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

08-07-2002, 04:40 PM	#29
Karl Lifer - Twice Over Lifetime Forum Patron Join Date: Jun 2002 Location: Savannah Posts: 532 Thanks: 0 Thanked 283 Times in 124 Posts	I took the sleeved Luger to the range today. It functioned perfectly, no feeding problems, spent brass looked normal. I am unable to give a clear account of accuracy because it shoots so high that I had to use Kentucky windage just to get holes in the paper (the sleeve offset at the muzzle is at 12 o'clock). Anyway, I was still able to achieve about a 3" group at 50'. So despite the poor workmanship it seems to work OK. KFS