Two questions

Steve Richards · 10-19-2002, 09:01 PM

Thank you to all who responded to my questions. I think that I solved the problems. On the AE, I found a side plate that worked and compared the trigger levers. My trigger lever was thicker on th part that operates against the sear. I removed some material until it apears to work. At least it works by hand now.

On the artillery that locked open with one round in the magazine, I went back to the e-book on luger mechanics and they descrbed the exact problem and said that it was fairly common. I then followed their instructions to remove a little material from the hold open lever where it is pushed up by the knob on the magazine until the problem went away.

Again, Thank You to everyone. <img src="graemlins/xyxwave.gif" border="0" alt="[bigbye]" />

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-19-2002, 09:01 PM	#1
Steve Richards User Join Date: Jun 2002 Location: Beaverton, Oregon Posts: 487 Thanks: 0 Thanked 1 Time in 1 Post	Thank you to all who responded to my questions. I think that I solved the problems. On the AE, I found a side plate that worked and compared the trigger levers. My trigger lever was thicker on th part that operates against the sear. I removed some material until it apears to work. At least it works by hand now. On the artillery that locked open with one round in the magazine, I went back to the e-book on luger mechanics and they descrbed the exact problem and said that it was fairly common. I then followed their instructions to remove a little material from the hold open lever where it is pushed up by the knob on the magazine until the problem went away. Again, Thank You to everyone. <img src="graemlins/xyxwave.gif" border="0" alt="[bigbye]" />