8 mm mag

Roadkill · 01-12-2003, 07:40 PM

Since the consensus is in another direction this is irrelevant, but a Luger magazine would definitely work in a Nambu with minimal modification. Length is less than 2mm on both long and short side, width is less than 2mm, thickness 2.5mm different with the Luger being on the small side in every comparison. The loading button on the Luger mag is in the way though. If it has not been flattened it won't fit. Wouldn't take much though.

rk

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

01-12-2003, 07:40 PM	#8
Roadkill User Join Date: Jun 2002 Posts: 1,634 Thanks: 1 Thanked 28 Times in 17 Posts	Since the consensus is in another direction this is irrelevant, but a Luger magazine would definitely work in a Nambu with minimal modification. Length is less than 2mm on both long and short side, width is less than 2mm, thickness 2.5mm different with the Luger being on the small side in every comparison. The loading button on the Luger mag is in the way though. If it has not been flattened it won't fit. Wouldn't take much though. rk